Installing the NVIDIA RAID Software Under W indows. Shuttle SN27P2, SN27P2 V2

Add to my manuals
62 Pages

advertisement

Installing the NVIDIA RAID Software Under W indows. Shuttle SN27P2, SN27P2 V2 | Manualzz

Installing the NVIDIA RAID Software Under Windows

This section describes how to run the setup application and install the RAID software 1 .

1.Start the nForce Setup program to open the NVIDIA Windows

nForce Drivers page.

2.Select the modules that you want to install.

Make sure that the “NVIDIA IDE Driver” is selected.

You must install the NVIDIA IDE driver in order to enable NVIDIA

MediaShield . If you do not install the NVIDIA IDE driver, NVIDIA

MediaShield will not be enabled.

3. Click Next and then follow the instructions.

4. After the installation is completed, be sure to reboot the PC.

5. After the reboot, initialize the newly created array.

See “Initializing and Using the Disk Array” on page 29.

19

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals