WIRED REMOTE CONTROLLER. Panasonic CS-KE24NKU, CS-KE18NKU

Cleaning the main unit and remote controller

Removing and remounting the air intake grille

CARE AND CLEANING (CONTINUED)

• Wipe clean using a soft, dry cloth.

• To remove stubborn dirt, moisten a cloth in warm water no hotter than 104 °F, wring thoroughly, and then wipe.

• The air intake grille can be removed in order to wash it with water.

Refer to “How to remove the filter” and “How to replace the filter” on page 23.

When using a footstool or the like, be careful not to let it tip over.

CAUTION

Washing the grille with water

• Clean the grille gently using a soft sponge, or the like. Then wipe away any remaining moisture.

• Neutral detergent may be used to remove stubborn dirt. Then rinse thoroughly with water and wipe away any remaining moisture.

WIRED REMOTE CONTROLLER

A separately sold wired remote controller (CZ-RD515U) used with this air conditioner is also available. If you wish to use the wired remote control function, you will need to purchase both the optional wired remote controller and its connection kit (CZ-RC515U).

24