USING THE LOCK MENU. Toshiba 20AS24


Add to my manuals
28 Pages

advertisement

USING THE LOCK MENU. Toshiba 20AS24 | Manualzz

USING THE LOCK MENU

The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER and CHANGE PASSWORD functions.

You can use these functions after entering the correct PASSWORD. (This password is the same one selected under “SETTING THE

V-CHIP” on page 11.)

LOCKING CHANNELS

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting.

You can choose to lock up to nine TV channels and nine cable channels.

6 Repeat steps 1 through 5 to lock other channels. When you are finished locking channels, press

MENU

repeatedly until the menu screen is cleared.

1

2

3

4

Use the Channel Number Buttons (0–9) to display the television channel you wish to lock.

Press

MENU

, then press

SET +

or

until the indicator next to “LOCK” begins to flash. Then press

ENTER

.

Use the Channel Number buttons (0–9) to enter your password, then press

ENTER

.

LOCK

The LOCK menu appears.

CH LOCK

Press

SET +

or

until the indicator next to “CH LOCK” begins to flash, then press

ENTER

.

VIDEO LOCK

GAME TIMER

CHANGE PASSWORD

+ / – / ENTER / MENU

5

Press

SET +

or

to select:

INPUT to select the channel as one to

be locked. Then press

ENTER

.

ALL CLEAR to clear all channels from

the list of locked channels. Then press

ENTER

.

CH LOCK

CABLE

INPUT

--- --- ---

--- --- ---

--- --- ---

ALL CLEAR

+ / – / ENTER / MENU

LOCKING VIDEO INPUT

With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channel 3 and 4.

You will not be able to select the input sources with the

TV/

VIDEO

button or Channel buttons unless you clear the setting.

1

Press

MENU

, then press

SET +

or

until the indicator next to “LOCK” begins to flash, then press

ENTER

.

2

Use the Channel Number buttons (0–9) to enter your password, then press

ENTER

. The LOCK menu appears.

2

If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

NOTES:

• If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password.

• After programming CH LOCK, change channels before turning off the television.

• If you want to unlock channels, select ALL CLEAR in step 5, then press

ENTER

.

SETTING THE GAME TIMER

With the GAME TIMER feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, 90, or 120 minutes).

1 Press

MENU

, then press

SET +

or

until the indicator next to

“LOCK” begins to flash, then press

ENTER

.

Use the Channel Number buttons (0–9) to enter your password, then press

ENTER

. The LOCK menu appears.

3

Press

SET +

or

until the indicator next to “VIDEO LOCK” begins to flash, then press

ENTER

.

4

Press

SET +

or

to select:

OFF: Unlocks all video input sources.

VIDEO: Locks VIDEO.

VIDEO +: Locks VIDEO, channel 3 and channel 4.

This option should be used if you use the antenna to play a video tape.

⟨ ⟩

5

Press

MENU

repeatedly until the menu screen is cleared.

NOTE:

After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television.

3

4

5

Press

SET +

or

until the indicator next to

“GAME TIMER” begins to flash, then press

ENTER

.

Press

SET +

or

to select a time limit

(30 minutes, 60 minutes, 90 minutes, 120 minutes or OFF).

⟨ ⟩

Press

MENU

repeatedly until the menu screen is cleared.

After the GAME TIMER is programmed, the display will appear briefly every ten minutes to remind you that the GAME

TIMER is operating. When the programmed end time is reached, the display will change the channel automatically.

TO SET THE ON TIMER

This feature allows you to program the TV to turn on automatically at a set time and channel.

NOTE

: After a power failure or disconnection of the power, the timer setting will be lost.

1

Press

MENU

, then press

SET +

or

until the indicator next to “ON TIMER” begins to flash. Then press

ENTER

.

The ON TIMER menu appears.

ON TIMER

HOUR

MINUTE

CH 002

00h

00m

CANCEL

á+ / Ð / ENTER / MENUñ

2

3

Press

SET +

or

to set the desired hour (0–12), then press

ENTER

.

Press

SET +

or

to set the desired minute

(00, 05, 10, ...55), then press

ENTER

.

4

Press

SET +

or

to set the desired channel, then press

ENTER

.

ON TIMER

HOUR

MINUTE

CH 125

08h

15m

SET

á+ / Ð / ENTER / MENUñ

5

Press

SET +

or

to select the SET mode, then press

ENTER

.

6

Press

MENU

repeatedly until the menu screen is cleared.

NOTE:

To cancel the ON TIMER, select CANCEL in step 4 above. Press

MENU repeatedly until the menu screen is cleared.

12

3M21701A-E P09-BACK 12 5/2/04, 10:24

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals