Care and Cleaning. GE Appliances Profile 21, Profile 24 CustomStyle, SIDE-BY-SIDE REFRIRATOR 22, Brand Expression Guidelines 2.0

Add to My manuals
77 Pages

advertisement

Care and Cleaning. GE Appliances Profile 21, Profile 24 CustomStyle, SIDE-BY-SIDE REFRIRATOR 22, Brand Expression Guidelines 2.0 | Manualzz

Replacing the light bulbs.

Turning the control to the OFF position does not remove power to the light circuit.

Initial Setting C

Coldest E

Freezer

TEMPERATURE CONTROLS

Initial Setting 5

Coldest 9

Fresh Food

Fresh Food Compartment—Upper Light

1

2

Unplug the refrigerator.

To align the control knobs properly, note position of each knob for proper reassembly, move both knobs all the way to the left, then pull them off.

3 To remove the light shield, pull it straight out.

After replacing with an appliance bulb of the same or lower wattage, reinstall the light shield.

Replace the control knobs, move them to their previous settings and plug the refrigerator back in.

Fresh Food Compartment—Lower Light

(on some models)

This light is located either behind the top drawer or right above the top drawer (depending on your model).

1

2

Unplug the refrigerator.

If the light is behind the top drawer you will need to remove the drawer and the shelf above it. See the About storage drawer removal and About the refrigerator shelves sections.

3 Grasp the bottom of the light shield and pull it forward and up.

After replacing with an appliance bulb of the same or lower wattage, replace the shield. If the light was behind the top drawer, you will need to replace the drawer and the shelf above it. Plug the refrigerator back in.

Freezer Compartment

3

1

2

Unplug the refrigerator.

Remove the shelf just below light shield.

(The shelf will be easier to remove if it is emptied first.)

Pull the light shield toward you to reach the bulb.

After replacing with an appliance bulb of the same or lower wattage, reinstall the shield and shelf and plug the refrigerator back in.

13

advertisement

Related manuals