4.2.2 DHCP Server. Asus RT-AC1300UHP

Add to my manuals
122 Pages


4.2.2  DHCP Server. Asus RT-AC1300UHP | Manualzz

To modify the LAN IP settings:

1. From the navigation panel, go to Advanced Settings > LAN >

LAN IP tab.

2. Modify the IP address and Subnet Mask.

3. When done, click Apply.

4.2.2 DHCP Server

Your wireless router uses DHCP to assign IP addresses automatically on your network. You can specify the IP address range and lease time for the clients on your network.


To configure the DHCP server:

1. From the navigation panel, go to Advanced Settings > LAN >

DHCP Server tab.

2. In the Enable the DHCP Server field, tick Yes.

3. In the Domain Name text box, enter a domain name for the wireless router.

4. In the IP Pool Starting Address field, key in the starting IP address.

5. In the IP Pool Ending Address field, key in the ending IP address.

6. In the Lease Time field, specify in seconds when an assigned

IP address will expire. Once it reaches this time limit, the DHCP server will then assign a new IP address.

7. In the DNS and Server Settings section, key in your DNS

Server and WINS Server IP address if needed.

8. Your wireless router can also manually assign IP addresses to devices on the network. On the Enable Manual Assignment field, choose Yes to assign an IP address to specific MAC addresses on the network. Up to 32 MAC Addresses can be added to the DHCP list for manual assignment.



Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals