Playing an MD. Sony DHC-MD595

Tips

• If you use a partially recorded MD, recording starts after the recorded tracks.

• Depending on the disc, CD TEXT information may also be recorded. If “TEXT” flashes during recording, press NAME EDIT/SELECT on the remote, and then press ENTER/YES on the remote to record the title of the current track. (If “TEXT” is lit, it is automatically recorded.)

• You can switch the recording mode before step 4 and record for long times. For details, see

“Recording for long times” on page 28.

Notes

• If the play mode is set to Repeat Play or Shuffle

Play, it automatically switches to normal play at step 4.

• If the MD is record protected, “C11” and

“Protected” appear alternately and the MD cannot be recorded. Remove the MD, then slide the record protection tab to the closed position (see page 24).

• If “Retry” flashes in the display, a reading failure has occurred, and the system is trying to read the data again (see page 27).

Playing an MD

To turn on the system, press

?/1

(power). You can play an MD just like a CD.

?/1 (power)

MD Z

2

MD x

MD/CD

.m/M>

VOLUME

1

Insert an MD.

With the arrow pointing toward the deck

With the label side up, and the shutter on the righthand side

2

Press MD

HS

.

Play starts. The H indicator on the

MD HS button lights green.

Track number Playing time

continued

11