Model Number Notes. Trane YSD240G4RHA0000, TSH210G3R0A0000, TSD210G3R0A0000, YSD150G3RLA0000, TSH150G4R0A0000, YSH240G4RHA0000, TSH300G3R0A0000, YSD210G3RLA0000, YSH210G3RLA0000, YSD180G3RLA0000

Add to My manuals
162 Pages

advertisement

Model Number Notes. Trane YSD240G4RHA0000, TSH210G3R0A0000, TSD210G3R0A0000, YSD150G3RLA0000, TSH150G4R0A0000, YSH240G4RHA0000, TSH300G3R0A0000, YSD210G3RLA0000, YSH210G3RLA0000, YSD180G3RLA0000 | Manualzz

Model Number Description

4 = Clogged Filter Switch and Fan

Failure switch 9

5 = Clogged Filter Switch and

Discharge Air Sensing 9

6 = Fan Failure Switch and Discharge

Air Sensing 9

7 = Clogged Filter Switch, Fan Failure

Switch and Discharge Air

Sensing 9

A = Condensate Drain Pan Overflow

Switch

B = Clogged Filter Switch and

Condensate Drain Pan Overflow

Switch 9

C = Fan Failure Switch and

Condensate Drain Pan Overflow

Switch 9

D = Discharge Air Sensing and

Condensate Drain Pan Overflow

Switch 9

E = Clogged Filter Switch, Fan Failure

Switch and Condensate Drain Pan

Overflow Switch

9

F = Clogged Filter Switch, Discharge

Air Sensing Tube and Condensate

Drain Pan Overflow Switch

9

G = Fan Failure Switch, Discharge Air

Sensing Tube and Condensate

Drain Pan Overflow Switch

9

H = Clogged Filter Switch, Fan Failure

Switch, Discharge Air Sensing and Condensate Drain Pan

Overflow Switch

9

Digit 26 - System Monitoring

Controls

0 = No Monitoring Controls

A = Demand Control Ventilation

(CO

2

)

16

B = FDD (Fault Detection and

Diagnostics)

C = FDD (Fault Detection Diagnostics)

& Demand Control Ventilation

(CO

2

)

16

Digit 27 - Unit Hardware

Enhancements

0 = No Enhancements

1 = Stainless Steel Drain Pan

Digit 28 - Short Circuit Current

Rating

0 = Standard SCCR

A = 65kA SCCR Option

19, 20

Digit 31 - Advanced Unit

Controls

0 = Standard Unit Controls

1 =

Human Interface 22

Note: Most Factory Installed Options available for Downflow Air

Discharge units only. Please verify with ordering system for availability.

Model Number Notes

1.

Some field set up required.

2. Requires ReliaTel Options Module.

3. Requires Economizer.

4. All 22 nd digit model numbers for reheat coil (B) require additional factory installed options: Frostat, and 2” pleated filters.

5. Must be ordered with Throughthe-Base Electrical option or

Horizontal-Side Access and either

Unit Mounted Disconnect or

Circuit Breaker.

6. Available factory installed on downflow AND horizontal units.

Verify with ordering system.

7.

Cannot be fused.

8. Must be factory installed when using Through-the-Base Options.

9. ReliaTel Options Module is required when ordering the following accessories: 4 Stage

Cooling, Clogged Filter Switch,

Fan Fail Switch, Condensate

Overflow Switch, Discharge Air

Sensing Kit, Frostat, Ventilation

Override, Smoke Detector,

Dehumidification and Modulating

Gas Heat Furnace.

10. Option cannot be ordered in conjunction with field installed economizer on downflow units.

Must be factory installed. The return air smoke detector may not fit up or work properly on the

Voyager units when used in conjunction with 3 rd party accessories (such as bolt on heat wheels, economizers, and power exhaust). Do not order the return air smoke detectors when using this type of accessory.

11. Unit mounted disconnect and circuit breakers are mutually exclusive of each other.

12. Through-the-base electrical option or Horizontal-Side Access must be ordered with either unit mounted disconnect or circuit breaker. When adding heat, you must order American Standard

Electric Heat.

13. Available on high efficiency units only.

RT-PRC043AC-EN

14. All Factory Installed Options are

Built-to-Order. Check order services for estimated production cycle.

15. For use with multi-speed and

SZVAV units only.

16. Demand Control Ventilation

Option includes wiring only. The

C0

2

sensor is a field-installed only option.

