How to Connect the Internet. MSI MS-16J3 BDW, MS-16J3

Add to My manuals
58 Pages

advertisement

How to Connect the Internet. MSI MS-16J3 BDW, MS-16J3 | Manualzz

How to Connect the Internet

Wireless LAN

Wireless LAN is a wireless broadband connection that allows you to connect to the

Internet without using any cables. Follow the instructions below to set up a Wireless

LAN connection.

▶ Wireless LAN Connection

1. Go to the desktop. Find the icon in the lower-right corner of the task bar and click on it to unfold the settings menu.

2. There are [Wi-Fi] and [Airplane mode] two options in the Network settings, select [Wi-Fi] here.

3. Choose one Wireless LAN connection from the network list to connect to the Internet. Click [Connect] to continue.

4. A security key may be required for connecting the selected network. Then click [Next].

3-13

▶ Check the Wireless LAN status

When Airplane mode is enabled, Wireless LAN connection will be turned off.

Before setting up a Wireless LAN connection, make sure that Airplane mode is turned off.

1. Go to the desktop. Find the icon in the lower-right corner of the task bar and click on it to unfold the settings menu.

2. Check if Wireless LAN mode is available in the Network settings.

3. Or, find the [SCM] icon in the lower-right corner of the task bar and click on it to bring out the main window of System Control Manager, please check if

Wireless LAN mode is turned on.

3-14

Wired LAN

Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your

Internet Service Provider (ISP) or network administrator for assistance of setting up

Internet connection.

▶ Dynamic IP/PPPoE Connection

1. Go to the desktop. Find the icon in the lower-right corner of the task bar, and then right click on it to select [Open Network and Sharing Center].

2. Choose [Change adapter settings].

3. Right click on [Ethernet] to select [Properties] from the drop-down menu.

4. In the Ethernet Properties window, select [Networking] tab and check

[Internet Protocol Version 4 (TCP/IPv4)]. Then click [Properties] to continue.

5. Select [General] tab, click [Obtain an IP address automatically] and [Obtain

DNS server address automatically]. Then click [OK].

Troubleshoot problems

Open Network and Sharing Center

3-15

3-16

▶ Broadband (PPPoE) Connection

1. Go to the desktop. Find the icon in the lower-right corner of the task bar, right click on it to select [Open Network and Sharing Center].

2. Select [Set up a new connection or network] under [Change your networking settings].

3. Select [Connect to the Internet], and then click [Next].

4. Click [Broadband (PPPoE)].

5. Fills User name, Password, and Connection name fields. Then click

[Connect].

Troubleshoot problems

Open Network and Sharing Center

3-17

3-18

▶ Static IP Connection

1. Follow the previous steps 1 to 4 in Dynamic IP/PPPoE Connection.

2. Select [General] tab and click [Use the following IP address] and [Use the following DNS server addresses]. You will be asked to fill the IP address,

Subnet mask, and Default gateway, and then click [OK].

3-19

advertisement

Related manuals

Download PDF

advertisement

Table of contents