SERVICE INFORMATION. Honda CBR125R

FRONT WHEEL/SUSPENSION/STEERING

SERVICE INFORMATION

GENERAL

• When servicing the front wheel, fork or steering stem, support the motorcycle using a safety stand or hoist.

• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc with a high quality brake degreasing agent.

• After the front wheel installation, check the brake operation by applying the brake lever.

• Use only tires marked "TUBELESS" and tubeless valves on rim marked "TUBELESS TIRE APPLICABLE".

• For brake system information (page 15-3).

SPECIFICATIONS

ITEM

Minimum tire thread depth

Cold tire pressure Standard

With cargo

Axle runout

Wheel rim runout Radial

Axial

Wheel balancer weight

Fork Spring free length

Pipe runout

Recommended fork fluid

Except

CM type

CM type only

Fluid level

Fluid capacity

STANDARD

–

200 kPa (2.00 kgf/cm 2 , 29 psi)

200 kPa (2.00 kgf/cm 2 , 29 psi)

–

–

–

–

412.4 (16.24)

–

Honda ULTRA CUSHION OIL 10W or equivalent

Pro Honda Suspension Fluid SS-8

(10W) or equivalent

131 (5.2)

206 ± 2.5 cm

3 lmp oz)

(7.0 ± 0.08 US oz, 7.3 ± 0.09

Unit: mm (in)

SERVICE LIMIT

0.8 (0.03)

–

–

0.2 (0.01)

2.0 (0.08)

2.0 (0.08)

60 g max.

404.1 (15.91)

0.20 (0.008)

–

–

–

–

TORQUE VALUES

Front brake disc bolt

Front axle nut

Handlebar weight screw

Handlebar pinch bolt

Fork socket bolt

Fork bolt

Bottom bridge pinch bolt

Top bridge pinch bolt

Steering stem adjusting nut

Steering stem nut

Front brake caliper mounting bolt

Clutch lever pivot bolt

Clutch lever pivot nut

42 N·m (4.3 kgf·m, 31 lbf·ft)

59 N·m (6.0 kgf·m, 44 lbf·ft)

9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)

27 N·m (2.8 kgf·m, 20 lbf·ft)

20 N·m (2.0 kgf·m, 15 lbf·ft)

23 N·m (2.3 kgf·m, 17 lbf·ft)

27 N·m (2.8 kgf·m, 20 lbf·ft)

23 N·m (2.3 kgf·m, 17 lbf·ft)

–

88 N·m (9.0 kgf·m, 65 lbf·ft)

30 N·m (3.1 kgf·m, 22 lbf·ft)

1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)

6.0 N·m (0.6 kgf·m, 4.4 lbf·ft)

ALOC bolt; replace with a new one.

U-nut

Apply locking agent to the threads.

See page 13-30

ALOC bolt; replace with a new one.

13-3

FRONT WHEEL/SUSPENSION/STEERING

TOOLS

Attachment, 37 x 40 mm

07746-0010200

Attachment, 42 x 47 mm

07746-0010300

Pilot, 12 mm

07746-0040200

Driver

07749-0010000

Bearing remover shaft

07746-0050100

Bearing remover head, 12 mm

07746-0050300

Oil seal remover

07748-0010001

Steering stem driver

07946-4300101

Steering stem socket

07916-3710101

Ball race remover

07GMD-KS40100

13-4