17. Frostat is standard on VAV and high efficiency units.

18. Supply and/or return smoke detector may not be used with the plenum smoke detector.

19. Only available where MOP is above 60A.

20. 575 VAC option is 25kA.

21. Standard filters are not available with Low Leak Economizers.

22. Human Interface is standard with

FDD (Fault Detection Diagnostics).

23

General Data

Table 3.

General data—cooling 12½–15 tons standard efficiency

Cooling Performance (a)

Gross Cooling Capacity

EER (Downflow/Horizontal) (b)

Nominal Airflow CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (d)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI (DF/HZ)

Indoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

TS*150G3,4,W,K YS*150G3,4,W,K TS*180G3,4,W,K YS*180G3,4,W,K

150,000

11

5,000 / 4,000

140,000

12.4/13.5

66/100

12.73

2 / Scrolls

9.2

Microchannel

0.71

25.9

1/23

Microchannel

1.00

17.30

2/16

TXV

1/1.00 NPT

150,000

11

5,000 / 4,000

140,000

12.2/13.5

66/100

12.73

2 / Scrolls

9.2

Microchannel

0.71

25.9

1/23

Microchannel

1.00

17.30

2/16

TXV

1/1.00 NPT

186,000

11

6,000 / 5,400

176,000

12.4/13.2

67/100

16.00

2 / Scrolls

9.2

Microchannel

0.71

35.2

1/23

Microchannel

0.81

23.00

2/16

TXV

1/1.00 NPT

186,000

11

6,000 / 5,400

176,000

12.2/13.2

67/100

16.00

2 / Scrolls

9.2

Microchannel

0.71

35.2

1/23

Microchannel

0.81

23.00

2/16

TXV

1/1.00 NPT

Propeller

2 / 26

Propeller

2 / 26

Propeller

2 / 26

Propeller

2 / 26

Direct / 1 Direct / 1 Direct / 1 Direct / 1

11,000 11,000 11,000 11,000

2 / 0.50

2 / 0.50

2 / 0.50

2 / 0.50

1,100 1,100 1,100 1,100

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized) (e)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

FC Centrifugal

1 / 15x15

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

56HZ / 56HZ

FC Centrifugal

1 / 15x15

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

56HZ / 56HZ

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0 or 7.5

(f)

1,740 / 3,450

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0 or 7.5

1,740 / 3,450

(f)

184TZ / 56HZ/184TZ 56HZ / 56HZ/184TZ

24 RT-PRC043AC-EN

General Data

Table 3.

General data—cooling 12½–15 tons standard efficiency

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

TS*150G3,4,W,K YS*150G3,4,W,K TS*180G3,4,W,K YS*180G3,4,W,K

Filters

Type Furnished (g)

Number Size Recommended

Throwaway Throwaway Throwaway Throwaway

Downflow

Horizontal

(2)20x20x2

(4)20x25x2

(2)20x20x2

(4)20x25x2

(2)20x20x2

(4)20x25x2

(2)20x20x2

(4)20x25x2

(4)20x20x2

(4)20x25x2

(8)20x25x2

(4)20x20x2

(4)20x25x2

(8)20x25x2

Refrigerant Charge

(Pounds of R-410A) (h)

Cir#1 / Cir#2 (DF)

Cir#1 / Cir#2 (HZ)

8.1/5.1

8.1/5.2

8.1/5.1

8.1/5.2

9.0/5.0

9.2/5.1

9.0/5.0

9.2/5.1

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(e)For 380V/60Hz units, the oversized motor (Indoor Fan) is used as the standard motor. Refer to oversized motor data.

(f) Offered only as a field installed accessory.

(g)An optional 2-inch pleated filter is also available.

(h)Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 4.

General data—heating—12½–15 tons standard efficiency

Heating Models

Heating Input (Btu/h)

1st Stage (Btu)

Heating Output (Btu/h)

1st Stage (Btu)

Steady State Efficiency%

No. Burners

No. Stages

Gas Supply Line Pressure (in. wc)

Natural or LP (minimum/maximum)

Gas Connection Pipe Size (in.)

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating

Turn Down

= 2.5:1 Low High

Modulating

Turn Down

= 2.5:1

150,000

100,000

120,000

80,000

80

1

250,000

175,000

200,000

140,000

80

1

2

2.5/14.0

2

2.5/14.0

Natural or LP Natural or LP

1/2 1/2

350,000

140,000

280,000

112,000

80

1

N/A

2.5/14.0

Natural Only

3/4

250,000

175,000

200,000

140,000

80

1

350,000

250,000

280,000

200,000

80

1

2

2.5/14.0

2

2.5/14.0

Natural or LP Natural or LP

1/2 3/4

350,000

140,000

280,000

112,000

80

1

N/A

2.5/14.0

Natural Only

3/4

(a) Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards

Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

RT-PRC043AC-EN 25

General Data

Table 5.

