Troubleshooting. Panasonic CF-VDR732U

Add to My manuals
80 Pages

advertisement

Troubleshooting. Panasonic CF-VDR732U | Manualzz

Troubleshooting

The computer does not recognize the drive

The Multimedia pocket device status indicator does not light

Cannot play disc or read data from it

“B’s Recorder” and “B’s CLiP” do not work properly

Cannot eject disc

Check the settings by following the instructions in

“Preparations” ( page 7).

Is the drive properly mounted in the multimedia pocket?

Restart the computer.

Is the disc loaded on the tray correctly?

( page 8)

Is the disc bent, scratched, or dirty?

An error may occur if, after the tray has been closed or operation has been resumed from the standby/ hibernation modes, the drive is accessed before the

Multimedia Pocket device status indicator goes off. Also, an error may occur if the drive is accessed by the application software automatically.

In a case like this, remove the disc, re-insert it, and try again.

Is writing software other than “B’s Recorder” or

“B’s CLiP” installed?

Uninstall the writing software other than “B's Recorder” or “B’s CLiP.”

Is the computer powered on?

To remove a disc when the computer is powered off, insert a sharp object such as the bent-out tip of a paper clip into the emergency hole. Pushing it completely to the end will free the tray so that it can be pulled out.

E

The disc tray does not close

Emergency Hole

When using a software such as B’s CLiP that controls the disc removal, remove the disc while referring to the software’s operating instructions.

Did you touch the eject button when you close the tray?

19

advertisement

Related manuals