- No category
advertisement
▼
Scroll to page 2
of 42
V2426A Hardware
SMART RECOVERY Info
This screen allows you to view Smart Recovery information.
Regulatory Approval Statement
Load SMART RECOVERY Default
This setting allows you to load the Smart Recovery default value. Refer to the Smart Recovery Website at http://www.moxa.com/product/Smart-Recovery.htm
for details
Options: Yes (default), No
Security Settings
This screen allows you to configure a supervisor password.
A-9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 5 Package Checklist
- 5 Product Features
- 5 V2426A Hardware Specifications
- 8 Hardware Block Diagram
- 10 Appearance
- 11 Dimensions (unit = mm)
- 11 LED Indicators
- 12 Reset Button
- 12 Real Time Clock (RTC)
- 14 Installing the V2426A
- 16 Wiring Requirements
- 17 Connecting the Power
- 17 Grounding the Unit
- 17 Connecting Data Transmission Cables
- 17 Connecting to the Network
- 18 Connecting to a Serial Device
- 18 Installing a CFast Card
- 19 Connecting to a USB Device
- 20 DI/DO
- 21 Connecting to a DVI-I Monitor
- 21 Connecting to a Speaker or a Headphone
- 22 Installing an Expansion Module
- 22 Installing a SATA Hard Disk
- 22 RTC Battery Replacement
- 25 Entering the BIOS Setup
- 26 Main Information
- 26 Advanced Settings
- 27 Boot Configuration
- 27 HDC Configuration
- 27 Serial ATA Port 0 to 5
- 28 AHCI SALP
- 28 SATA Port 0 to 5—HotPlug
- 28 Video Configuration
- 29 Internal Graphics Device
- 29 IGD—DVMT Pre-Allocated
- 29 IGD—DVMT Size
- 29 IGD—Boot Type
- 30 Chipset Configuration
- 30 Power ON after Power Fail
- 30 Power Button
- 30 DO-0 Level
- 30 DO-1 Level
- 31 Hardware Monitor
- 32 SMART RECOVERY Info
- 32 Load SMART RECOVERY Default
- 32 Security Settings
- 33 Set Supervisor Password
- 33 Power Settings
- 33 Turbo Mode
- 34 Auto Wake on S5
- 35 Wake on LAN
- 35 Boot Settings
- 35 Boot Type
- 35 PXE Boot to LAN
- 35 Add Boot Options
- 36 USB Boot
- 36 EFI Device First
- 36 Boot Delay Time
- 36 Legacy
- 36 Normal Boot Menu
- 36 Boot Type Order
- 37 Hard Disk Drive/USB Drive
- 37 Exit Settings
- 38 Exit Saving Changes
- 38 Save Change Without Exit
- 38 Exit Discarding Changes
- 38 Load Optimal Defaults
- 38 Load Custom Defaults
- 38 Save Custom Defaults
- 38 Discard Changes
- 39 Upgrading the BIOS