Setting the temperature. Miele FN 35402 i, FNS 37402 i, FNS 35402 i, FN 37402 i

Add to My manuals
84 Pages

advertisement

Setting the temperature. Miele FN 35402 i, FNS 37402 i, FNS 35402 i, FN 37402 i | Manualzz

The correct temperature

Setting the temperature

^

Use the two sensors underneath the display to set the temperature.

By touching the sensor

Approximately 5 seconds after the last time a sensor has been touched, the current temperature inside the appliance is automatically shown.

– the temperature will get colder

– the temperature will get warmer.

The temperature being set will flash in the display.

The following information shows in the display while the sensors are being touched:

– Touching a sensor once: the last temperature selected flashes.

– Each subsequent touch of the sensor: adjusts the temperature shown in

1 °C steps.

– Leaving a finger on the sensor: changes the temperature continuously.

If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display, as it will take this long for the appliance to give an accurate reading.

If, after this time, the temperature is still too high or too low, you will need to adjust it again.

Temperature range

The temperature can be adjusted from

-15 °C to -28 °C.

22

Using Super freeze

Switch on Super freeze before putting fresh food into the freezer.

This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance.

Super freeze is not necessary:

– when placing food in the freezer that is already frozen.

– when freezing up to 2 kg fresh food daily.

Switching off Super freeze

The Super freeze function will switch itself off automatically after approx. 65 hours. The quantity of fresh food placed in the freezer will determine the duration before the Super freeze function switched off. The Super freeze

ª symbol will go out and the appliance will run at normal power again.

To save energy, the Super freeze function can be switched off once a constant temperature of -18 °C is reached inside the freezer. Check the temperature inside the appliance.

Switching on Super freeze

When freezing small quantities of food in the freezer, the Super freeze function should be switched on 6 hours beforehand . When freezing the maximum load of food , the Super freeze function should be switched on

24 hours beforehand .

^

Touch the Super freeze sensor so that it is no longer highlighted in yellow.

The appliance will continue running at normal power.

^

Touch the Super freeze sensor so that it is highlighted in yellow.

The appliance will work at full power to lower the temperature in the appliance.

23

advertisement

Key Features

  • No icing up of food and no need to defrost thanks to Frost free
  • Optimum and maintenance-free LED lighting in compartment
  • Soft-closing doors thanks to SoftClose
  • Freezer compartment can be increased in size with-VarioRoom
  • Rapid and gentle freezing of food - Super freeze

Related manuals