REAR FENDER. Honda CBR125R

The Honda CBR125R is a lightweight and powerful motorcycle designed for both beginners and experienced riders. It features a liquid-cooled, single-cylinder engine with PGM-FI fuel injection, delivering reliable performance. The CBR125R also boasts a modern design with sleek bodywork and a comfortable riding position. This manual provides comprehensive service procedures, maintenance schedules, and troubleshooting information for the CBR125R, ensuring optimal performance and safety.

BODY PANELS/EXHAUST SYSTEM

REAR FENDER

REMOVAL/INSTALLATION

Remove the following:

– Brake/tail light (page 19-6)

– Battery (page 16-5)

Disconnect the turn signal light 2P (Orange and

Light blue) connectors and license light connectors.

CONNECTORS

Remove the starter relay switch and fuse boxes.

Release the wire harness from the rear fender.

FUSE BOXES

WIRE

HARNESS

Route the wires

properly (page 1-

18).

Remove the setting spring, seat lock key cylinder and retaining washer from the rear fender.

Remove the bolts and rear fender by pulling it rearward.

Install the rear fender in the reverse order of removal.

Insert the hooks of the rear fender into the frame.

KEY CYLINDER

BOLTS

STARTER RELAY SWITCH

REAR FENDER ASSEMBLY

HOOKS

FRAME

WASHER

SETTING SPRING

2-12

Key Features

Liquid-cooled engine
PGM-FI fuel injection
Sleek design
Lightweight
Powerful
Comfortable riding position
Comprehensive service manual

Frequently Answers and Questions

What type of engine oil is recommended for the CBR125R?

Honda recommends using "4-stroke motorcycle oil" or an equivalent with API classification SG or higher and JASO T 903 standard: MA. The viscosity should be SAE 10W-30.