advertisement
Software Upgrade via the Aerial/Cable signal or over the Internet.
Software upgrade search via user interface
Simply navigate on your main menu. Choose
S e t t i n g s a n d s e l e c t t h e O t h e r S e t t i n g s menu. In Other Settings menu navigate on to the Software for Upgrade item and press OK button to check for a new software upgrade.
Note : Internet connection is needed. If an internet the remote control? Try once more. Also make sure the correct input source has been selected.
Is the antenna connected properly?
Is the antenna cable damaged?
Are suitable plugs used to connect the antenna?
No sound
download the upgrade. Press OK to continue with the reboot operation.
3 AM search and upgrade mode
While the TV is connected to an aerial signal. If
“
Sound is coming from only one speaker. Is the balance set to one extreme? See Sound Menu section.
Remote control - does not operate
The batteries may be exhausted. Replace the bateries.
Input sources - can not be selected
broadcast channels for new software upgrades. If software version.
Note: If the TV fails to come on after the upgrade unplug the
TV for 2 minutes and plug in again.
no device is connected.
Check the AV cables and connections if you have tried to connect a device.
Recording unavailable
Digital Teletext
Press button to view digital teletext information.
USB is too slow
and the OK button. The operation method may differ the instructions displayed on the digital teletext screen.
When the television broadcast.
Troubleshooting & Tips
Tv will not turn on
Make sure the power cord is plugged in securely to the wall outlet. The batteries in the remote control may be exhausted. Press the Power button on the TV.
Poor picture
Have you selected the correct TV system?
Appendix A: Nero MediaHome Installation
To install Nero MediaHome, please proceed as follows:
Note : To use DLNA function, this software should be installed to your PC.
1. Insert the Nero Media Home installation disc in your optical disc drive.
The Nero Multi Installer screen with a button to start the installation process will open automatically. check antenna access.
Check if you have entered the correct channel frequency if you have done manual tuning.
The picture quality may degrade when two devices are connected to the TV at the same time. In such
MediaHome installation disc.
2. Click on the button labeled Nero MediaHome
Essentials to start the installation process.
No picture
No Picture means that your TV is not receiving a transmission. Have you selected the correct button on displayed.
If necessary change installation language from the language selection menu before continuing.
English - 22 -
3. Click the Next button.
The integrated serial is displayed.
Please do not change displayed serial.
4. Click the Next button.
15.
Click Refresh icon to refresh. Click STOP
SERVER icon to stop server.
5. Please read the license agreement carefully and select the appropriate check box if you agree to the terms of the agreement. Installation is not possible without this agreement.
6. Click the Next button.
The Select Installation Type screen is displayed.
It is possible to choose between Typical, meaning
Custom to be installed and to choose the installation path.
7.
The Prerequisites screen is displayed.
availability of required third-party software on your PC.
If applications are missing they are listed and must be installed before continuing installation.
8. Click the Install button.
button will change to a Next button.
9. Click the Next button.
The Ready to Start Installation Process screen automatically. A progress bar informs you of the progress of the installation process.
10.
The Help us to Enhance Nero Software screen is is collecting anonymous data to determine which
11. If you would like to help by participating in the check box and click the Next button.
displayed.
12. Click the Exit button.
13. A shortcut called Nero MediaHome 4 is now placed on your desktop
Congratulations!
MediaHome 4 on your PC.
14. Run Nero MediaHome by pressing shortcut icon.
Click ADD icon from LOCAL FOLDERS to add the folder you want to share with the network. Select the folder that you want to share and click START
SERVER .
English - 23 -
advertisement