General data—17½–20 tons standard efficiency

Cooling Performance (a)

Gross Cooling Capacity

EER (Downflow/Horizontal) (b)

Nominal Airflow CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (d)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI (DF/HZ)

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized) (e)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

TS*210G3,4,W,K YS*210G3,4,W,K TS*240G3,4,W,K YS*240G3,4,W,K

210,000

11

7,000 / 6,125

196,000

12.4/13.2

67/100

17.82

2 / Scrolls

9.4

Microchannel

1.00

35.2

1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

14,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

56HZ / 184T

210,000

11

7,000 / 6,125

196,000

12.2/13.2

67/100

17.82

2 / Scrolls

9.4

Microchannel

1.00

35.2

1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

14,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

56HZ / 184T

259,000

10

8,000 / 6,400

240,000

11.6/12.4

67/100

24.00

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

15,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

56HZ / 184T

259,000

10

8,000 / 6,400

240,000

11.4/12.4

67/100

24.00

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

15,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

56HZ / 184T

26 RT-PRC043AC-EN

General Data

Table 5.

General data—17½–20 tons standard efficiency

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

TS*210G3,4,W,K YS*210G3,4,W,K TS*240G3,4,W,K YS*240G3,4,W,K

Filters

Type Furnished (f)

Number Size Recommended

Throwaway Throwaway Throwaway Throwaway

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A)

Cir#1/Cir#2 (DF)

Cir#1/Cir#2 (HZ)

(4)20x20x2

(4)20x25x2

(8)20x25x2

12.6/6.8

12.0/6.8

(4)20x20x2

(4)20x25x2

(8)20x25x2

12.6/6.8

12.0/6.8

(4)20x20x2

(4)20x25x2

(8)20x25x2

12.4/7.2

11.7/6.8

(4)20x20x2

(4)20x25x2

(8)20x25x2

12.4/7.2

11.7/6.8

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(e)For 380V/60Hz units, the oversized motor (Indoor Fan) is used as the standard motor. Refer to oversized motor data.

(f) Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 6.

General data—17½ standard efficiency

Cooling Performance (a)

Gross Cooling Capacity

EER (Downflow/Horizontal) (b)

Nominal Airflow CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (d)

Outdoor Coil

17½ Tons Downflow & Horizontal Units

TS*211G3,4,W YS*211G3,4,W

210,000

11

7,000 / 6,125

196,000

11.8/12.9

73/100

17.82

2 / Scrolls

9.4

210,000

11

7,000 / 6,125

196,000

11.8/12.9

73/100

17.82

2 / Scrolls

9.4

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI (DF/HZ)

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Microchannel

1.00

35.2

1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Microchannel

1.00

35.2

1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

RT-PRC043AC-EN 27

General Data

Table 6.

General data—17½ standard efficiency

17½ Tons Downflow & Horizontal Units

TS*211G3,4,W YS*211G3,4,W

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized) (e)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

Filters

Type Furnished (f)

Number Size Recommended

Propeller

2 / 26

Direct / 1

14,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

Throwaway

Propeller

2 / 26

Direct / 1

14,500

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

Throwaway

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A)

Cir#1/Cir#2 (DF)

Cir#1/Cir#2 (HZ)

(4)20x20x2

(4)20x25x2

(8)20x25x2

14.4/7.4

14.4/7.4

(4)20x20x2

(4)20x25x2

(8)20x25x2

14.4/7.4

14.4/7.4

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb.

Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard

340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or

340/360.

(d)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(e)For 380V/60Hz units, the oversized motor (Indoor Fan) is used as the standard motor. Refer to oversized motor data.

(f) Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

28 RT-PRC043AC-EN

General Data

Table 7.

