Copyright Notice. MSI B123

Add to My manuals
32 Pages


Copyright Notice. MSI B123 | Manualzz

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL� We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents� Our products are under continual improvement and we reserve the right to make changes without notice�


All trademarks are the properties of their respective owners�

Revision History




2015/ 12

Preface iii


Upgrade and Warranty

Please note that certain components, such as memory module, HDD, SSD, and bluetooth/WiFi card, etc�, preinstalled in the product may be upgradable or replaceable by user’s request depending on the models users purchased�

For any further information on the product users purchased, please contact the local dealer� Do not attempt to upgrade or replace any component of the product if users do not understand the component location or how to assembly/disassembly, since it may cause the product damaged� It is recommended that user contact the authorized dealer or service center for product service�

Acquisition of Replaceable Parts

Please be noticed that the acquisition of replaceable parts (or compatible ones) of the product users purchased in certain countries or territories may be fulfilled by the manufacturer within 5 years at most since the product has been discontinued, depending on the official regulations declared at the time. Please contact the manufacturer via http://www�msi�com/support/ for the detailed information about the acquisition of spare parts�

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor� Alternatively, please try the following help resources for further guidance� Visit the MSI website for technical guide, BIOS updates, driver updates and other information via http://www� msi�com/support/

Green Product Features

Reduced energy consumption during use and stand-by

Limited use of substances harmful to the environment and health

Reduced use of natural resources by encouraging recycling

Easily dismantled and recycled

Extended product lifetime through easy upgrades

Reduced solid waste production through take-back policy


Environmental Policy

The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life�

Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products�

Visit the MSI website and locate a nearby distributor for further recycling information�

Users may also reach us at gpcontdev@msi�com for information regarding proper Disposal, Take-back, Recycling, and Disassembly of MSI products�

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No� 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at: http://www�msi�com/html/popup/csr/evmtprtt_pcm�html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste� Please use the public collection system to return, recycle, or treat them in compliance with the local regulations�


For better environmental protection, waste batteries should be collected separately for recycling or special disposal� v

California, USA:

The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California�

For further information please visit: http://www�dtsc�ca�gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced� Replace only with the same or equivalent type recommended by the manufacturer�


Safety Instructions

◙ Read the safety instructions carefully and thoroughly�

All cautions and warnings on the equipment or user’s manual should be noted�

Keep the User’s Guide that comes with the package for future reference�

Keep this equipment away from humidity and high temperature�

Lay this equipment on a reliable flat surface before setting it up.

◙ Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power outlet� Do not disable the protective earth pin from the plug� The equipment must be connected to an earthed mains socket-outlet�

Always unplug the AC power cord before installing any add-on card or module to the equipment�

Always disconnect the AC power cord or switch the wall socket off if the equipment would be left unused for a certain time to achieve zero energy consumption�

The ventilator on the enclosure is used for air convection and to prevent the equipment from overheating� Do not cover the ventilator�

Do not leave the equipment in an unconditioned environment with a storage temperature above 60 may damage the equipment�

O C (140 O F) or below 0 O C (32 O F), which

NOTE: The maximum operating temperature is around 40 O C�


Never pour any liquid into the opening that could damage or cause electrical shock�

Place the power cord in a way that people are unlikely to step on it�

Do not place anything on the power cord�

◙ When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliably connected to protective earthing system of the building�

◙ Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code

(NEC), in particular Section 820�93, Grounding of Outer

Conductive Shield of a Coaxial Cable�

Always keep the strong magnetic or electrical objects away from the equipment�

If any of the following situations arises, get the equipment checked by service personnel:

◙ The power cord or plug is damaged�

◙ Liquid has penetrated into the equipment�

◙ The equipment has been exposed to moisture�

◙ The equipment does not work well or you can not get it work according to user’s manual�

◙ The equipment has dropped and damaged�

◙ The equipment has obvious sign of breakage� vii


CE Conformity

Hereby, Micro-Star International CO�, LTD declares that this device is in compliance with the essential safety requirements and other relevant provisions set out in the European Directive�

FCC-B Radio Frequency Interference


This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules�

These limits are designed to provide reasonable protection against harmful interference in a residential installation� This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications�

However, there is no guarantee that interference will not occur in a particular installation� If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:

■ Reorient or relocate the receiving antenna�

■ Increase the separation between the equipment and receiver�

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected�

■ Consult the dealer or an experienced radio/television technician for help�

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment�

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits�


This device complies with Part 15 of the FCC Rules� Operation is subject to the following two conditions:

1� this device may not cause harmful interference, and

2� this device must accept any interference received, including interference that may cause undesired operation�

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes effect on August

13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life�


RoHS Statement

Japan JIS C 0950 Material Declaration

A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. http://www�msi�com/html/popup/csr/cemm_jp�html http://tw�msi�com/html/popup/csr_tw/cemm_jp�html

India RoHS

This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�

Turkey EEE regulation

Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine restriction of hazardous substances

The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment�

Vietnam RoHS

As from December 1, 2012, all products manufactured by MSI comply with Circular

30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products� ix



Related manuals