7
Manager Mode
The manager mode is used when managerial decisions must be made concerning register entries, for example, for overriding limitations and for other various non-programming managerial tasks.
Normal register operations may also be performed in this mode.
NOTE
Entering the Manager Mode
To enter the manager mode, use the following procedure in the REG mode:
Procedure
99
Manager code
L
When “0” is programmed for the secret code
XXXX
Secret code
A
The secret code entry box will appear.
Display Example
If the code is correct, the register enters the manager mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overridden by placing the register in the manager mode.
Example This example presumes that the register has been programmed not to allow coupon entries over 2.00.
Key operation Print
REG-mode entries
Enter to the manager mode
3
250 .......Error
L
99 L
250 -
A
NOTE
• When a transaction is finalized, manager is automatically signed off.
• In the initial programming, the HALO function is programmed as "INVALID".
44
