Panel Navigation. Balboa Water Group Revolution System 042412, Revolution 042412
Add to My manuals74 Pages
advertisement
WARM
LIGHT
COOL
Transforming the Control of Hot Tubs
Revolution
Panel Navigation
Navigating the entire menu can be accomplished with two buttons:
1) Either temperature button (also, if the panel has a single TEMP icon)
2) The Light button
NOTE: Hereafter, all temperature buttons (i.e., “Warm” and “Cool”) will be referred to as a TEMP button.
Warm/Cool Temperature Buttons
t t
An “Action” Button: t
Allows changing the Set Temperature
Provides a flashing screen, which prompts the user for further action
Changes preferences within a menu
Light Button
A “Choose” Button, depending on control panel configuration: t Turns the LED lights on and off t t
Enters the menus when numbers are flashing
Scrolls through the menu t Makes a selection (“Enter”)
Waiting for 10 seconds will return the panel to normal operation and a display of spa status.
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
advertisement
Related manuals
advertisement
Table of contents
- 9 Revolution Features
- 10 Revolution Specifications
- 11 Revolution Components
- 12 System Dimensions
- 14 Menus & Panel Operation
- 14 TP Panel Series
- 15 Panel Navigation
- 15 Warm/Cool Temperature Buttons
- 15 Light Button
- 16 Main Menu -- Revolution TP Series Control Panels
- 17 Temperature Adjustment
- 18 Dual Temperature Ranges
- 19 Setting a High Temperature Range
- 20 Setting a Low Temperature Range
- 22 Spa Light
- 23 Mode -- Ready and Rest
- 25 Choosing between Ready and Rest Mode
- 27 HOLD (Standby)
- 28 Drain Mode (if available)
- 29 LOCK (Restricting Panel Operation)
- 31 UNLK (Unlock, Allowing Panel Operation)
- 33 Setting the 24 Hour Clock
- 35 Temperature Display (F/C)
- 38 Pumps, Operation
- 40 Circulation Pump Modes
- 40 Filtration and Ozone
- 41 Freeze Protection
- 41 Clean-up Cycle (optional)
- 42 System Default Operation Settings
- 42 Pumps
- 43 Adjusting Filtration
- 44 Adjusting Filtration Time for F
- 49 Filter Cycle 2: Optional Filtration
- 56 Continuous Filtration (24 Hour Filtration)
- 61 Reminder Messages
- 62 Suppressing Reminders
- 65 CHEK PH
- 65 CHEK CHEM
- 65 CLN FLTR
- 66 TEST GFCI
- 66 CHNG WATR
- 66 CLN COVR
- 67 TRT WOOD
- 67 CHNG FLTR
- 67 CHNG CART
- 68 Glossary