ERA770A Eng Instr Man | GLU Code Programming

GLU Code Programming

Use the following procedure to select any option included in the GLU code group:

1.

In the SETTING window, select “15 GLU CODE.”

• The GLU CODE window will appear.

2.

Select any item from the following options list:

1 GLU: Table#/PBLU code

2 DRIVE THRU: Drive-through code

The following illustration shows those options included in the Table#/PBLU code programming group.

15 GLU CODE 1 GLU

2 DRIVE THRU

See “Table#/PBLU code” on page 174 .

See “Drive-through code” on page 174 .

173

Table#/PBLU code

You can program the range of available guest check codes (table# or PBLU code).

Program each item as follows:

• START CODE (Use the numeric entry)

Start GLU code (max. 8 digits: 1 to 99999999)

• END CODE (Use the numeric entry)

End GLU code (max. 8 digits: 1 to 99999999)

Drive-through code

You can program the range of available drive-through codes.

Program each item as follows:

• START CODE (Use the numeric entry)

Start drive-through code (max. 8 digits: 1 to 99999999)

• END CODE (Use the numeric entry)

End drive-through code (max. 8 digits: 1 to 99999999)

• TIME (Use the numeric entry)

Drive-through target time:

Enter the minute (2 digits) and the second (2 digits) in this sequence.

NOTE

When the customer’s waiting time is over the programmed target time, the terminal will display a warning.

174