iX Developer

Add to my manuals
411 Pages

advertisement

iX Developer | Manualzz

Ribbon Tabs

8.3.3

Backlight Group

Select to automatically turn off the backlight after a certain number of seconds, and whether to keep the backlight on if a notifier window (e.g. alarm indicator or communication error message) is visible.

Backlight settings are supported only for operator panel targets. For other targets, the Microsoft Windows screen saver may be used.

8.3.4

Serial Ports Group

For each of the COM ports, select if it is to be configured as an RS232, RS422 or

RS485 port. Only available when an operator panel is selected as target.

Note:

The number of available ports and possible configuration differ depending on selected target.

For Panel TxA, TxB, TxC and IPC, four COM ports can be configured:

Port

COM1

COM2

COM3

COM4

Description

RS232 incl. CTS

RS422 or RS485

RS232 excl. CTS

RS422 incl. RTS or RS485

Port 1

Label on back of panel

Port 2

Beijer Electronics, MAEN831H

274

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents