advertisement
Connecting to your TV
Please connect this unit and the TV using the optical digital cable or HDMI cable considering the capability of the TV.
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Connecting 15
Using an HDMI cable
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Please refer to your TV user manual when you check HDMI CEC/ARC function of your TV.
2
HDMI cable
Optical cable
2. Select the input source to OPTICAL by pressing
F
button repeatedly.
,
Note
y
Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
y
You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
y
Set up the sound output of TV to listen to the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound output]
[
[External speaker (Optical)]
y
Details of TV setting menu vary depending on the manufacturers or models of your TV.
,
Note
y
HDMI CEC (Consumer Electronics Control):
Using a single remote control, you have the ability to operate CEC compatible devices (TV,
Sound Bar, Blue-ray player, etc.)
y
You can also enjoy extra functions such as
USB /
Bluetooth
pressing
F
button on the remote or unit. When you go back to live TV channel after using the extra functions (USB
/
Bluetooth
) of this audio system, you should choose your preferred speaker on TV to enjoy the sound from this audio system again.
2
16
Connecting
HDMI cable Checklist
Some HDMI cables do not support the ARC function, this can result in no sound output.
When connecting this unit to the TV, if there is no sound, there might be a problem with the HDMI cable. Therefore connect this unit to the TV and check whether the Type A, High speed HDMI™ Cable with Ethernet.
STANDARD HDMI CABLE WITH ETHERNET
HIGH SPEED HDMI CABLE
(X)
(X)
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
Enjoy rich sound broadcast of the channel with the sound bar
Connection through HDMI Cable
Your television must support the newest HDMI features (HDMI CEC
1)
/ ARC (Audio Return Channel)) to fully enjoy the Live broadcasting channel with audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system should be connected through an OPTICAL cable.
1) HDMI CEC (High-Definition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control the CEC-enabled devices, that are connected through HDMI by using only one of their remote controls.
※
Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync/ Link (Sony), EasyLink
(Philips), EZ-Sync/ VIERA Link (Panasonic), etc..
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control :
Power on/off, volume up/down, mute, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
,
Note
y
Depending on the state of the unit, some
SIMPLINK operation may differ from your purpose or not work.
y
Depending on a TV or a player which is connected with this unit, SIMPLINK operation may differ from your purpose.
Connecting 17
ARC (Audio Return Channel) function
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit.
To use this function :
Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual.
You must use the HDMI cable (Type A, High Speed
HDMI™ cable with Ethernet).
You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports ARC function using an HDMI cable.
You can connect only one Sound bar to TV compatible with ARC.
,
Note
y
ARC function is automatically selected when
ARC signal comes in from TV, no matter what kind of the function you are using.
y
You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
y
Set up the sound output of TV to listen to the sound through this unit :
TV setting menu
[
[Sound]
[
[TV Sound output]
[
[External speaker (HDMI ARC)]
y
Details of TV setting menu vary depending on the manufacturers or models of your TV.
y
If you change to other function while you are using ARC function, you need to adjust
ARC setting on TV setting again to use ARC function.
Additional information for HDMI
y
When you connect an HDMI or DVI compatible device make sure of the following:
- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p, 1920 x
1080i or 1920 x 1080p video input.
y
Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
,
Note
y
If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
y
Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
y
When the HDMI connection with HDCP is not verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or disconnect the HDMI cable.
y
If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m (15 ft).
y
You cannot change the video resolution in the
HDMI IN mode. Change the video resolution of the connected component.
y
If the video output signal is abnormal when your personal computer is connected to HDMI
IN jack, change the resolution of your personal computer to 576p (or 480p), 720p, 1080i or
1080p.
2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement
Table of contents
- 3 Safety Information
- 6 Unique features
- 6 Introduction
- 6 Symbols used in this manual
- 6 Accessories
- 7 Remote control
- 8 Front panel
- 8 Rear panel
- 9 About LED condition
- 10 Installing the sound bar
- 11 Mounting the main unit on a wall
- 13 Connecting the AC Adapter
- 13 Wireless subwoofer connection
- 15 Connecting to your TV
- 15 Using an OPTICAL cable
- 15 Using an HDMI cable
- 16 Enjoy rich sound broadcast of the channel with the sound bar
- 17 ARC (Audio Return Channel) function
- 17 Additional information for HDMI
- 18 Optional equipment connection
- 18 HDMI connection
- 19 Optical In connection
- 19 Portable In connection
- 20 USB connection
- 20 Compatible USB devices
- 20 USB device requirement
- 21 Playable file
- 22 Basic operations
- 22 USB operation
- 22 Other operations
- 22 Turn off the sound temporarily
- 22 Auto LED Off
- 23 Using your TV remote control
- 24 AUTO POWER On/Off
- 25 Auto function change
- 25 LG Sound Sync
- 27 Using BLUETOOTH® technology
- 27 Listening to music stored on the Bluetooth devices
- 29 Using BLUETOOTH App
- 29 Install “Music Flow Bluetooth” App onto Your BLUETOOTH Device
- 29 Activate BLUETOOTH with “Music Flow Bluetooth” App
- 30 Sound adjustment
- 30 Setting sound effect
- 31 Adjust the woofer level settings
- 31 Night mode
- 32 Troubleshooting
- 33 NOTES to use wireless
- 34 Trademarks and licenses
- 35 Specifications
- 37 Maintenance
- 37 Handling the unit