ERA770A Eng Instr Man

ERA770A Eng Instr Man

184

Automatic Sequencing Key Programming

If you program frequently performed key operations for the AUTO keys, you can enter those key operations simply by pressing the corresponding AUTO keys in key operations.

To program an automatic sequencing key as follows:

Select “10 AUTO KEY MODE” from the mode selection window.

1.

Press a pertinent automatic sequencing key which you want to program.

AUTO

1

2.

Enter the desired sequence to use the automatic sequencing key in the programmed sequence.

700

9

CA/AT

3.

Press the automatic sequencing key again.

4.

Press the

MODE

key to finalize the programming.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents