B’s Recorder / B’s CLiP. Panasonic CF-VDR732U

Add to My manuals
80 Pages

advertisement

B’s Recorder / B’s CLiP. Panasonic CF-VDR732U | Manualzz

B’s Recorder / B’s CLiP

E

“B’s Recorder,” and “B’s CLiP” are CD recording software applications developed by B.H.A

Corporation.

Here, explanations are given on general information about B’s Recorder and B’s CLiP, the installation procedure, and how to access the online manual. Refer to the online manual concerning the detailed use of the software application ( page 17 ) .

Applicable Media

CD-R* 1 (one-time recordable CD media)

CD-RW (writable/rewritable or erasable CD media)

* 1 Applicable only for B’s Recorder. Cannot read from or write to CD-R disc using B’s CLiP.

About Copies

When writing to discs, make sure that you are not infringing any copyrights.

It is illegal to copy audio CDs for non-personal use.

When backing up software, make sure that you are not infringing any software copyrights for that product.

Before Installing B’s Recorder / B’s CLiP

Insert the drive into the multimedia pocket. (

Windows XP

“Multimedia Pocket”)

Right-click [(x:)]* 2 in [start] - [My Computer], select [Properties] - [Recording], then delete the check mark for [Enable CD recording on this drive].

(Delete the check mark for [Enable CD recording on this drive] every time a new user is added.)

* 2 “x” is the drive letter. You can change the letter to suit your preference.

Windows 2000

Select [Start] - [Settings] - [Control Panel] - [Add/Remove Programs] to check which version of Windows Media Player is provided on your computer, and then follow the steps below to uninstall Adaptec CD-Burning Plug-in.

<When Windows Media Player 7 is installed>

1 Select [Windows Media Player 7] - [Change/Remove] in [Add/Remove Programs].

2 Select [Remove Windows Media components] and select [Next].

3 Select [Adaptec CD-Burning Plug-in] from the components list, and select [Next].

4 If the message “Windows Media setup is now ready to uninstall” appears, select [Next].

5 Select [Finish] and restart the computer.

<When Windows Media Player 9 is installed>

1 Select [Start] - [Run], input

[rundll32 advpack.dll,LaunchINFSection C* 3 :\winnt\inf\roxio.inf,uninstall], and select [OK].

2 At [Advanced INF Install] screen, select [OK].

* 3 C:\winnt denotes the folder where Windows is installed. A different letter may be input for the drive instead of C depending on which letters are assigned to which drives for use.

14

CAUTION

Do not install the software using a drive other than this drive. Be sure to insert this drive into your computer, and then insert the disc for installation.

Close all other software application before running the Setup program for

B’s Recorder and B’s CLiP for added safety.

Log on to Windows with the administrator authority.

Do not lose the serial number marked on the sticker on the packaging of the CD case.

NOTE

Depending on the computer, preparatory steps may be necessary before installation.

Before installing the application, be sure to read the Operating Instructions or Reference Manual of the computer.

E

Installing B’s Recorder / B’s CLiP

1 Set “DVD Drive Utility Disc” in the drive.

Windows XP

[Utility Setup tool] screen will appear (allow some time for disc recognition).

When the setup program will not run automatically, input [x:\setuputil.exe]* 4 in [start] -

[Run] and select [OK].

Windows 2000

At the message, select [OK]. (Check again that the steps in “Before Installing B's Recorder / B's CLiP”

(

page 14

)

have been performed.) [Utility Setup tool] screen will appear (allow some time for disc recognition).

When the setup program will not run automatically, input [x:\setuputil.exe]* 4 in [Start] -

[Run] and select [OK]. At the message, select [OK].

2 Select [B’s Recorder Gold/B’s CLiP Setup].

3 Select [B’s Recorder GOLD BASIC] and follow the on-screen instructions.

During the course of the installation process, you will be asked to input a serial number. Input the serial number marked on the sticker on the packaging of the CD case or on the disc itself.

4 Upon completion of the installation, select [Yes, I want to restart my computer now], then select [Finish]. The computer will restart automatically.

5 Windows XP

Input [x:\setuputil.exe]* 4 in [start] - [Run] and select [OK].

[Utility Setup tool] screen will appear.

Windows 2000

Input [x:\setuputil.exe]* 4 in [Start] - [Run] and select [OK]. At the message, select [OK].

[Utility Setup tool] screen will appear.

* 4 “x” is the drive letter. You can change the letter to suit your preference.

