Inserting the Batteries into the Remote. celcus LED32167FHDCNTD

through the available sources by pushing the button up or down.

To turn the TV off: Press the middle of the button down

Information for Users on Disposal of Old

Equipment and Batteries into standby mode.

Inserting the Batteries into the Remote

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product

Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment

(observe the correct polarity) Replace the cover.

facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Products

Battery

Connect Power

IMPORTANT: The TV set is designed to operate on the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet.

Antenna/Cable Connection

TV Broadcasting

Receiving Channels

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Multimedia Interface are trademarks or

Number of Preset

Channels

Channel Indicator

RF Aerial Input

Operating Voltage

Audio

Audio Output Power

(WRMS.) (10% THD)

1000

On Screen Display

75 Ohm (unbalanced)

German+Nicam

2x6

Power Consumption

Weight

TV Dimensions DxLxH

(with foot)

TV Dimensions DxLxH

(without foot)

Display

Operation temperature and operation humidity:

65W

205 x 743 x 493

39 x 743 x 451

16/9 32” humidity max

English - 4 -