In Case of Power Failure. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH


Add to my manuals
124 Pages

advertisement

In Case of Power Failure. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH | Manualzz

d

Operator Maintenance

In Case of Power Failure

When power is lost, the register retains its memory contents and all information on sales entries.

• When power failure is encountered in register idle state or during an entry, the register returns to the normal state of operation after power recovery.

• When power failure is encountered during a printing cycle, the register carries out the correct printing procedure after power recovery.

In Case of Printer Error

If the printer runs out of paper, the printer will stall, and “PAPER EMPTY” will appear on the display. Key entries will not be accepted. Referring to “Replacing the Paper Roll” in this chapter, install a new paper roll in the proper position, then press the printing.

L key. The printer will print the power failure symbol and resume

If the print roller arm comes up, the printer stalls, and “PAPER EMPTY” will appear on the display. Key entries will not be accepted. Push down the arm until it is securely locked, then press the printer will print the power failure symbol and resume printing.

L key. The

Cautions in Handling the Printer and Recording Paper

Cautions in handling the printer

• Avoid the following environments:

Dusty and humid places

Direct sunlight

Iron powder (A permanent magnet and electromagnet are used in this machine.)

• Never pull the paper when the print roller arm is locked. First lift up the arm, and then remove the paper.

• Never touch the surface of the printer head and print roller.

Cautions in handling the recording paper (thermal paper)

• Use only the paper specified by SHARP.

• Do not unpack the thermal paper until you are ready to use it.

• Avoid heat. The paper will color at around 70°C.

• Avoid dusty and humid places for storage. Avoid direct sunlight.

• The printed text on the paper can discolor under the following conditions:

Exposure to high humidity and temperature

Exposure to the direct sunlight

Contact with glue, thinner or a freshly copied blueprint.

Heat caused by friction from scratching or other such means.

Contact with a rubber eraser or adhesive tape.

• Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed text with a photocopier.

111

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Large, easy-to-read LCD display.
  • Fast and quiet thermal printer.
  • Durable cash drawer that can hold a large amount of cash.
  • Ability to program up to 1000 PLUs.
  • Easy-to-use interface makes it simple to operate.
  • Compact, lightweight design takes up minimal counter space

Related manuals

Frequently Answers and Questions

How do I connect the cash register to my computer?
The cash register can be connected to a computer using the RS232 connector or SD card slot.
How do I program the cash register?
The cash register can be programmed using the keyboard or a PC.

advertisement

Table of contents