The celcus LED32167FHDCNTD is a feature-rich TV that offers a wide range of entertainment options. With its built-in Freeview tuner, you can access a variety of digital TV channels without the need for a separate set-top box. The TV also has a built-in DVD player, so you can watch your favorite movies and TV shows without having to connect an external device. Additionally, the TV has a USB port, which allows you to connect a USB drive or other USB device to play media files such as photos, music, and videos.
advertisement
Getting Started
First Time Installation - USB Connections
Switching On/Off
To Switch the TV On
Cable Installation
To switch on the TV from standby mode either:
Press the “ the remote control.
P+ / P or a numeric button on
Press the side function switch until the TV comes on from standby.
To Switch the TV Off
Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode.
To power down the TV completely, unplug the power cord from the mains socket.
Note : When the TV is switched to standby mode, the standby
LED can blink to indicate that features such as Standby Search,
Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode.
First Time Installation
Enter the frequency range manually by using the numeric button.
Note: Searching duration will change depending on the selected search step.
Media Playback via USB Input
You can connect a 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV.
IMPORTANT!
any connections to the TV. The manufacturer will recording will not be selection screen is displayed. Select the desired problems with the formatting process. Do not repeatedly quickly plug and unplug the drive. This displayed next. Set your preferences using the continue.
Store mode option to be available in “Other settings” menu and your TV’s features will
Recording a Programme
IMPORTANT screen will be displayed. Select YES to proceed.
Note :
OK button to continue.
Aerial Installation
If you select AERIAL option from the Search Type the television will search for digital terrestrial TV broadcasts.
NOTE : You can press MENU button to cancel.
enable the recording feature.
GB capacity and should have 2.0 speed compatibility.
Note : Recorded programmes are saved into the
Press MENU
OK .
button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available).
play the recordings only via your TV.
Note
Radio recording is supported. The TV can record programmes up to ten hours.
Recorded programmes are split into 4GB partitions.
English - 7 -
advertisement