ERA770A Eng Instr Man | Terminal Programming

Terminal Programming

Use the following procedure to select any option included in the terminal group:

1.

In the SETTING window, select “8 TERMINAL.”

• The TERMINAL window will appear.

2.

Select any option from the following options list:

1 MACHINE#:

2 CONSECUTIVE#:

Machine number

Consecutive number

3 INTERVAL TIMER: Interval timer

4 DEFAULT MENU LEVEL Default menu level

5 AVAILABLE GLU CODE Available GLU code

6 BILL NUMBER Bill number

The following illustration shows those options included in the terminal programming group.

8 TERMINAL 1 MACHINE#

2 CONSECUTIVE#

3 INTERVAL TIMER

4 DEFAULT MENU LEVEL

5 AVAILABLE GLU CODE

6 BILL NUMBER

See “Machine number” on page 150 .

See “Consecutive number” on page 150 .

See “Interval timer” on page 150 .

See “Default menu level” on page 151 .

See “Available GLU code” on page 151 .

See “Bill number” on page 151 .

149

Machine number

When your store has two or more POS terminals, it is practical to assign them unique machine numbers for their identification.

Program the item as follows:

• MACHINE# (Use the numeric entry)

Machine number (max. 6 digits: 0 to 999999)

Consecutive number

The consecutive number is increased by one each time a receipt is issued.

Program the item as follows:

• CONSECUTIVE# (Use the numeric entry)

Enter a number (max. 4 digits: 0 to 9999) that is one less than a desired starting number.

Interval timer

You can program the timer for THE TILL TIMER TM and the screen save mode timer.

Program each item as follows:

• TILL TIMER (Use the numeric entry)

The POS terminal counts the number of times the drawer is left open for longer than a programmed time limit. The counter will be incremented by one each time a programmed time limit is reached. The time limit for THE TILL TIMER

TM can be preset for 0 to 255 seconds. The count is printed on the transaction report and server report. If the number “0” is entered, this function is unavailable.

• SCREEN SAVE (Use the numeric entry)

Screen save mode timer (max. 2 digits: 0 to 99 minutes)

If the number “0” is entered, the POS terminal will turn the display off after 100 min., if it remains idle.

150

Default menu level

You can preset the menu level to be returned after item entry.

Program the item as follows:

• DEF. MENU LEVEL (Use the numeric entry)

Default menu level (1 to 10)

Available GLU #

You can specify the range of GLU numbers available for each terminal.

Program the item as follows:

• START CODE (Use the numeric entry)

Start Table#/PBLU code (max. 8 digits: 1 to 99999999)

• END CODE (Use the numeric entry)

End Table#/PBLU code (max. 8 digits: 1 to 99999999)

Bill number

A consecutive bill number is automatically increased each time a receipt is issued.

Program the item as follows:

• BILL NUMBER (Use the numeric entry)

Enter a number (max. 4 digits: 0 to 9999) that is one less than a desired starting number.

151