Display. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH


Add to my manuals
124 Pages

advertisement

Display. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH | Manualzz

Display

Procedure Program each item as follows:

• POWER SAVE (Use the numeric entry)

Time of the power save (2 digits: 1 to 99 minutes,

0:100minutes).

• P. SAVE AT TM (Use the selective entry)

Power saving during time display:

YES: Enables power saving during time display.

NO: Disables power saving during time display.

Printer

Procedure Program each item as follows:

• DENSITY (Use the numeric entry)

Select a density level (2 digits: 00 to 99).

00: 89% for standard

50: 100% for standard

99: 111% for standard

Online

Procedure

The screen continues.

Program each item as follows:

• TERMINAL No. (Use the numeric entry)

Terminal number (6 digits: 0 to 999999).

• CI SIGNAL (Use the selective entry)

Sensing of the CI signal

NON: Disables sensing of the CI signal.

SENSING: Enables sensing of the CI signal.

• LINE FORM (Use the selective entry)

Programming of the modem control

FULL: Full duplex system.

HALF: Half duplex system.

• BAUD RATE (Use the selective entry)

Transmission data rate.

38400 bps 19200 bps

9600 bps 4800 bps

• START CODE (Use the numeric entry)

Start code (3 digits: 0 to 127)

• END CODE (Use the numeric entry)

End code (3 digits: 0 to 127)

• TIME OUT (Use the numeric entry)

Programming of the time-out time (3 digits: 1 to 255 sec.)

92

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Large, easy-to-read LCD display.
  • Fast and quiet thermal printer.
  • Durable cash drawer that can hold a large amount of cash.
  • Ability to program up to 1000 PLUs.
  • Easy-to-use interface makes it simple to operate.
  • Compact, lightweight design takes up minimal counter space

Related manuals

Frequently Answers and Questions

How do I connect the cash register to my computer?
The cash register can be connected to a computer using the RS232 connector or SD card slot.
How do I program the cash register?
The cash register can be programmed using the keyboard or a PC.

advertisement

Table of contents