advertisement
Note : You can not switch broadcasts or view the Media Browser during the recording mode. While recording a programme or during the timeshifting, a warning message appears on the feature may not be available.
recording HD programmes.
Multipartition support is available. The maximum of two be formatted as the primary partition to be used for the
PVR ready features.
Some stream packets may not be recorded because
Watching Recorded Programmes
Select the Recordings Library from the Media
Browse r menu. Select a recorded item from the list (if previously recorded). Press the OK button to view the
Play Options . Select an option then press OK button.
Note: Viewing main menu and menu items will not be available during the playback.
Press the (STOP) button to stop a playback and during playback.
Slow Forward
If you press can not be used when teletext is ON. If a recording starts button to slow forward. Pressing button consecutively will change the playback speed.
turned off. Also teletext usage is disabled when there is an ongoing recording or playback.
Timeshift Recording
Press Format Disk : programme is paused and simultaneously recorded
IMPORTANT : again to resume the paused programme from where you stopped. Press the STOP button to stop timeshift recording and return to the live broadcast.
Note: Timeshift cannot be used while in radio mode.
Note : You cannot use the timeshift fast reverse feature before advancing the playback with the fast forward option.
Instant Recording
Press (RECORD) button to start recording an press (RECORD) button on the remote control again to record the next event on the EPG. In this programmed events for recording. Press (STOP) button to cancel instant recording. in such a case .
Note: If “USB is too slow” message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. Try connecting another USB disk.
Quick Menu
Quick Settings menu allows you to access some options quickly.
This menu includes Power Save Mode, Picture Mode,
Equalizer Settings, Favourites and Sleep Timer options. Press
Q.MENU
button on the remote control to view quick menu. See the followin g chapters for the details of the listed features.
Media Browser Menu this screen.
Start playback with and activate
Start playback with OK and activate
Start playback with OK/ and activate
T V p l a y s n e x t f i l e a n d l o o p t h e l i s t .
t h e s a m e f i l e w i l l b e p l a y e d i n a l o o p ( r e p e a t ) .
t h e f i l e w i l l b e p l a y e d i n a s h u f f l e .
English - 8 -
TV Menu Features and Functions
Picture Menu Contents
Mode be set to one of these options: Cinema Game Sport Dynamic and Natural .
Contrast
Brightness
Sharpness
Colour
Power Save Mode
Sets the lightness and darkness values of the screen.
Sets the brightness value for the screen.
Sets the sharpness value for the objects displayed on the screen.
Backlight
(Optional)
This setting controls the backlight level. The backlight function will be inactive if the Power Save Mode mode is set to Game .
Noise
Reduction reduce the amount of noise.
Advanced Settings
Dyanmic
Contrast
Colour Temp Sets the desired colour tone.
Noise Reduction setting to
Picture Zoom
HDMI True
Black
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)
Film Mode programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
Skin Tone
Colour Shift
RGB Gain
Reset
Autoposition
(in PC mode)
H Position (in
PC mode)
Resets the picture settings to factory default settings.(Except Game Mode)
English - 9 -
V Position (in PC mode)
Dot Clock (in PC mode)
Phase (in PC mode) to get a clear picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.
Sound Menu Contents
Volume Adjusts the volume level.
Equalizer
Balance
Headphone
Sound Mode
AVL (Automatic
Volume Limiting) in user mode.
Sets headphone volume.
Headphone/Lineout
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Dynamic Bass Enables or disables the Dynamic Bass.
Surround Sound
(optional)
Digital Out
Surround sound mode can be changed as On or Off.
Sets digital out audio type.
Settings Menu Contents
Conditional Access Controls conditional access modules when available.
Language Preferred and current settings will be available. Current settings can be changed only if the broadcaster supports.
Parental
Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.
Timers
Recording
Date/Time
Sources
Network Settings
Sets date and time.
Enables or disables selected source options.
Displays network settings.
English - 10 -
Other Settings: Displays other setting options of the TV set:
Menu Timeout
Scan Encrypted
Channels
Blue Background
Software Upgrade
Application Version
Hard of Hearing
Changes timeout duration for menu screens.
Activates or deactivates the blue background system when the signal is weak or absent.
Displays application version.
Enables any special feature sent from the broadcaster.
Audio description refers to an additional narration track for blind and visually
Audio Description
Note: The Audio Description sound feature is not available in recording or time shifting mode..
Auto TV Off
Standby Search
(Optional)
Store Mode
The Channel list will be updated and changed after this process.
DLNA Renderer share/play photos with your TV. See instructions of your sharing software for more
Power Up Mode
Virtual Remote
(optional)
Enables or disables the virtual remote feature.
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
(If available)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:
Searches and stores analogue stations. Searches and stores aerial DVB and analogue stations.
Searches and stores cable DVB and analogue stations.
Manual Channel Scan This feature can be used for direct broadcast entry.
Network Channel Scan Searches for the linked channels in the broadcast system.
Analogue Fine Tune available if no analogue channels are stored.
First Time Installation
English - 11 -
advertisement