SETTING THE TIMER. Panasonic CU-3KE19NBU, CS-MKE7NKU, CU-4KE24NBU, CS-MKE9NKU, CS-MKE12NKU, CU-4KE31NBU

SETTING THE TIMER

NOTE In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote controller.

• Temperature: °F

• Time: AM, PM

1. How to set the present time

(Example) To set to 10:30 pm.

Operation

1.

Press the CLOCK button once if the time indicator is not flashing.

2.

Press the Advance, Return ( ,

) button until PM 10:30 is displayed.

3.

Press the CLOCK button again.

Indication

The time indication alone flashes.

The time can be set in 1-minute increments. Holding down the button advances the time rapidly in 10-minute increments.

This completes the setting of the current time.

2. How to set the OFF time (Example) To stop the air conditioner at 11:00 am.

1.

Press the OFF TIME setting button once.

2.

Press the Advance, Return ( ,

) button until AM 11:00 is displayed.

Operation

3.

Wait a few seconds, and then the setting is complete.

Indication

The timer indication is displayed, and the present OFF time is shown.

The timer indication blinks.

The time can be set in 10-minute increments. Holding down the button advances the time rapidly in 10-minute increments.

The timer indication stops blinking and the present time is displayed.

18

SETTING THE TIMER (CONTINUED)

(Example) To start operation at 7:10 am.

3. How to set the ON time

Operation

1.

Press the ON TIME setting button once.

2.

Press the Advance, Return ( ,

) button until AM 7:10 is displayed.

3.

Wait a few seconds, and then the setting is complete.

Indication

The timer indication is displayed, and the present ON time is shown.

The timer indication blinks.

The time can be set in 10-minute increments. Holding down the button advances the time rapidly in

10-minute increments.

The timer indication stops blinking and the present time is displayed.

4. How to set DAILY ON/OFF

REPEAT timer

(Example) To start operation at 7:10 am. and stop the air conditioner at 11:00 am.

10:30 pm.

Present time

7:10 am.

ON

11:00 am.

OFF

Operation

1.

Set the timer ON/OFF times as shown in 2-1, 2, 3 and 3-1, 2, 3.

Indication

The present time 10:30 pm. and

are displayed.

NOTE • The ON/OFF combination timer uses the current time as the reference, and it is activated starting from whichever set time comes first.

• With the ON/OFF combination timer, the settings are repeated every day.

• You can check the timer ON/OFF times after you have set them by pressing the ON TIME and OFF TIME setting buttons.

To cancel a timer program • Press the CANCEL button.

• When either an ON or OFF timer is to be canceled, press the button corresponding to the timer whose program is to be canceled, and then press the CANCEL button.

NOTE

• The airflow direction, fan speed and temperature setting can be changed after a timer program has been set even when the unit is stopped. Even when operation is stopped during an ON timer program, the unit will start operating when the set time is reached provided that the program is not canceled.

• When the ON timer and OFF timer are set to the same time, the timer operates as if it is turned off.

19