Using the remote control. Epson PowerLite 740c, PowerLite 732c, 732c
Epson PowerLite 732c offers a range of capabilities to enhance your presentations. Its user-friendly design lets you connect your notebook easily using the included cables. The projector delivers sharp and vivid images with its focus and zoom adjustment features, ensuring optimal viewing. You can control the projector and navigate menus using the remote control. Additionally, you can optimize the computer image through the display settings on your laptop or computer.
Advertisement
Advertisement
Quick Setup
Epson PowerLite 732c/740c
U
sing the remote control
1
If this is your first time using the remote, make sure its batteries are installed as shown.
Turn off projector display and sound
Choose which source to display
Optimize the computer image
Turn projector on and off
Zoom in on part of the projected image
Navigate projector menus
Control projector volume
You can use the remote control to control the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your User’s Guide .
W
here to get help
Telephone Support Services
To use the Epson PrivateLine ® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included in your Start Here kit. This service is available 6 AM to 6 PM , Pacific Time, Monday through
Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:
U.S.
: (562) 276-4394, 6 AM to 6 PM , Pacific Time,
Monday through Friday
Canada : (905) 709-3839, 6 AM to 6 PM , Pacific Time,
Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services
Epson provides technical assistance through electronic support services 24 hours a day at http://support.epson.com. For tips, templates, and training for developing successful presentations go to http://www.presentersonline.com.
Don’t forget to register!
Fill out the registration card included in your Start Here kit and mail it to Epson. Or register online at www.epson.com /webreg.
T
roubleshooting
If you see a blank screen...
If you see a blank screen or the No signal message after turning on your notebook, check the following:
Make sure the Power light on the projector is green and not flashing, and the lens cover is off.
Press the Source Search button on the projector to select the computer as the image source.
If you’re using a Windows ® notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it. Allow a few seconds for the projector to sync up after changing the setting.
If the projector and notebook don’t display the same image...
If your image displays either on the projector or notebook, but not on both, check the following:
Windows
Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.
If that doesn’t work, check your monitor settings to make sure both the
LCD screen and the external monitor port are enabled.
1 .
From the Windows Control Panel, open the Display utility.
2 .
In the Display Properties dialog box, click the
Settings tab, then click Advanced .
3 .
The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
See your notebook’s manual or online help for details.
Macintosh ® OS X
1 .
From the Apple ® menu, select System
Preferences , then select Displays .
2 .
Select the VGA Display or Color LCD dialog box.
3 .
Click the Arrangement (or Arrange ) tab and click Mirror Displays .
Macintosh OS 9.x or earlier
1 .
From the Apple menu, select Control
Panels , then click Monitors or
Monitors and Sound .
2 .
Click the Arrange icon.
3 .
Drag one monitor icon on top of the other.
If the Arrange option isn’t available, click the
Monitor icon and select a Simulscan resolution.
Epson is a registered trademark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks. © 2005 Epson America, Inc. 1/05
Printed in XXXXXXXXX
CPD-19397

Public link updated
The public link to your chat has been updated.
Advertisement