Printer Specifications. Epson LQ-510
advertisement
Printer Specifications
Printing
Print method:
Print speed:
Quality
Draft
LQ
24-pin impact dot matrix
Characters per inch
10
12
10
12
Characters/second/line
150
180
50
60
Printing direction:
Line spacing:
Paper feed speed:
(continuous feed)
Bidirectional logic-seeking for text printing. Unidirectional for graphics
(can also be switched to bidirectional by using the proper software command when DIP switch 2-6 is on).
l/6 inch or programmable in increments of
1/360th of an inch
Single sheet: 2.2 inches per set
(100 ms/line)
Continuous: 2.2 inches per sec
(100 ms/line)
8-2 Technical Specifications
Printable columns:
Character spacing
10 cpi
10 cpi condensed
12 cpi
12 cpi condensed
Input buffer:
Optional fonts:
Maximum printed characters
80
137
96
160
8 KB/1 KB
(DIP switch selectable)
LQ Epson Courier
LQ Epson Prestige
LQ Epson Script
LQ Epson OCR-B
LQ Epson OCR-A
LQ Epson Orator
LQ Epson Orator-S
Character fonts:
Font
Epson Draft
Epson Roman
Epson Sans Serif
Available sizes
(Characters per inch)
10, 12, 15
10, 12, 15, Proportional
10, 12, 15, Proportional
Printer Specifications
Characters: 96 standard ASCII character set (including italic characters)
15 international character sets
Epson Extended Graphics character set
Technical Specifications 8-3
Printer Specifications
Paper
Paper width:
Paper Length:
Printable area:
Single sheet
Continuous
Envelope
Labels
(continuous only)
Single sheet
7.2 to 10.1 inches
(182 to 257 mm)
4 to 10 inches
(101 to 254 mm)
6.5 or 9.5 inches
(166 or 240 mm)
21/2 x 15/16 inches
(minimum)
(63.5 x 23.8 mm)
7.2 to 14.3 inches
(182 to 364 mm)
Single sheet
8-4 Technical Specifications
Continuous paper
Printer Specifications
0.51 inches (13 mm) or more (both sides) when the 4 to 9.5 inch
(101 mm to 242 mm) width paper is used.
0.98 inches (25 mm) or more (both sides) when the 10 inch (254 mm) width paper is used.
Note: Envelope printing is only available at normal temperature.
Load the envelope with its long side horizontal.
Technical Specifications 8-5
Printer Specifications
Paper weight:
Paper thickness:
Copy Capacity:
Single Sheet 14 lb to 24 lb
Continuous 14 lb to 22 lb
Multi-part forms
Envelope
12 lb to 15 lb per sheet.
Maximum number sheets = 3
12 lb to 24 lb
Single Sheet 0.0025 to 0.0055 inches
(0.065 to 0.14 mm)
Continuous 0.0025 to 0.01 inches
(0.065 to 0.25 mm)
Envelope
Label
(with backing)
0.0063 to 0.0197 inches
(0.16 to 0.52 mm)
0.01 inches
(Maximum 0.28 mm)
Up to 3 sheets including the original.
Total thickness must not exceed 0.01 inches
(0.25 mm>.
.
24 lb paper printing is only available at normal temperature.
.
Labels with a pressure-sensitive paper joined by line or dot glue and with a total thickness less than or equal to
0.0118
inches (0.3 mm) can be printed out under conditions of 40°F to
95°F (5°C to 35°C) and
10% to
80% humidity.
8-6 Technical Specifications
Printer Specifications
Mechanical
Paper feeding methods: Friction
Push tractor
Cut sheet feeder (optional)
Pull tractor (optional)
Ribbon: Cartridge ribbon, available in black:
#7753
#7768 (film)
Life expectancy of ribbon:
MCBF:
#7753: 2,000,000 characters
(in Letter Quality characters, at 48 dots/character)
#7768: 200,000 characters
(in Letter Quality characters, at 48 dots/character)
For all components excluding print head:
3,000,000 lines
MTBF:
Print head life:
4000 power on hours (duty 25%)
200,000,000 strokes/wire
Dimensions and weight: (excluding knobs and paper guides)
Height:
Width:
Depth:
Weight:
5.51 inches (139.9 mm)
16.46 inches (418.0 mm)
13.66 inches (347.0 mm)
13 lbs (6 kg approx.)
Technical Specifications 8-7
Printer Specifications
Electrical
Voltage:
Power consumption:
120 VAC ± 10%
100 watts maximum
Frequency: 50 ± 0.5 Hz, 60 ± 0.5 Hz
Insulation resistance: 10 Mohms between AC power line and chassis
Dielectric strength Can withstand 1.25 kV rms
(between AC line and applied for one minute chassis):
Environment
Temperature:
Humidity:
Shock:
Vibration:
Operation angle:
Operation: 40°F to 95°F (5°C to 35°C)
Storage: -22°F to 140°F (-30°C to 60°C)
Operation:
Storage:
10% to 80% (noncondensing)
5% to 85% (noncondensing)
Operation: Up to 1 G within 1 ms
Storage: Up to 2 G within 1 ms
Operation: Up to 0.25 G at up to 55 Hz
Storage: Up to 0.50 G at up to 55 Hz
Less than 15° (without cut sheet feeder)
0° (with cut sheet feeder)
8-8 Technical Specifications
advertisement