Where to install it. Asko DC 7171

Where to install it

 If the drying cabinet is to be built in, a connection to an exhaust ventilation duct must be available.

 There should be an earthed plug-in electric outlet socket within a distance of 2 metres from the upper part of the drying cabinet. The drying cabinet has a

2 metre long earthing cable with a plug connected to it. If the socket is not placed as mentioned above, the position of the drying cabinet should be adjusted so that no extension cable needs to be used.

 The electric socket should be easily within reach, after the drying cabinet has been installed. This should be taken into account even in the event of the drying cabinet being inbuilt into joinery or similar fittings. See also the section ’Electrical installation’.

 The floor should be able to stand the weight of the cabinet, approximately

60kg.

 The dryer should be level. Cabinet legs may be adjusted to a max of 2.5 cm to compensate for an uneven floor.

 The drying cabinet is only intended to be placed indoors at a temperature above

0° Celsius.

 The drying cabinet must not be installed in a place where high pressure water is used for cleaning.

Installation dimensions

595 mm

640 mm

1730 mm

610 mm

7