PREFACE. Fujitsu MPE3XXXAT

Add to My manuals
191 Pages

advertisement

PREFACE. Fujitsu MPE3XXXAT | Manualzz

PREFACE

This manual describes the MPE3xxxAT series, a 3.5-inch hard disk drive with a BUILT-IN controller that is compatible with the ATA interface.

This manual explains, in detail, how to incorporate the hard disk drives into user systems.

This manual assumes that users have a basic knowledge of hard disk drives and their application in computer systems.

This manual consists of the following six chapters:

Chapter 1 DEVICE OVERVIEW

Chapter 2

Chapter 3

Chapter 4

Chapter 5

DEVICE CONFIGURATION

INSTALLATION CONDITIONS

THEORY OF DEVICE OPERATION

INTERFACE

Chapter 6 OPERATIONS

In this manual, disk drives may be referred to as drives or devices.

C141-E077-01EN iii

Conventions for Alert Messages

This manual uses the following conventions to show the alert messages. An alert message consists of an alert signal and alert statements. The alert signal consists of an alert symbol and a signal word or just a signal word.

The following are the alert signals and their meanings:

This indicates a hazarous situation likely to result in serious personal injury if the user does not perform the procedure correctly.

This indicates a hazarous situation could result in personal injury if the user does not perform the porocedure correctly.

This indicates a hazarous situation could result in minor or moderate personal injury if the user does not perform the procedure correctly.

This alert signal also indicates that damages to the product or other property, may occur if the user does not perform the procedure correctly.

This indicates information that could help the user use the product more efficiently.

In the text, the alert signal is centered, followed below by the indented message. A wider line space precedes and follows the alert message to show where the alert message begins and ends. The following is an example:

(Example)

IMPORTANT

HA (host adapter) consists of address decoder, driver, and receiver.

ATA is an abbreviation of "AT attachment". The disk drive is conformed to the ATA-4 interface

The main alert messages in the text are also listed in the “Important Alert Items.” iv C141-E077-01EN

LIABILITY EXCEPTION

"Disk drive defects" refers to defects that involve adjustment, repair, or replacement.

Fujitsu is not liable for any other disk drive defects, such as those caused by user misoperation or mishandling, inappropriate operating environments, defects in the power supply or cable, problems of the host system, or other causes outside the disk drive.

C141-E077-01EN v

MANUAL ORGANIZATION

MPE3xxxAT

DISK DRIVES

PRODUCT

MANUAL

(C141-E077)

<This manual>

MPE3xxxAT

DISK DRIVES

MAINTENANCE

MANUAL

(C141-F036)

• DEVICE OVERVIEW

• DEVICE CONFIGURATION

• INSTALLATION CONDITIONS

• THEORY OF DEVICE OPERATION

• INTERFACE

• OPERATIONS

• MAINTENANCE AND DIAGNOSIS

• REMOVAL AND REPLACEMENT PROCEDURE vi C141-E077-01EN

advertisement

Related manuals

advertisement

Table of contents