Parts and features. Asus ZenPad 10 (Z300CL), ZenPad 10 (Z300CG), ZenPad 10 (Z300C), ZenPad 10 (ZD300C)
Advertisement
Advertisement
1
Get your Zen ready!
Parts and features
Take a hold of your device and have it up and running in a jiffy.
Get your Zen ready!
1
Ambient light sensor
Audio speakers
Front camera
Touch screen panel
Power button
Rear camera
Volume button
Microphone
Speaker/Headset port
Micro USB 2.0 port
Accessory connector
Micro SIM/microSD card compartment
IMPORTANT!
• Keep the device, particularly the touch screen, dry all the time. Water or other liquids can cause the touch screen to malfunction.
• Avoid covering the ambient light sensor with your screen protector to ensure an accurate detection of ambient light for optimal display effect.
NOTE:
• The card compartment's layout may vary per model.
• The micro SIM card slot is available on selected models.
Chapter 1: Get your Zen ready!
9
Installing a memory card
Your ASUS Tablet supports a microSD™, microSDHC™, and microSDXC™ memory card with up to
128 GB of capacity.
NOTE: Some memory cards may not be compatible with your ASUS Tablet. Ensure that you use only compatible memory cards to prevent loss of data, damage to your device, or memory card, or both.
CAUTION! Be extra careful when handling a memory card. ASUS is not responsible for any data loss or damage incurred to your memory card.
To install a memory card:
1. Orient your device as shown, and open the micro SIM/microSD card compartment.
CAUTION!
• Be careful not to damage the slot cover or injure your fingernails when you remove the cover.
• Do not forcibly remove, shear, or distort the memory card slot cover.
NOTE: The card compartment's layout may vary per model.
10 Chapter 1: Get your Zen ready!
2. Align and insert a memory card into the memory card slot.
3. Push the memory card all the way into the slot until it is seated firmly in place.
4. Put back the memory card slot cover.
NOTE: After installing a formatted memory card, you can access its contents from ASUS > File Manager
> Internal storage > sdcard .
Chapter 1: Get your Zen ready!
11
Removing a memory card
CAUTION!
• Be extra careful when handling a memory card. ASUS is not responsible for any data loss or damage incurred to your memory card.
• Eject the memory card properly to safely remove it from device. To eject the memory card, go to
Settings > Storage > Unmount external storage .
To remove a memory card:
1. Orient your device as shown, and open the micro SIM/microSD card compartment.
CAUTION!
• Be careful not to damage the slot cover or injure your fingernails when you remove the cover.
• Do not forcibly remove, shear, or distort the memory card slot cover.
NOTE: The card compartment's layout may vary per model.
12 Chapter 1: Get your Zen ready!
2. Press the memory card to eject, then pull it out.
3. Put back the memory card slot cover.
Chapter 1: Get your Zen ready!
13
Installing a micro SIM card (on selected models)
Your micro SIM card slot supports WCDMA and EDGE/GSM bands. Certain model supports WCDMA,
LTE, and GSM network bands.
NOTE: To prevent connector damage, ensure to use a standard micro SIM card without a SIM adapter or the use of a cutter.
CAUTION! Be extra careful when handling a micro SIM card. ASUS is not responsible for any data loss or damage incurred to your micro SIM card.
To install a micro SIM card:
1. Orient your device as shown, and open the micro SIM/microSD card compartment.
CAUTION!
• Be careful not to damage the slot cover or injure your fingernails when you remove the cover.
• Do not forcibly remove, shear, or distort the memory card slot cover.
14 Chapter 1: Get your Zen ready!
2. Align and insert a micro SIM card into the micro SIM card slot.
3. Push the micro SIM card all the way into the slot until it is seated firmly in place.
4. Put back the memory card slot cover.
Chapter 1: Get your Zen ready!
15
Removing a micro SIM card (on selected models)
CAUTION! Be extra careful when handling a micro SIM card. ASUS is not responsible for any data loss or damage incurred to your micro SIM card.
To remove a micro SIM card:
1. Orient your device as shown, and open the micro SIM/microSD card compartment.
CAUTION!
• Be careful not to damage the slot cover or injure your fingernails when you remove the cover.
• Do not forcibly remove, shear, or distort the memory card slot cover.
2. Press the micro SIM card to eject, then pull it out.
16 Chapter 1: Get your Zen ready!
3. Put back the memory card slot cover.
Charging your ASUS Tablet
Your ASUS Tablet comes partially charged but you must charge it fully before using it for the first time. Read the following important notices and cautions before charging your device.
IMPORTANT!
• Use only the bundled AC power adapter and micro-USB cable to charge your ASUS Tablet. Using a different AC power adapter and cable may damage your device.
• Peel off the protective film on the AC power adapter and micro-USB cable before using it with your device.
• Ensure to plug the AC power adapter to a compatible power outlet. You can plug the AC power adapter to any compatible 100~240V outlet.
• The output voltage of the AC power adapter for this device is DC 5.2V, 1.35A.
