Contents. Netgear WN802T 68 Pages
advertisement
▼
Scroll to page 2
of
68
Contents
Installation and Configuration
vii v2.0, May 2006
Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2-PSK .................................3-7
I cannot access the Internet or the LAN with a wireless capable computer. .................5-2
Default Settings and Technical Specifications
viii v2.0, May 2006
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 1 NETGEAR RangeMax NEXT Wireless Access Point WN802T Reference Manual
- 7 Contents
- 9 About This Manual
- 9 Conventions, Formats and Scope
- 10 How to Use This Manual
- 10 How to Print this Manual
- 13 Chapter 1 Introduction
- 13 About the RangeMax NEXT Wireless Access Point
- 13 Key Features
- 14 System Requirements
- 14 What’s in the Box
- 15 Front Panel of the RangeMax NEXT
- 16 Back Panel of the RangeMax NEXT
- 17 RangeMax NEXT Default Settings Location
- 19 Chapter 2 Installation and Configuration
- 19 Wireless Equipment Placement and Range Guidelines
- 20 Installing the RangeMax NEXT
- 20 System Requirements
- 21 Setting up the RangeMax NEXT
- 21 Configuring Basic LAN and Wireless Access
- 25 Deploying the RangeMax NEXT
- 25 Verifying Wireless Connectivity
- 26 Configuring LAN IP and Wireless Settings
- 26 Logging in to the RangeMax NEXT
- 27 Setting LAN IP Options
- 28 Configuring Wireless Settings
- 30 Setting Up and Testing Basic Wireless Connectivity
- 33 Chapter 3 Wireless Security Settings
- 33 Understanding WN802T Wireless Security Options
- 34 WEP/WPA Settings
- 36 SSID and WEP/WPA Settings Setup Form
- 37 Configuring WEP
- 39 Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2- PSK
- 40 Restricting Wireless Access by MAC Address
- 43 Chapter 4 Management
- 47 Rebooting the RangeMax NEXT
- 48 Viewing Statistics
- 49 Advanced Wireless Settings
- 51 Chapter 5 Troubleshooting
- 51 No lights are lit on the access point.
- 51 The Ethernet light is not lit.
- 51 The WLAN light is not lit.
- 52 I cannot configure the access point from a browser.
- 52 I cannot access the Internet or the LAN with a wireless capable computer.
- 53 When I enter a URL or IP address I get a timeout error.
- 53 Using the Reset Button to Restore Factory Default Settings
- 55 Appendix A Default Settings and Technical Specifications
- 55 Factory Default Settings
- 57 Technical Specifications
- 59 Appendix B Related Documents
- 61 Index