General data—heating—17½–20 tons standard efficiency

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating

Turn

Down = 2.5:1 Low High

Modulating

Turn

Down =

2.5:1 Heating Models

Heating Input (Btu/h)

1st Stage (Btu)

Heating Output (Btu/h)

1st Stage (Btu)

Steady State Efficiency%

No. Burners

250,000

175,000

200,000

140,000

80

1

2

350,000

250,000

280,000

200,000

80

1

2

350,000

140,000

280,000

112,000

80

1

N/A

250,000

175,000

200,000

140,000

80

1

2

400,000

300,000

320,000

240,000

80

1

2

350,000

140,000

280,000

112,000

80

1

N/A No. Stages

Gas Supply Line Pressure (in. wc)

Natural or LP (minimum/maximum)

2.5/14.0

Natural or LP

1/2

2.5/14.0

Natural or LP

3/4

2.5/14.0

Natural Only

3/4

2.5/14.0

2.5/14.0

2.5/14.0

Natural or LP Natural or LP Natural Only

1/2 3/4 3/4 Gas Connection Pipe Size (in.)

(a)Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards

Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

RT-PRC043AC-EN 29

General Data

Table 8.

General data—25 ton standard efficiency

25 Tons Downflow & Horizontal Units

TS*300G3,4,W,K YS*300G3,4,W,K

Cooling Performance (a)

Gross Cooling Capacity

EER (Downflow/Horizontal) (b)

Nominal Airflow CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (d)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI (DF/HZ)

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

296,400

10

10,000 / 7,750

270,000

11.6/12.4

66/100

27

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 28

Direct / 1

16,100

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5 / N/A

3,470 / N/A

184T / N/A

296,400

10

10,000 / 7,750

270,000

11.4/12.4

66/100

27

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

Propeller

2 / 28

Direct / 1

16,100

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5 / N/A

3,470 / N/A

184T / N/A

30 RT-PRC043AC-EN

RT-PRC043AC-EN

General Data

Table 8.

General data—25 ton standard efficiency

25 Tons Downflow & Horizontal Units

TS*300G3,4,W,K YS*300G3,4,W,K

Filters

Type Furnished (e)

Number Size Recommended

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A) (f)

Cir#1/Cir#2 (DF)

Cir#1/Cir#2 (HZ)

Throwaway

(4)20x20x2 (4)20x25x2

(8)20x25x2

Throwaway

(4)20x20x2 (4)20x25x2

(8)20x25x2

12.5/6.7

11.7/6.7

12.5/6.7

11.7/6.7

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment

Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(e)An optional 2-inch pleated filter is also available.

(f) Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 9.

General data—25 tons standard efficiency

25 Tons Downflow & Horizontal Units

TS*301G3,4,W YS*301G3,4,W

Cooling Performance (a)

Gross Cooling Capacity

EER (Downflow/Horizontal) (b)

Nominal Airflow CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (d)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI (DF/HZ)

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

296,400

10

10,000 / 8,000

272,000

10.4/12.0

50/100

27.20

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

296,400

10

10,000 / 8,000

272,000

10.4/12.0

50/100

27.20

2 / Scrolls

9.4

Microchannel

1.0

35.2

1/23 / 1/20

Microchannel

1.00

23.00

2 / 16

TXV

1/1.00 NPT

31

General Data

Table 9.

General data—25 tons standard efficiency

25 Tons Downflow & Horizontal Units

TS*301G3,4,W YS*301G3,4,W

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

Filters

Type Furnished (e)

Number Size Recommended

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A) (f)

Cir#1/Cir#2 (DF)

Cir#1/Cir#2 (HZ)

Propeller

2 / 28

Direct / 1

16,100

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5 / N/A

3,470 / N/A

184T / N/A

Throwaway

(4)20x20x2 (4)20x25x2

(8)20x25x2

Propeller

2 / 28

Direct / 1

16,100

2 / 1.0

1125

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5 / N/A

3,470 / N/A

184T / N/A

Throwaway

(4)20x20x2 (4)20x25x2

(8)20x25x2

10.5

10.5

10.5

10.5

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment

Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(e)An optional 2-inch pleated filter is also available.

(f) Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

32 RT-PRC043AC-EN

RT-PRC043AC-EN

General Data

Table 10. General data—heating—25 tons

25 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating Turn

Down = 2.5:1 Heating Models

Heating Input (Btu/h)

1st Stage (Btu)

Heating Output (Btu/h)

250,000

175,000

200,000

400,000

300,000

320,000

350,000

140,000

280,000

1st Stage (Btu)

Steady State Efficiency%

No. Burners

No. Stages

Gas Supply Line Pressure (in. wc)

Natural or LP (minimum/maximum)

Gas Connection Pipe Size (in.)

