Copyright and Trademarks Notice. MSI MS-3CB4, Optix MAG301CR2

Add to My manuals
31 Pages

advertisement

Copyright and Trademarks Notice. MSI MS-3CB4, Optix MAG301CR2 | Manualzz

ii

Preface

Copyright and Trademarks Notice

Copyright © Micro-Star Int’l Co�, Ltd� All rights reserved� The MSI logo used is a registered trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be trademarks of their respective owners� No warranty as to accuracy or completeness is expressed or implied� MSI reserves the right to make changes to this document without prior notice�

Revision

Revision

V1�0

Date

2020/07

Technical Support

If a problem arises with your product and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor� Alternatively, please visit https://www�msi�com/support/ for further guidance� iii

iv

Safety Instructions

Read the safety instructions carefully and thoroughly�

All cautions and warnings on the device or user’s manual should be noted�

Refer servicing to qualified personnel only.

Keep the User’s Guide that comes with the package for future reference�

To prevent fire or shock hazard, keep this device away from humidity and high temperature�

Lay this device on a reliable flat surface before setting it up.

Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet� Do not disable the protective earth pin from the plug� The device must be connected to an earthed mains socket-outlet�

Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.

The ventilator on the device is used for air convection and to prevent the device from overheating� Do not cover the ventilator�

Do not leave the device in an unconditioned environment with a storage temperature above 60 O C or below -20 O C, which may damage the device�

NOTE: The maximum operating temperature is around 40 O C�

When cleaning the device, be sure to remove the power plug� Use a piece of soft cloth rather than industrial chemical to clean the device� Never pour any liquid into the opening; that could damage the device or cause electric shock�

Place the power cord in a way that people are unlikely to step on it� Do not place anything on the power cord�

Preface v

iv

Preface

Always keep strong magnetic or electrical objects away from the device�

If any of the following situations arises, get the device checked by service

The power cord or plug is damaged�

Liquid has penetrated into the device�

The device has been exposed to moisture�

The device does not work well or you can not get it work according to user’s manual�

The device has dropped and damaged�

The device has obvious sign of breakage�

Green Product Features

Reduced energy consumption during use and stand-by

Limited use of substances harmful to the environment and health

Easily dismantled and recycled

Reduced use of natural resources by encouraging recycling

Extended product lifetime through easy upgrades

Reduced solid waste production through take-back policy

Environmental Policy

The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life�

Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products�

Visit the MSI website and locate a nearby distributor for further recycling information�

Users may also reach us at gpcontdev@msi�com for information regarding proper disposal, take-back, recycling, and disassembly of MSI products� v

★ Warning! Overuse of screens is likely to affect eyesight.

★ Recommendations:

1� Take a 10-minute break for every 30 minutes of screen time�

2� Children under 2 years of age should have no screen time� For children aged

2 years and over, screen time should be limited to less than one hour per day�

vi

CE Conformity

This device complies with the requirements set out in the Council

Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive

(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/

EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union�

FCC-B Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules� These limits are designed to provide reasonable protection against harmful interference in a residential installation� This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications� However, there is no guarantee that interference will not occur in a particular installation� If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:

■ Reorient or relocate the receiving antenna�

■ Increase the separation between the equipment and receiver�

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected�

■ Consult the dealer or an experienced radio/television technician for help�

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment�

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits�

This device complies with Part 15 of the FCC Rules� Operation is subject to the following two conditions:

1� this device may not cause harmful interference, and

2� this device must accept any interference received, including interference that may cause undesired operation�

MSI Computer Corp�

901 Canada Court, City of Industry, CA 91748, USA

(626)913-0828 www�msi�com

Preface vii

vi

Preface

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2012/19/EU, which takes effect on August

13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life�

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation

(Regulation EC No� 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://www�msi�com/html/popup/csr/evmtprtt_pcm�html

RoHS Statement

Japan JIS C 0950 Material Declaration

A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://www�msi�com/html/popup/csr/cemm_jp�html https://tw�msi�com/html/popup/csr_tw/cemm_jp�html

India RoHS

This product complies with the "India E-waste (Management and Handling) Rule 2016" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�

Turkey EEE Regulation

Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine Restriction of Hazardous Substances

The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment�

Vietnam RoHS

As from December 1, 2012, all products manufactured by MSI comply with Circular

30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products� vii

1

Getting Started

This chapter provides you with the information on hardware setup procedures�

While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity�

IMPORTANT

The illustrations are for reference only� Your monitor may vary in appearance�

Do not use any sharp objects on the monitor�

1-2

Package Contents

1� Monitor

2� Stand

3� Stand Base with Screw

4� Power Adapter

5� Power Cord

6� HDMI Cable (Optional)

7� DisplayPort Cable (Optional)

8� USB Upstream Cable (Optional)

9� Quick Start Guide

10� Warranty Card

11� VESA Cover Screws

* Contact your place of purchase or local distributor if any of the items is damaged or missing�

* Package contents may vary by country�

Getting Started

1-3

1-2

Getting Started

Installing the Monitor Stand

1� Align the latch of the stand to the monitor and push it�

2� When the stand is secured to the monitor, a click sound will be heard�

3� Connect the base to the stand and tighten the base screw to secure the base�

IMPORTANT

• Place the monitor on a soft, protected surface to avoid scratching the display panel�

The holes for installing the stand can be also used for wall mount� Please contact your dealer for proper wall mount kit�

1

1-3

2

3

1-4

Adjusting the Monitor

This monitor is designed to maximize your viewing comfort with its adjustment capabilities�

IMPORTANT

• Avoid touching the display panel when adjusting the monitor�

Avoid scratching the monitor, please lift the monitor to the highest and tilt the monitor backward to the maximum before pivoting�

-5 O 20 O

110mm

90 O 90 O

-30~30 O

Getting Started

1-5

1-4

Monitor Overview

1 2 3 4 5 6 7 8 9

Getting Started

10

11

13 12

1-5

1-6

1 Power Jack

2

USB 3�2 Gen 1 Type-B Upstream Port

For USB Upstream Cable�

IMPORTANT

Check the package for USB Upstream

Cable and connect it to the PC and monitor� Once this cable is connected, the USB Type A Downstream Ports on the monitor will be ready for use�

3 USB 3�2 Gen 1 Type-A Downstream Port

To Monitor

To PC

4 USB 3�2 Gen 1 Type-A Downstream Port

5 DisplayPort

6

HDMI Port

7

8

HDMI Port

USB Type-C Port

This port supports DisplayPort Alternate (DP Alt) Mode and up to 5V/3A

(15W) power delivery� It only carries video signals and doesn’t support data transmission function�

9 Headphone Jack

10 Navi Key

11 Kensington Lock

12 Power Button

13

MSI Macro Key

To activate Gaming OSD�

Getting Started

1-7

1-6

Getting Started

Connecting the Monitor to PC

1� Turn off your computer.

2� Connect the HDMI/ DisplayPort/ USB Type-C cable from the monitor to your computer�

3� Assemble the monitor power adapter & power cord� (Figure A)

4� Connect the power adapter to the monitor power jack� (Figure B)

5� Plug the power cord into the electrical outlet� (Figure C)

6� Turn on the monitor� (Figure D)

7� Power on the computer then monitor will auto detect signal source�

B

A

C

1-7

D

OSD Setup

This chapter provides you with essential information on OSD Setup�

IMPORTANT

All information is subject to change without prior notice�

2

Navi Key

The monitor comes with a Navi Key, a multi-directional control that helps navigate the

On-Screen Display (OSD) menu�

Navi Key

2-2

The Navi Key default settings are as follows�

Navi Key Hot Key

(When OSD menu is OFF)

Middle Button OSD Main Menu

Basic Operations

(When OSD menu is ON)

■ Entering submenus

■ Confirming a selection or setting

OSD Setup

2-3

2-2

OSD Setup

Navi Key

Up

Down

Left

Right

Hot Key

(When OSD menu is OFF)

Game Mode ■ Press Middle

Button to confirm selection and exit�

■ Press Up and

Down Buttons to adjust�

■ Press Left Button to cancel preview and exit without applying mode effect.

Screen Assistance ■ Press Middle

Button to confirm selection and exit�

■ Press Up and

Down Buttons to adjust�

■ Press Left Button to cancel preview and exit�

Alarm Clock

Input Source

■ Press Middle

Button to confirm selection and exit�

■ Press Up and

Down Buttons to select�

■ Press Left Button to cancel preview and exit�

■ Press Middle

Button to confirm selection and exit�

■ Press Up and

Down Buttons to select�

■ Press Left Button to exit�

Basic Operations

(When OSD menu is ON)

■ Selecting function menus and items

■ Allowing upward adjustment in function values

■ Selecting function menus and items

■ Allowing downward adjustment in function values

■ Selecting function menus and items

■ Exiting the current menu

■ Selecting function menus and items

■ Entering submenus

2-3

2-4

Users may enter the OSD Menu to customize their own Navi Key Hot Keys.

