GRAB RAIL. Honda CBR125R

The Honda CBR125R is a lightweight and powerful motorcycle designed for both beginners and experienced riders. It features a liquid-cooled, single-cylinder engine with PGM-FI fuel injection, delivering reliable performance. The CBR125R also boasts a modern design with sleek bodywork and a comfortable riding position. This manual provides comprehensive service procedures, maintenance schedules, and troubleshooting information for the CBR125R, ensuring optimal performance and safety.

GRAB RAIL

REMOVAL/INSTALLATION

Remove the mounting bolts and grab rail.

Install the grab rail and mounting bolts, tighten the bolts to the specified torque.

TORQUE: 27 N·m (2.8 kgf·m, 20 lbf·ft)

BODY PANELS/EXHAUST SYSTEM

GRAB RAIL

REAR COWL

REMOVAL/INSTALLATION

Remove the following:

– Single seat (page 2-4)

– Grab rail (page 2-5)

Remove the bolts, collars, spacers and screws.

Release the bosses from the grommets of the fuel tank.

Be careful not to damage the rear cowl.

Carefully pull out both sides of the rear cowl, then remove it rearward.

Install the rear cowl in the reverse order of removal.

Insert the tabs to the slits of the rear fender.

BOLTS/COLLARS/ SPACERS SCREWS

BOLTS

REAR COWL

BOSS

GROMMET

TAB

SLIT

BOLTS

2-5

Key Features

Liquid-cooled engine
PGM-FI fuel injection
Sleek design
Lightweight
Powerful
Comfortable riding position
Comprehensive service manual

Frequently Answers and Questions

What type of engine oil is recommended for the CBR125R?

Honda recommends using "4-stroke motorcycle oil" or an equivalent with API classification SG or higher and JASO T 903 standard: MA. The viscosity should be SAE 10W-30.