• When using your ASUS Tablet while plugged-in to a power outlet, the power outlet must be near your device and easily accessible.
• Do not use or expose your ASUS Tablet near liquids, rain, or moisture.
• Do not use your ASUS Tablet near heating equipment or in places where there is likelihood of high temperature.
• Keep your ASUS Tablet away from sharp objects.
• Do not place objects on top of your ASUS Tablet.
CAUTION!
• While charging, your ASUS Tablet can become warm. This is normal, however, if your device becomes unusually hot, disconnect the micro-USB cable from your device and send the device, including the
AC power adapter and cable to an ASUS-qualified service personnel.
• To prevent any damage to your ASUS Tablet, AC adapter, or micro-USB cable. Ensure that the micro-
USB cable, AC adapter, and your device are connected properly before charging.
Chapter 1: Get your Zen ready!
17
To charge your ASUS Tablet:
1. Connect the micro USB cable to the AC power adapter.
2. Plug the AC power adapter to a grounded power outlet.
3. Connect the micro USB cable to your ASUS Tablet.
IMPORTANT!
• Charge your ASUS Tablet for eight (8) hours before using it in battery mode for the first time.
• The status of battery charge is indicated by the following icons:
Low Not Charging Charging Full
4. When fully-charged, disconnect the USB cable from your ASUS Tablet first before unplugging the AC power adapter from the power outlet.
NOTE:
• You can use your device while charging but it may take longer to fully charge the device.
• Charging your device via USB port of a computer may take longer to fully charge the device.
• If your computer does not provide enough power for charging via USB port, charge your ASUS Tablet using the AC power adapter plugged to a power outlet instead.
18 Chapter 1: Get your Zen ready!
Turning your ASUS Tablet on or off
Turning your device on
To turn your device on, press and hold the power button until your device starts up.
Turning your device off
To turn your device off:
1. If your screen is turned off, press the power button to turn it on. If your screen is locked, unlock the device screen.
2. Press and hold the power button, then when prompted, tap Power off then tap OK .
Sleep mode
To put your device in sleep mode, press the power button once until the screen turns off.
Chapter 1: Get your Zen ready!
19
Basics
Explore the intuitive simplicity of ASUS Zen UI!
ASUS Zen UI is a charming and intuitive interface exclusively for ASUS Tablets. It provides you with special apps, which are integrated in or with other apps, to fit your unique individual needs and make your life easier while letting you have fun with your ASUS Tablet.
Find answers from FAQs (Frequently Asked Questions) or provide your feedbacks in the user forum.
With PixelMaster technology, capture those precious moments in vivid and high-quality photos and videos.
Get hold and act on your important emails, SMS messages, interesting websites, or other important tasks when it is more convenient for you to do so.
View meeting details, emails, and other event alerts or notifications at a glance right from your Home screen, Lock Screen, or What’s Next app.
Get maximum productivity from ZenLink, which comprises of Remote Link, Share Link and PC Link apps. Use any of these apps to connect with other devices for sharing and receiving files.
NOTE: Availability of the ZenLink apps vary with ASUS Tablet models.
NOTE: Availability of ASUS Zen UI 2.0 apps vary per region and ASUS Tablet model. Tap from your
Home screen to check the apps available on your ASUS Tablet.
20 Chapter 1: Get your Zen ready!
Starting for the first time
When you turn your ASUS Tablet on for the first time, Setup Wizard will guide you through the setup process. Follow the onscreen instructions to select your language, select input methods, set up your mobile network, Wi-Fi, sync accounts, and configure your location services.
Use your Google or ASUS account to set up your device, if you do not have a Google or ASUS account yet, go ahead and create one.
Google Account
Using a Google Account allows you to fully utilize these Android OS features:
• Organize and see all your information from anywhere.
• Automatically backup all your data.
• Leverage Google services conveniently from anywhere.
ASUS Account
Having an ASUS Account gets you to enjoy the following perks:
• Personalized ASUS support service and warranty extension for registered products.
• Free 5 GB of Cloud storage space.
• Receive the latest device and firmware updates.
NOTE: You can also use the Setup Wizard to reconfigure your device, any time at your convenience.
From the Home screen, tap > Tools > Setup Wizard .
Chapter 1: Get your Zen ready!
21
Battery power conservation tips
The battery charge is the lifeline of your ASUS Tablet. Here are some battery power conservation tips that helps preserve the power of your ASUS Tablet’s battery.
– Close all running apps that are not in use.
– When not in use, press the power button to put the device in sleep mode.
– Activate Smart Saving in Power Saver app.
– Set audio to Smart Mode.
– Decrease brightness of display.
– Keep the speaker volume to a low level.
– Disable Wi-Fi feature.
– Disable Bluetooth feature.
– Disable PlayTo feature.
– Disable GPS.
– Disable the screen auto-rotate feature.
– Disable all auto-sync features in your device.
22 Chapter 1: Get your Zen ready!
Advertisement