More Hot Key options are as below�

Navi Key Hot Key Options

Brightness

Operations

■ Press Middle Button to save value and exit�

■ Press Up and Down Buttons to adjust�

■ Press Left Button to cancel preview and exit�

Refresh Rate ■ Press Middle Button to confirm selection and exit.

■ Press Right Button to turn on and Left Button to turn off the Refresh Rate.

Information on

Screen

■ Press Middle Button to confirm selection and exit.

■ Press Right Button to turn on and Left Button to turn off this function.

OSD Setup

2-5

2-4

OSD Setup

OSD Setup via Navi Key

Press the Middle button of Navi Key to launch the On-Screen Display (OSD) main menu� Use the Up, Down, Left, Right buttons to tune the desired function menus to suit your personal preferences� h Gaming

1st Level Menu 2nd/3rd Level Menu

Game Mode User

FPS

Racing

RTS

RPG

Night Vision

Response Time

Description

All items can be adjusted by users�

All items can be adjusted by users�

All items can be adjusted by users�

All items can be adjusted by users�

All items can be adjusted by users�

■ Use Up or Down Button to select and preview mode effects.

■ Press the Middle Button to confirm and apply your mode type.

OFF

Normal

■ This function optimizes background brightness and is recommended for FPS games�

Strong

Strongest

A�I�

Normal

Fast

Fastest

Users can adjust Response Time in any

Mode�

This function is recommended for FPS and

Racing games�

■ When Anti Motion Blur is set to ON,

Response Time will be grayed out�

2-5

2-6

1st Level Menu 2nd/3rd Level Menu

Anti Motion Blur

Refresh Rate

Alarm Clock

Screen

Assistance

Adaptive Sync

(OFF)

(ON)

Location Left Top

Right Top

Left Bottom

Right Bottom

Customize

OFF

ON

Location Left Top

Right Top

Left Bottom

Right Bottom

Customize

OFF

15:00

30:00

45:00

60:00

None

00:01~99:59

Icon

Position

Reset

(OFF)

(ON)

Description

■ Brightness cannot be adjusted when Anti

Motion Blur is set to ON�

■ When Screen Refresh Rate is lower than

75HZ, Anti Motion Blur cannot be enabled�

■ This function is recommended for cinema,

FPS and Racing games�

■ Anti Motion Blur and HDCR cannot be enabled simultaneously�

■ Anti Motion Blur and Adaptive Sync cannot be enabled simultaneously�

Users can adjust Refresh Rate in any Mode�

■ Default Refresh Rate Location is Left Top�

Location is adjustable in OSD Menu� Press the Middle Button to confirm and apply your

Refresh Rate Location�

■ This monitor follows and works at the

Operating System’s preset Screen Refresh

Rate�

Users can adjust Alarm Clock in any Mode�

■ After setting the time, press the Middle

Button to activate the timer�

Default Alarm Clock Location is Left Top�

Users can select their own location�

■ Users can adjust Screen Assistance in any

Mode�

■ Screen Assistance default is None�

■ When set to Reset, Icon will be reset to center�

■ While set to Position, the OSD Menu will be closed and only show “Icon” on display for Postion adjustment, until press middle button to exit and the OSD Menu will appear�

■ Default is OFF� Adaptive Sync is a united switch, if HDMI set to OFF, each input source will also set to OFF�

■ Only DisplayPort can enable G-SYNC

Compatible for NVIDIA graphics card�

■ Enabling Adaptive Sync will affect Anti

Motion Blur�

OSD Setup

2-7

2-6

OSD Setup h Professional

1st Level Menu 2nd Level Menu

Pro Mode User

Reader

Cinema

Eye Saver

HDCR

Anti Motion Blur

Image

Enhancement

OFF

Weak

(OFF)

(ON)

Medium

Strong

Strongest

Description

Default mode� All items can be adjusted by users�

All items can be adjusted by users�

All items can be adjusted by users�

Designer All items can be adjusted by users�

■ Use Up or Down Button to select and preview mode effects.

■ Press the Middle Button to confirm and apply your mode type.

(OFF)

(ON)

(OFF)

(ON)

■ Eye Saver protects your eyes against blue light�

When enabled, Eye Saver adjusts the screen color temperature to a more yellow glow�

■ Users can adjust Eye Saver in any Mode�

■ When Pro Mode is set to Reader, it is mandatory to enable Eye Saver�

■ Users can adjust HDCR in any Mode�

■ HDCR enhances image quality by increasing the contrast of images�

■ When HDCR is set to ON, Brightness will be grayed out�

■ HDCR and Anti Motion Blur cannot be enabled simultaneously�

■ Brightness cannot be adjusted when Anti Motion

Blur is set to ON�

■ When Screen Refresh Rate is lower than 75HZ,

Anti Motion Blur cannot be enabled�

■ This function is recommended for cinema, FPS and

Racing games�

■ Anti Motion Blur and HDCR cannot be enabled simultaneously�

■ Anti Motion Blur and Adaptive Sync cannot be enabled simultaneously�

■ Image Enhancement enhances image edges to improve their acutance�

■ Users can adjust Image Enhancement in any

Mode�

2-7

2-8 h Image

1st Level Menu 2nd/3rd Level Menu

Brightness

Contrast

Sharpness

Color

Temperature

0-100

0-100

0-5

Cool

Normal

Warm

Customization R (0-100)

G (0-100)

B (0-100)

Description

■ Users can adjust Brightness in User, RTS,

RPG and Reader mode�

■ Brightness will be grayed out when Anti

Motion Blur and HDCR are enabled�

■ Users can adjust Contrast in any Mode�

■ Users can adjust Sharpness in any Mode�

■ Sharpness improves clarity and details of images�

■ Color Temperature default is Normal�

■ Use Up or Down Button to select and preview mode effects.

■ Press the Middle Button to confirm and apply your mode type�

■ Users can adjust Color Temperature in

Customization mode.

Screen Size Auto

4:3

16:9

21:9

■ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate� h Input Source

1st Level Menu 2nd Level Menu Description

HDMI1 N/A Users can adjust Input Source in any Mode�

HDMI2

DP

Type-c

Auto Scan

(OFF)

(ON)

User can press “Navi Key Button” then select input source at below status:

■ While “Auto Scan” was set to “OFF” and monitor at power saving mode�

■ While “No Signal” message box is shown on monitor� h Navi Key

1st Level Menu 2nd Level Menu

Up OFF

Down

Left

Brightness

Game Mode

Right Screen Assistance

Alarm Clock

Input Source

Refresh Rate

Information On Screen

Description

■ Up Button default is Game Mode�

■ Down Button default is Screen Assistance�

■ Left Button default is Alarm Clock�

■ Right Button default is Input Source�

■ All Navi Key items can be adjusted via OSD

Menu�

OSD Setup

2-9

2-8

OSD Setup h Setting

1st Level Menu 2nd Level Menu Description

Language 繁體中文 ■ Language factory default is English�

English

Français

Deutsch

Italiano

Español

■ Users have to press the Middle Button to confirm and apply the Language setting�

■ Language is an independent setting� Users’ own language setting will override the factory default�

When users set Reset to Yes, Language will not be changed�

한국어

日本語

Русский

Português

简体中文

ไทย

Transparency

OSD Time Out

RGB LED

Bahasa Indonesia

हिन्दी

Türkçe

(More languages coming soon)

0~5

5-30s

(OFF)

Users can adjust Transparency in any Mode�

Users can adjust OSD Time Out in any Mode�

Users can adjust RGB LED to On or Off.

(ON)

Power Button

Information On

Screen

Reset

Type-c Switch

OFF

Standby

YES

NO

2Lane

4Lane

(OFF)

(ON)

When set to OFF, users can press power button to close monitor�

When set to Standby, users can press power button to tune off panel and backlight.

■ The information of the monitor status will be showed on the right side of the screen�

■ Users can enable or disable the Information on

Screen�

■ Default is OFF�

Users can reset and restore settings to original OSD defaulf in any mode�

Select this when connecting to a mobile device (such as a mobile phone) that supports Type C video output�

Default Type-c Switch is 4Lane� Select this when connecting to a PC that supports Type C video output�

2-9

Appendix

IMPORTANT

All information is subject to change without prior notice�

A

A-2

Specifications

Size

Curvature

Panel Type

Resolution

Aspect Ratio

Brightness (nits)

Contrast Ratio

Refresh Rate

Response Time

Input Interface

I/O

View Angles

DCI-P3/ sRGB

Surface Treatment

Display Colors

Power Type

Adapter Spec�

Power Input

Power Output

Adjustment (Tilt)

Adjustment (Height)

Adjustment (Swivel)

Adjustment (Pivot)

Kensington Lock

VESA Mounting

Dimension (W x H x D)

30 inch

1500R

VA

2560 x 1080

21:9

300

3000:1

200Hz

1ms (MPRT)

