MOUNTING THE HEATER TO THE WALL. Haws 9326, 9327

Add to My manuals
48 Pages

advertisement

MOUNTING THE HEATER TO THE WALL. Haws 9326, 9327 | Manualzz

MOUNTING THE HEATER TO THE WALL

Please follow the mounting instructions as appropriate to your installation.

Haws

recommends the heater be installed close to the point of use.

CAUTION

This heater must be installed in a location where it is not subject to freezing temperatures, unless supplied with factory installed freeze protection

Make sure the brass fittings are at the bottom of the heater. No other heater orientation is permitted.

10” Top Clearance

8” Clearance

18” Clearance

The 932 6/7 series is approved for zero clearance to combustibles. Above clearances recommended for service and installation.

8” Clearance

4

advertisement

Related manuals