Using the Built-in Expression Pedal. Zoom Tri Metal TM-01, G2.1NU, G21U, G2.1u

Editing a Patch

The patches of the G2.1u can be freely edited by changing the effect parameter settings. Try editing the currently selected patch to create your own sound.

Select the effect module

Turn the Module selector to select the effect module to edit. The following settings are available.

(5)

(4)

(3)

(2)

(1)

(6)

(7)

(8)

(9)

(10)

(6) EXTRA EQ/CABI&MIC module

(10) Pedal/foot switch related parameters

When you switch to a different module, the effect type currently selected for that module is shown on the display. While the G2.1u is in edit mode, a dot appears in the bottom right of the display.

Effect type

F C

Dot shows that unit is in edit mode

14

To switch an effect module on and off

To switch the selected module between ON and OFF, press one of the [

W

]/[

Q

] foot switches.

The indication "oF" appears on the display.

When you press one of the foot switches again, the indication returns to the previous condition.

O F

ZOOM G2.1u

Editing a Patch

Terminate the edit mode

To terminate the edit mode and return to the play mode, set the

Module selector to the "PLAY" position.

NOTE When you return to play mode and select another patch, the changes you have made in edit mode will be lost unless you store the patch first. To retain the changes, store the patch as described on page 16.

Change the parameter value

To change the setting value of effect parameters, use the Parameter knobs

1 – 3.

Which parameter is assigned to a knob depends on which effect module/effect type is selected. For information on parameters for effect modules/effect types, see page 27 – 34.

When you turn a Parameter knob, the corresponding LED lights up and the display briefly shows the current value of the respective parameter.

5 5

NOTE When a module that is set to OFF is selected, the display will show "oF".

Select the effect type

To switch the effect type of the selected module, use the BANK [-]/[+] keys.

B L

NOTE If you press the BANK [-]/[+] keys for a module that is set to OFF, the module will be turned ON.

For modules that have only one effect type, pressing the BANK [-]/[+] keys has no effect.

ZOOM G2.1u

15

Storing/Copying Patches

Storing/Copying Patches

An edited patch can be stored in a bank of the user area (A – d). It is also possible to store an existing patch in another location to create a copy.

In play mode or edit mode, press the [STORE] key.

The bank and patch number are shown on the display as a flashing indication.

A 0

NOTE Patches of banks in the preset area (0 –

3) are read-only. No patches can be stored or copied into these locations. If you press the [STORE] key while a patch from the preset area is selected, the patch "A0" (bank A, patch number 0) will be selected automatically as default store/copy target.

Select the store/copy target bank

To select the store/copy target bank, use the BANK [-]/[+] keys.

D 0

NOTE Only a bank of the user area (A – d) can be selected as store/copy target bank.

16 ZOOM G2.1u

ZOOM G2.1u

To cancel the store process

To cancel the store process, operate the

Module selector before pressing the [STORE] key again ( ).

Press the [STORE] key once more

When the store/copy process is completed, the G2.1u returns to the previous mode, with the target patch being selected.

D 4

Specify the store/copy target patch number

To specify the store/copy target patch number, use the [

W

]/[

Q

] foot switches.

D 4

17