■ HDMI Port x2

■ DisplayPort x1

■ USB Type-C Port x1

■ HDMI Port x2

■ DisplayPort x1

■ USB 3�2 Gen 1 Type-A Downstream Port x2

■ USB 3�2 Gen 1 Type-B Upstream Port x1

■ USB Type-C Port x1

■ Headphone Jack x1

178°(H) , 178°(V)

98�29%/ 127�39%

Anti-glare

1�07B 10bits (8bits+FRC)

External Power Adapter

Model: ADS-110CL-19-3 190090G

100~240Vac, 50~60Hz, 1.5A

19V, 4�74A

-5° ~ 20°

0 ~ 110mm

-30° ~ 30°

-90° ~ 90°

Yes

■ Plate Type: 75 x 75 mm

■ Screw Type: M4 x10 mm

▶ Thread Diameter: 4 mm

▶ Thread Pitch: 0�7 mm

▶ Thread Length: 10 mm

702�9 x 513�3 x 286�9 mm (max)

Appendix

A-3

A-2

Net Weight

Environment Operating

LED Control

Storage

5�8 kg (net), 9�18 kg (gross)

Temperature: 0°C to 40°C

Humidity: 20% to 90%, non-condensing

Altitude: 0 ~ 2000m

Temperature: -20°C to 60°C

Humidity: 10% to 90%, non-condensing

Mystic light LED support RGB LED

Appendix

A-3

A-4

Preset Display Modes

Standard

VGA

Dos-Mode

SVGA

XGA

SXGA

Resolution

640x480 @60Hz

640x480 @67Hz

640x480 @72Hz

640x480 @75Hz

720x480 @60Hz

720x576 @50Hz

800x600 @56Hz

800x600 @60Hz

800x600 @72Hz

800x600 @75Hz

1024x768 @60Hz

1024x768 @70Hz

1024x768 @75Hz

1280x1024 @60Hz

1280x1024 @75Hz

WXGA+

WSXGA+

Full HD

1440x900 @60Hz

1680x1050 @60Hz

1920x1080 @60Hz

1920x1080 @120Hz

2560x1080 @60Hz WFHD

2560x1080 @120Hz

2560x1080 @144Hz

2560x1080 @180Hz

2560x1080 @200Hz

Video Timing Resolution 480P

576P

720P

1080i

1080P

1080P @120Hz

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

HDMI 2

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

HDMI 1

V

V

V

V

V

V

V

V

V

V

V

V

DP

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

V

Type C

V

V

Appendix

A-5

A-4

Appendix

Troubleshooting

The power LED is off.

■ Press the monitor power button again�

■ Check if the monitor power cable is properly connected�

No image�

■ Check if the computer graphics card is properly installed�

■ Check if the computer and monitor are connected to electrical outlets and are turned on�

■ Check if the monitor signal cable is properly connected�

■ The computer may be in Standby mode� Press any key to activate the monitor�

The screen image is not properly sized or centered�

Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display�

No Plug & Play�

■ Check if the monitor power cable is properly connected�

■ Check if the monitor signal cable is properly connected�

■ Check if the computer and graphics card are Plug & Play compatible�

The icons, font or screen are fuzzy, blurry or have color problems�

■ Avoid using any video extension cables�

■ Adjust brightness and contrast�

■ Check if the monitor signal cable is properly connected�

Adjust RGB color or tune color temperature�

Check for bent pins on the signal cable connector�

The monitor starts flickering or shows waves.

■ Change the refresh rate to match the capabilities of your monitor�

■ Update your graphics card drivers�

■ Keep the monitor away from electrical devices that may cause electromagnetic interference (EMI)�

A-5

advertisement

Key Features

  • 74.9cm (29.5") WFHD 2560 x 1080 VA
  • 1ms, 21:9, 300cd/m², 3000:1
  • USB, HDMI, DisplayPort

Related manuals

Frequently Answers and Questions

What is the screen size and curvature of the MSI Optix MAG301CR2?
The MSI Optix MAG301CR2 features a 30-inch VA panel with a 1500R curvature.
What is the refresh rate and response time of the monitor?
The MSI Optix MAG301CR2 has a 200Hz refresh rate and a 1ms response time.
Does the monitor support AMD FreeSync Premium technology?
Yes, the MSI Optix MAG301CR2 supports AMD FreeSync Premium technology.
What are the connectivity options available on the monitor?
The MSI Optix MAG301CR2 offers multiple connectivity options, including HDMI, DisplayPort, and USB-C.
Can the monitor be mounted on a wall or monitor arm?
Yes, the MSI Optix MAG301CR2 is VESA mount compatible, allowing for flexible placement options.