Door alarm. Miele FN 35402 i, FNS 37402 i, FNS 35402 i, FN 37402 i

Add to My manuals
84 Pages

advertisement

Door alarm. Miele FN 35402 i, FNS 37402 i, FNS 35402 i, FN 37402 i | Manualzz

Temperature and door alarm

Door alarm

The alarm will sound if the door is left open for a long time. The alarm symbol

; will light up.

The period of time before the door alarm sounds is 2 minutes (default setting) or 4 minutes depending on the setting selected. The door alarm can also be switched off (see "Selecting further settings - Acoustic signals").

The alarm will stop and the alarm symbol

; will go out as soon as the door is closed.

If the audible tone does not sound in the case of a door alarm, the alarm tone has been switched off in settings mode (see "Selecting further settings - Acoustic signals").

Switching the alarm off early

If the noise disturbs you, you can switch the alarm off early if you wish.

^ Touch the sensor for switching off the door alarm.

The alarm will stop.

The alarm symbol ; will continue to be lit up until the door is closed.

25

Selecting further settings

Certain settings on the appliance can only be selected in settings mode.

When in settings mode, the door alarm and other fault messages are automatically deactivated although the alarm symbol

; appears in the display.

Available settings

0 Activating or deactivating the safety lock

)

Switching acoustic signals on/off s

Altering the display brightness

¬

Switching Sabbath mode on/off

These settings are described in more detail below.

Safety lock

0

The safety lock can be activated to prevent:

– the appliance being switched off by mistake,

– the temperature being changed by mistake,

– the Super freeze function being selected by mistake,

– settings being adjusted by mistake (it is only possible to deactivate the lock).

This prevents the appliance being switched off or settings adjusted without your knowledge, by children, for example.

Activating or deactivating the lock

^ Touch the settings sensor.

All symbols available for selection will appear in the display and the 0 symbol flashes.

^

Touch the OK sensor to confirm your selection.

The last selected setting flashes and the

0 symbol lights up in the display.

26

^ By touching the X or Y sensor, you can now select whether the safety lock is activated or deactivated:

0 : the safety lock is deactivated

1 : the safety lock is activated

^

Touch the OK sensor to confirm your selection.

The selected setting is applied, the

0 symbol flashes.

^

Touch the settings sensor to leave settings mode.

Otherwise the appliance exits settings mode automatically after approximately one minute.

The 0 symbol will appear in the display when the lock is activated.

Selecting further settings

27

Selecting further settings

Acoustic signals

)

The appliance has acoustic signals such as the sensor tone and the door and temperature alarms.

You can switch the sensor tone or the door alarm tone on or off but you cannot deactivate the temperature alarm.

There are four settings to choose from.

Option 3 is set the factory, i.e. the sensor tone and the door alarm are switched on.

Switching acoustic signals on/off

^ By touching the X or Y sensor you can now select:

0

: sensor tone off; door alarm off

1

: sensor tone off; door alarm on

(after 4 minutes)

2 : sensor tone off; door alarm on

(after 2 minutes)

3

: sensor tone on; door alarm on

(after 2 minutes)

^

Touch the settings sensor.

All symbols available for selection will appear in the display and the 0 symbol flashes.

^ Touch the OK sensor to confirm your selection.

The selected setting is applied, the ) symbol flashes.

^ Touch the sensors for setting the temperature (

X or

Y

) repeatedly until the

) symbol flashes.

^

Touch the settings sensor to leave settings mode.

Otherwise the appliance exits settings mode automatically after approximately one minute.

^ Touch the OK sensor to confirm your selection.

The last selected setting flashes and the ) symbol lights up in the display.

28

Selecting further settings

Display brightness s

The display brightness can be adjusted to suit the lighting conditions of the room.

The display brightness can be altered in stages from

1 to

3

. The default setting is is the maximum brightness, option 3 .

Altering the display brightness

^

By touching the

X or

Y sensor you can now alter the brightness of the display:

1

: dimmest setting

2

: medium setting

3 : brightest setting.

^

Touch the settings sensor.

All symbols available for selection will appear in the display and the 0 symbol flashes.

^ Touch the OK sensor to confirm your selection.

The selected setting is applied, the s symbol flashes.

^

Touch the sensors for setting the temperature ( X or Y ) repeatedly until the s symbol flashes.

^

Touch the settings sensor to leave settings mode.

Otherwise the appliance exits settings mode automatically after approximately one minute.

^

Touch the OK sensor to confirm your selection.

The last selected setting flashes and the s symbol lights up in the display.

29

Selecting further settings

Sabbath mode

¬

The appliance offers a Sabbath programme for the purposes of religious observance.

The following are switched off:

– the interior lighting when the door is opened,

– all acoustic and optical signals,

– the temperature display,

– the Super freeze function (if previously selected),

The following can be selected:

– the settings sensor for switching off

Sabbath mode

– and the On/Off button.

Switching on Sabbath mode

^ Touch the settings sensor.

All symbols available for selection will appear in the display and the 0 symbol flashes.

^ Touch the sensors for setting the temperature (

X or

Y

) repeatedly until the

¬ symbol flashes.

Temperature regulation is limited in

Sabbath mode.

Ensure that the doors are properly closed, as optical and acoustic alarms are switched off.

Any power failure during this time is not shown in the display. After a power failure, the appliance restarts in Sabbath mode.

^

Touch the OK sensor to confirm your selection.

The last selected setting flashes and the

¬ symbol lights up in the display.

^ By touching the X or Y sensor you can now switch on Sabbath mode. To do this, select setting

1

.

30

^ Touch the OK sensor to confirm your selection.

The selected setting is applied, the ¬ symbol lights up.

As soon as the

¬ symbol goes out in the display, Sabbath mode is switched on.

^

Switch off Sabbath mode after the

Sabbath has passed.

Switching off Sabbath mode

^ Touch the settings sensor to leave

Sabbath mode.

The temperature will appear in the display and the interior lighting will come on.

Selecting further settings

31

advertisement

Key Features

  • No icing up of food and no need to defrost thanks to Frost free
  • Optimum and maintenance-free LED lighting in compartment
  • Soft-closing doors thanks to SoftClose
  • Freezer compartment can be increased in size with-VarioRoom
  • Rapid and gentle freezing of food - Super freeze

Related manuals