advertisement
EN-47
CONNECTING TO A PICTBRIDGE COMPLIANT
PRINTER
If a printer that supports PictBridge is available, images can be printed by connecting the digital still camera directly to the PictBridge-compatible printer without using a computer.
Connecting the camera to the printer
1.
Connect the USB port on the camera and the USB jack on the printer with the supplied USB cable, then turn on your camera and the printer.
The screen for selecting the USB mode is displayed.
2.
Select [PRINTER] and press the OK button.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge menu is displayed on the monitor.
1.
Select the item you want to configure with the / buttons, and press the OK button.
[Images]: Select whether you want to print specific image or all images. You may also select printing number for specific image.
[Date Print]: According to the printer type, select whether you want to print the image with date imprint or not.
[Paper Size]: Select the desired paper size according to the printer type.
[Layout]: Select the desired printing layout according to the printer type.
[Print]: After all settings are configured, select this item to start printing.
2.
If you select [Images] in the previous step, the figure shown on the right hand side will appear.
Select [Select] or [All] with the / buttons, and press the OK button.
[Select]: Select to print multi images simultaneously.
[All]: Select to print all images.
[Exit]: Exit from Images option.
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.com/au
EN-48
3.
If you select [Select] in the previous step, the figure shown on the right hand side will appear.
J
Select the multi images that you want to print
J
J
simultaneously with the
/
buttons.
Select the [Print Num.] (up to 99) with the
/
buttons.
After selecting the desired image and printing number, press the
OK
button to confirm.
4.
Select [Exit] with the
/
buttons, and press the
OK
button.
5.
Select [Print] with the
/
buttons, and press the
OK
button to start printing.
6.
The printing starts and the figure shown on the right hand side appears.
J
The [Complete] will be displayed temporarily, reminding you that the printing procedure is finished.
J
J
If a print error is detected, the [Print Error] will be displayed.
The image printing may be failed if the power to the camera is cut off.
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.com/au
EN-49
Attention: Your product is marked with this symbol. It means that u s e d electrical and electronic p r o d u c t s should not be mixed w i t h g e n e r a l h o u s e h o l d w a s t e .
There is a separate collection system for these products.
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local dealer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your local dealer who will inform you about the takeback of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.com/au
EN-50
After Sales Support TEL: 1800 623 432 WEB: www.traveler-service.com/au
advertisement