Ice maker. Gaggenau RY 492 705, RY492705, RB 472 705, RB 492 705


Add to my manuals
103 Pages

advertisement

Ice maker. Gaggenau RY 492 705, RY492705, RB 472 705, RB 492 705 | Manualzz

en-us Faults – what to do?

Ice maker

The ice maker is not functioning.

Ice cube production is switched off.

Freezer compartment is too warm.

Ice cube container is not properly inserted.

Ice maker without power.

No water supply.

Low water pressure.

Kink in water hose.

Switch on ice cube production.

Set the temperature lower.

~ "Operating the appliance" on page 16

Insert ice cube container fully.

Call customer service.

~ "Customer service" on page 33

Check water connection and contact technician if necessary.

Only connect appliance to pipes with sufficient water pressure.

Turn off water supply, straighten out kink. Replace water hose, if necessary.

Too few or deformed ice cubes, water pressure lower than usual.

After switching on or removing many ice cubes, there will be too few in the ice cube container.

It takes around 24 hours for an empty ice cube container to fill up.

Ice cube production stops even though the ice cube container is still not full.

Low water pressure.

Do not store the ice shovel on the ice in the ice cube container. Otherwise, the sensor will not detect the actual fill level of the container.

Only connect appliance to pipes with sufficient water pressure.

The water filter is blocked or needs to be replaced.

Freezer compartment is too warm.

Replace water filter.

Set the temperature lower.

~ "Operating the appliance" on page 16

Water is leaking out of the appliance.

Water connection is not tight.

Check if the connections are fastened firmly and the water hose is undamaged.

If the water hose is damaged, contact customer service and have it replaced. Replacement must be performed by customer service or a similarly qualified person only.Use original parts supplied by the manufacturer only.

--------

32

Customer service

Customer service If you are unable to rectify the fault, please contact our customer service. We will always find an appropriate solution in order to avoid unnecessary visits by engineers.

The contact information for your nearest customer service can be found here or on the enclosed customer service list.

When calling, please state the product number (E-Nr.) and the production number (FD), which can be found on the rating plate.

~ "Getting to know your appliance" on page 11

Trust the expertise of the manufacturer.

You can therefore be sure that the repair is carried out by trained service engineers who carry original spare parts for your home appliances.

Appliance self-test

Your appliance features a self-test program which displays the fault your customer service can rectify.

1.

2.

3.

4.

5.

6.

Press à button to open the main menu.

Press C button to move to the menu item Self-test .

Press ™ button to start the self-test.

The self-test starts.

If faults are present, they will be displayed. In this case follow the instructions.

The appliance restarts.

The message that the self-test has finished is displayed for 10 seconds. To acknowledge the message, press ™ button.

When the self-test has ended, the appliance switches over to normal operation.

Customer service en-us

--------

Repair order and advice on faults

Contact information for all countries can be found on the enclosed customer service list.

US 877 442 4436 toll-free

33

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents