advertisement
General TV Operation
Using the Channel List options.
Record / Delete Record Timer
After you have selected a programme in the
EPG OK button. Select the
Record option and press the OK button. After
To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.
the selected programme. should be entered. The factory default PIN number is
0000 settings menu will be displayed.
Menu Lock : Menu lock setting enables or disables the menu access.
Maturity Lock information from the broadcast and if this maturity programme and press the OK button and select the option Delete Rec. Timer . The recording will be cancelled.
Set Timer / Delete Timer
After you have selected a programme in the EPG
OK button. Select the Set Timer on Event option and press the OK can set a timer for future programmes. To cancel
Child Lock be controlled by the remote control. In this case the buttons on the TV will not work.
Set PIN
Note: If the Country option is set to France, you can use 4725 as the default code.
Electronic Programme Guide (EPG) press the OK button. Then select “ Delete Timer ” option. The timer will be cancelled.
Note : It is not possible to record two channels at the same time.
Connectivity Functions
Connecting to a Wired Network
Connect to your broadband ISP connection by connecting an ethernet cable to the ETHERNET current and next programmes. Press the button to view the EPG menu.
Up/Down/Left/Right: Navigate EPG.
OK: Displays programme options.
INFO: programme selected.
GREEN:
YELLOW: Switches to Timeline Schedule EPG.
BLUE:
(RECORD): The TV will start to record the selected
Ensure that Nero Media Home software is installed
2) to enable the connection to your TV.
Broadband ISP
Connection
IMPORTANT : Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature.
Note : Switching to a different broadcast or source is not available during a recording.
Programme Options
In EPG
Event Options menu.
Select Channel
In EPG to the selected channel.
OK button to enter the
Lan(Ethernet cable)
Rear of TV
Media Browser. Press the ‘Menu’ button and select
English - 12 -
use the Media Browser screen to access and play
PC/HDD/Media Player or any other devices that are connection for higher playback quality.
Network Settings section in the Settings menu.
your TV directly to the network wall outlet.
Broadband ISP
Connection
USB Inputs (Side of the TV)
Wireless Lan
Adaptor
A Wireless-N router (IEEE 802.11a/b/g/n) with
Connecting to a Wireless Network
IMPORTANT to use wireless network features.
change your SSID settings via the modem’s software. The TV cannot connect to networks with a hidden SSID.
For connecting to a wireless LAN network, you should perform the following steps:
1. Connect to your broadband ISP connection by connecting an ethernet cable to the ETHERNET
2. Ensure that Nero Media Home software is
3.
4.
Network Settings section in the Settings menu.
wireless gaming.
between other devices like computers.
The frequency and channel differ depending on the area.
The transmission speed differs depending on the distance and number of obstructions between the and the products that you use. The transmission may also be cut off or get disconnected depending the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission.
The location where the transmission is most effective differs depending on the usage environment.
n type modems. It is highly recommended that you should use IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.
with audio/video performance.
are any other modems around with the same SSID.
Your TV’s Network Settings include Wired and Wireless
Connection options. However, if your TV does not have a USB Wi-Fi dongle, you should use a Wired Connection.
If you try to connect Wireless Connection when your TV does not have a USB Wi-Fi dongle, a warning screen will appear and the TV will not get an IP address. Try connecting the LAN cable after this and then the TV will be able to get an IP address.
English - 13 -
advertisement