Temperature Adjustment. Balboa Water Group Revolution System 042412, Revolution 042412
Add to My manuals74 Pages
advertisement
Press TEMP buttons for desired set temperature.
Transforming the Control of Hot Tubs
Revolution
Temperature Adjustment
t Press TEMP buttons for desired set temperature. t The numbers flash during temperature adjustment. t Press LIGHT to return to main menu; or, main screen returns in 5 seconds.
Temperature Adjustment with One TEMP Button on Panel.
t 1st TEMP button press causes temperature to flash.
t t
2nd TEMP button press causes the temperature to change.
Press LIGHT to return to main menu; or, main screen returns in 5 seconds.
Press and Hold: Temperature Adjustment with One TEMP Button.
t If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change until the button is released. t If only one temperature button is available and the limit of the
Temperature Range is reached when the button is being held, the progression will reverse direction.
17
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
advertisement
Related manuals
advertisement
Table of contents
- 9 Revolution Features
- 10 Revolution Specifications
- 11 Revolution Components
- 12 System Dimensions
- 14 Menus & Panel Operation
- 14 TP Panel Series
- 15 Panel Navigation
- 15 Warm/Cool Temperature Buttons
- 15 Light Button
- 16 Main Menu -- Revolution TP Series Control Panels
- 17 Temperature Adjustment
- 18 Dual Temperature Ranges
- 19 Setting a High Temperature Range
- 20 Setting a Low Temperature Range
- 22 Spa Light
- 23 Mode -- Ready and Rest
- 25 Choosing between Ready and Rest Mode
- 27 HOLD (Standby)
- 28 Drain Mode (if available)
- 29 LOCK (Restricting Panel Operation)
- 31 UNLK (Unlock, Allowing Panel Operation)
- 33 Setting the 24 Hour Clock
- 35 Temperature Display (F/C)
- 38 Pumps, Operation
- 40 Circulation Pump Modes
- 40 Filtration and Ozone
- 41 Freeze Protection
- 41 Clean-up Cycle (optional)
- 42 System Default Operation Settings
- 42 Pumps
- 43 Adjusting Filtration
- 44 Adjusting Filtration Time for F
- 49 Filter Cycle 2: Optional Filtration
- 56 Continuous Filtration (24 Hour Filtration)
- 61 Reminder Messages
- 62 Suppressing Reminders
- 65 CHEK PH
- 65 CHEK CHEM
- 65 CLN FLTR
- 66 TEST GFCI
- 66 CHNG WATR
- 66 CLN COVR
- 67 TRT WOOD
- 67 CHNG FLTR
- 67 CHNG CART
- 68 Glossary