15

B’s Recorder / B’s CLiP

E

6 Select [B’s Recorder Gold/B’s CLiP Setup].

7 Select [B’s CLiP6] and follow the on-screen instructions.

During the course of the installation process, you will be asked to input a serial number.

Input the serial number marked on the sticker on the packaging of the CD case or on the disc itself.

8 Upon completion of the installation, select [Yes, I want to restart my computer now], then select [Finish]. The computer will restart automatically.

Running B’s Recorder / B’s CLiP

B’s Recorder

You can run B’s Recorder using either of the following procedures.

Double-click on the desktop.

Windows XP

Select [start] - [All Programs] - [B.H.A] - [B’s Recorder GOLD BASIC] - [B’s

Recorder GOLD BASIC].

Windows 2000

Select [Start] - [Programs] - [B.H.A] - [B’s Recorder GOLD BASIC] - [B’s Recorder GOLD BASIC].

B’s CLiP

B’s CLiP runs when the computer starts up, and or is displayed on the taskbar.

Usage Precautions

B’s Recorder

• Be sure to shut down B’s Recorder before logging off Windows.

B’s Recorder may fail to start up properly. If this occurs, restart the computer.

B’s CLiP

• Cannot read from or write to CD-R disc using B's CLiP. Only CD-RW is available.

• Do not use the Fast User Switching function.

If this function is used, or will no longer be shown on the taskbar after the switching is complete, and B’s CLiP cannot be used. If this happens, log off all users, and then log on to Windows with the user you want to use.

• Do not remove the media immediately after reading or writing, even after the Windows copying message has disappeared.

• When is displayed on the taskbar, the computer cannot enter standby of hibernation mode.

16

How to access the Online Manual

B’s Recorder

Windows XP

Select [start] - [All Programs] - [B.H.A] - [B’s Recorder GOLD BASIC] - [DOC] - [User’s Manual].

Windows 2000

Select [Start] - [Programs] - [B.H.A] - [B’s Recorder GOLD BASIC] - [DOC] - [User’s Manual].

B’s CLiP

Windows XP

Select [start] - [All Programs] - [B.H.A] - [B’s CLiP] - [User’s Manual].

Windows 2000

Select [Start] - [Programs] - [B.H.A] - [B’s CLiP] - [User’s Manual].

Notes During Use

Disc cover opens automatically

• When B’s Recorder is finished writing, the disc cover opens automatically. You can change the settings for B's Recorder so that the disc cover does not open automatically. If you select

[OK] after writing, however, the disk cover will open regardless of the settings.

To format disc using B’s CLiP

• Right-click or and then select [Format].

Discs formatted or written using methods other than B’s CLiP cannot be used.

• After formatting the disc, if the disk does not mount (is not recognized), remove it, and insert it again.

• Eject the formatted disks as described below.

When ejecting the disc while is displayed on the taskbar

• Right-click and select [Eject].

Only eject discs as described above.

• If you cannot eject the disc even after attempting the operation described above, shut down Windows and after the power is off, insert a pointed object (e.g., the bent-out tip of a paper clip, or the tip of a ballpoint pen) into the emergency hole and pull out the tray.

To disable B’s CLiP when it is not used

• Make the settings following the steps below.

1 Log on to Windows with the administrator authority.

2 Windows XP

Select [start] - [All Programs] - [B.H.A] - [B’s CLiP] - [B’s Config].

Windows 2000

Select [Start] - [Programs] - [B.H.A] - [B’s CLiP] - [B’s Config].

3 Add a check mark for [Disable B’s CLiP] at [System Configuration], and select [OK].

4 When a message appears asking if you want to restart your computer, select [Yes].

To start using B’s CLiP again, remove the check mark from [Disable B’s CLiP] using step 3 described above, and select [OK].

If “B’s Recorder” or “B’s CLiP” has been deleted, reinstall it. ( page 15)

17

E

B’s Recorder / B’s CLiP

E

SUPPORT INFORMATION

About User Registration

Follow the steps below for user registration.

1 While connected to the Internet, start up B’s Recorder.

2 Select [Help] - [Related Websites] - [User Registration] and follow the on-screen instructions.

If B’s Recorder and B’s CLiP do not operate properly, we recommend carefully reading the online help file first for problems with the operating environment or operations. If you still cannot troubleshoot the problem, contact B.H.A.

URL: http://www.bhacorp.com/ e-mail: U.S./Canada (English) : [email protected]

Other countries (English, German, French, Italian, Spanish) : [email protected]

18

advertisement

Related manuals