Connections. TEAC UD-301


Add to my manuals
48 Pages

advertisement

Connections. TEAC UD-301 | Manualzz

8

Connections

V After all connections are complete, connect the power cord’s plug to the AC wall outlet.

o Read the instructions of each device that you intend to use with this unit.

o To avoid hum and noise, do not bundle the connection cords.

o Be sure to connect each plug securely.

Stereo amplifier or powered speakers

Audio input (LINE IN, etc.)

Computer

R L R L

Connect using a set of only one type.

Install the dedicated TEAC driver software on the computer before connecting the UD-301 unit to

the computer (see page 12).

A B

C

F

D

E

DIGITAL OUT

(OPTICAL)

Digital audio output device

DIGITAL OUT

(COAXIAL)

Digital audio output device

Wall outlet

A

Analog audio output jacks

Use these to output two channels of analog audio. Connect the XLR jacks or RCA jacks to a stereo amplifier or powered speakers.

Use commercially-available cables.

XLR: Balanced XLR cables

RCA: RCA audio cables

Connect the R jack of this unit to the right (R) jack of the amplifier and the L jack of this unit to the left (L) jack of the amplifier.

B

USB input port

Connect to the USB port of a computer to input digital audio from it.

Use a commercially-available USB cable.

o When using a Windows computer, you must install the dedicated driver on it before con-

necting it to this unit (see page 12). When

using a Macintosh computer, you do not need to install a driver.

C

Output level switch (LEVEL)

Set the audio level output from the analog audio output jacks.

FIX: The maximum volume level is always output. Use this setting when you want to adjust the volume using a connected amplifier. Audio will be output from the analog audio output jacks even when headphones are connected.

VARI: Output can be adjusted by the VOLUME knob on the front of the unit. Use this setting when you want to adjust the volume using this unit. Audio will not be output from the analog audio output jacks when headphones are connected.

OFF: Audio is never output from the analog audio output jacks.

o Regardless of the LEVEL setting, the

VOLUME knob on the front of the unit always adjusts the headphones output level.

D

Maintenance connector (UPDATE)

This connector is only for maintenance use.

Unless directed by our service department, do not connect anything to it.

E

Digital audio input connectors

Input digital audio. Connect to the digital audio output connectors of digital audio output devices.

COAXIAL: RCA digital coaxial cable

OPTICAL: Optical digital cable (TOS)

F

Power cord connector

Connect the supplied power cord to the power cord receptacle.

After all other connections are complete, connect the power cord's plug to a wall outlet.

V Do not use any power cord other than the one included with this unit. Use of other power cords could result in fire or electric shock. Unplug the power cord when you are not going to use the unit for several weeks.

9

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals