Automatic Sequencing Key Programming. Sharp XE-A307, XEA307


Add to my manuals
146 Pages

advertisement

Automatic Sequencing Key Programming. Sharp XE-A307, XEA307 | Manualzz

Automatic Sequencing Key Programming

If you program frequently performed key operations for the AUTO keys, you can enter those key operations simply by pressing the corresponding AUTO keys in key operations.

Key Text

Procedure

1.

In the SETTING window, select “13 AUTO KEY.”

• The AUTO KEY window will appear.

2.

Select “1 KEY TEXT” by the A key.

3.

Select the pertinent Auto key from the key list by the A key.

4.

Enter the title of the operation for the key sequence to allocate.

TEXT: up to 12 digits

112

Key Sequence

Procedure

1.

In the SETTING window, select “13 AUTO KEY.”

• The AUTO KEY window will appear.

2.

Select “2 KEY SEQUENCE” by the A key.

3.

Select the pertinent Auto key from the key list by the A key.

Example

4.

Enter the key operation sequence by any key except the

V key.

The register allows to program up to 25 keys for each AUTO key.

5.

To terminate the procedure enter the V key, the confirmation window will appear for sequence data saving.

Select “SAVE” or “ABANDON” and enter the A key.

In case of the X1 General report printing.

Key operation m

4=(select X1/Z1 MODE)

A

2=(select READING)

A

1=(select GENERAL)

V A

113

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents