Operating Modes. Sharp XE-A307, XEA307


Add to my manuals
146 Pages

advertisement

Operating Modes. Sharp XE-A307, XEA307 | Manualzz

2

Selecting an Operating Mode

When you turn the register on and press the m key, the mode selection window will appear on the display, listing available operating modes as shown below.

Mode selection window

Operating Modes

You can select any mode other than REG from the list in the mode selection window. Your register supports the following operating modes:

REG mode

OPXZ mode

OFF mode

VOID mode:

X1/Z1 mode

X2/Z2 mode

PGM mode

SD CARD mode

This mode allows you to enter various sales information. The mode selection window does not list this mode. To select this mode from the mode selection window, press the a key.

This mode allows clerks to take X or Z reports on their sales information.

This mode locks all operations of the register. When you select this mode, the window will disappear. Pressing any key turns the register ON.

This mode allows correction after finalizing a transaction.

This mode is used to take various daily total reports (X1/Z1 reports).

This mode is used to take various weekly or monthly reports (X2/Z2 reports).

This mode is used to program various items.

This mode allows you to save and load the data of your register to and from an SD card.

14

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents