Replacing the Paper Roll. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH


Add to my manuals
124 Pages

advertisement

Replacing the Paper Roll. Sharp XE-A177WH, XE-A177BK, XEA177BK, XEA177WH | Manualzz

Replacing the Paper Roll

Recording paper specifications

Be sure to use paper rolls specified by SHARP.

The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.

Paper specification

Paper width:

Max. outside diameter: 80 mm

Quality:

57.5 ± 0.5 mm

High quality(0.06 to 0.08 mm thickness)

• Be sure to set a paper roll prior to using your machine, otherwise it may cause a malfunction.

Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.

(How to set the paper roll) (How to cut the paper end)

To the printer

To the printer

Incorrect Correct Correct Incorrect

Installing the Paper Roll

Always install the paper roll even when you set the register for not printing receipt in REG mode.

Print roller arm

1.

Remove the printer cover.

2.

Lift up the print roller arm.

3.

Set the paper correctly in the paper roll cradle.

NOTE

Before placing a new paper roll in the paper roll cradle, cut off the pasted (taped) part of the paper and confirm that the cut end of the paper is straight.

114

Paper positioning guides

4.

Feed the end of the paper along with the paper positioning guides as per the diagram.

5.

While holding down the paper, slowly close the print roller arm.

NOTE

If the print roller arm is not securely locked, printing is not done right. If this problem occurs, open the arm, and close the arm as instructed above.

6.

Cut off the excess paper and replace the printer cover.

7.

Press the r key to make sure the paper end comes out of the printer cover and clean paper appears.

NOTE

If the paper end does not come out, open the printer cover, and pass the paper end between the paper cutter and the paper guide of the printer cover, and replace the printer cover.

115

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Large, easy-to-read LCD display.
  • Fast and quiet thermal printer.
  • Durable cash drawer that can hold a large amount of cash.
  • Ability to program up to 1000 PLUs.
  • Easy-to-use interface makes it simple to operate.
  • Compact, lightweight design takes up minimal counter space

Related manuals

Frequently Answers and Questions

How do I connect the cash register to my computer?
The cash register can be connected to a computer using the RS232 connector or SD card slot.
How do I program the cash register?
The cash register can be programmed using the keyboard or a PC.

advertisement

Table of contents