advertisement
select Network Type as Wired Device
Network Type
Network type can be selected as Wired or Wireless
IP Address : Displays the current IP address.
Network Name : Connected networks’ name will be displayed.
Press GREEN button to switch to advanced mode and then press the OK button to edit settings.
TV set. Select this as Wired if you have connected to the whilst the wireless device selection osd is on the screen.
Connecting to your Cell Phone via WiFi
(Optional)
This section displays the status of the connection.
IP Address
to the advanced mode.
GREEN button and switch software.
Connect to your router following the steps stated above in the Wireless Connection section.
Advanced Mode
RED button to edit
OK
RETURN / BACK to cancel.
IMPORTANT use wireless network features. select Network Type as Wireless Device to start connection process.
phone via the Media Browser of your TV.
Enter the Media Browser menu and playback device selection OSD will be displayed. Select your cell phone’s ID and press OK to continue.
Note: This feature may not be supported by some cell phones.
Connectivity Troubleshooting
Wireless Network Not Available
Press YELLOW button to scan for wireless networks. should be plugged in properly (if available). If the wireless
Please select your desired network from the list. please enter the correct key by using the virtual navigation buttons and OK button on the remote control.
Wait until the IP the address is shown on the screen.
This means that the connection is now established. To
and press OK .
network in your home. Refer to the Wired Connection section for more information on the process.
the Network Settings menu screen.
Connection is Slow
See the instruction book of your wireless modem to right buttons. The help bar on the bottom of the dialog shows features that you may use. Press BLUE button to check your internet connection speed.
have a high speed connection for your modem.
Distruption during playback or slow reactions
settings menu for the wireless device mode.
Information
Configuration Status : Displays wi-fi status as connected or not connected.
English - 14 -
Using DLNA Network Service
CAUTION:
There may be some PC’s which may not be able to eases viewing process of digital electronics and makes security settings. (such as business PC’s).
connected to your home network.
Step 1: Nero Media Home
supplied Nero software should be installed.
Internet Portal
PORTAL mode using your program is not install to your PC. Please prepare your
PC with the provided Nero Media Home programme.
For more information about the installation, please refer to
Nero Media Home Installation section
Step 2: Connect to a Wired or Wireless Network
to a Wired/Wireless(optional) Network section to connect your TV to the internet. After the portal options.
Note: A broadband internet connection is required for high quality viewing. Ensure that the internet information.
Step 3: Play Shared Files via Media Browser
Select Media Browser by using Left or Right button from the main menu and press browser will be then displayed.
OK button. Media
Settings tab in the main media browser screen and press OK . In
View Style and change to
Folder using Left or Right button.
Please select desired media type and press OK.
internet portal.
Press “ ” button on your remote control and the portal application options will be displayed.
Application options will be displayed as shown in the template below. Available applications’ contents may change depending on the application content provider. message will be displayed after selecting the desired
GREEN
MENU to exit. this screen. Select the media server or network that you want to connect to by using “ ” or “ ” buttons and press OK button.
If you select the media type as Video and choose a
Note on PIP Window
If you switch to portal mode while watching TV will appear on the screen
.
Select Videos from this screen to list all the available
P+/P- buttons.
Current HDMI content will be displayed on the PIP go back to the main Media Browser screen and select media type as desired and then perform the network
HDMI source.
” or “ ” or “ ” to navigate between to the previous screen. network through DLNA .
function.
English - 15 -
advertisement