140,000

80

1

2

2.5 / 14.0

Natural or LP

½

240,000

80

1

2

2.5 / 14.0

Natural or LP

¾

112,000

80

1

N/A

2.5 / 14.0

Natural Only

¾

(a)Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

33

General Data

Table 11. General data—12½–15 ton high efficiency

Cooling Performance (a)

Gross Cooling Capacity

EER (b)

Nominal CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2/Stage 3) (d)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (e)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

TH*150G3,4,W YH*150G3,4,W TH*180G3,4,W YH*180G3,4,W

152,400

12.1

5,000 / 4,000

144,000

13.5/15.0

30/70/100

11.90

2 / Scrolls

9.2

Microchannel

1.0

35.2

1 / 20

Hi-Performance

0.3125

26.00

4 / 15

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

2 / 0.50

1,100

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

145T / 145T

152,400

12.1

5,000 / 4,000

144,000

13.5/15.0

30/70/100

11.90

2 / Scrolls

9.2

Microchannel

1.0

35.2

1 / 20

Hi-Performance

0.3125

26.00

4 / 15

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

2 / 0.50

1,100

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

145T / 145T

180,500

12.1

6,000 / 5,250

174,000

14.0/15.0

32/68/100

14.38

2 / Scrolls

9.2

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

2 / 0.50

1,100

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

145T / 145T

180,500

12.1

6,000 / 5,250

174,000

14.0/15.0

32/68/100

14.38

2 / Scrolls

9.2

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

Propeller

2 / 26

Direct / 1

2 / 0.50

1,100

FC Centrifugal

1 / 18x18

Belt / 1

1

3.0 / 5.0

1,740 / 3,450

145T / 145T

34 RT-PRC043AC-EN

General Data

Table 11. General data—12½–15 ton high efficiency

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

TH*150G3,4,W YH*150G3,4,W TH*180G3,4,W YH*180G3,4,W

Filters

Type Furnished (f)

Number Size Recommended

Throwaway Throwaway Throwaway Throwaway

Downflow

Horizontal

Refrigerant Charge (Pounds of

R-410A) (g)

Downflow & Horizontal (Cir#1/Cir#2)

Optional Hot Gas Reheat Coil (Cir#1/Cir#2)

(4)20x20x2 (4)20x25x2 (4)20x20x2 (4)20x25x2

(8)20x25x2

12.5/7.1

9.2 / 6.9

(8)20x25x2

12.5/7.1

9.2 / 6.9

(8)20x20x2

(4)20x16x2

(12)20x20x2

13.0/8.5

10.9 / 8.9

(8)20x20x2

(4)20x16x2

(12)20x20x2

13.0/8.5

10.9 / 8.9

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)3 stages not available with Reheat models.

(e)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(f) An optional 2 inch pleated filter is also available.

(g)Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 12. General data—heating—12½-15 ton high efficiency

12½ Tons Downflow & Horizontal Units 15 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating

Turn Down

= 2.5:1 Low High

Modulating

Turn Down

= 2.5:1 Heating Models

Heating Input (Btu/h)

1st Stage (Btu)

Heating Output (Btu/h)

1st Stage (Btu)

Steady State Efficiency%

No. Burners

No. Stages

150,000 250,000 350,000

100,000 175,000 140,000

120,000 200,000 280,000

80,000 140,000 112,000

80 80 80

1 1 1

Gas Supply Line Pressure (in. wc) 2.5 / 14.0

Natural or LP (minimum/maximum)

Gas Connection Pipe Size (in.) ½

2.5 / 14.0

½

2.5 / 14.0

Natural Only

¾

250,000 350,000 350,000

175,000 250,000 140,000

200,000 280,000 280,000

140,000 200,000 112,000

80 80 80

1 1 1

2 2 N/A

2.5 / 14.0

2.5 / 14.0

2.5 / 14.0

½ ¾

Natural Only

¾

(a)Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards

Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

RT-PRC043AC-EN 35

General Data

Table 13. General data—17½–20 ton high efficiency

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

TH*210G3,4,W YH*210G3,4,W TH*240G3,4,W YH*240G3,4,W

Cooling Performance (a)

Gross Cooling Capacity

EER (b)

Nominal CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2/Stage 3) (d)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (e)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard/Oversized)

Motor rpm (Standard/Oversized)

Motor Frame Size (Standard/Oversized)

214,800

11.8

7,000 / 5,600

204,000

13.0/14.0

31/69/100

17.29

2 / Scrolls

9.2

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

214,800

11.8

7,000 / 5,600

204,000

13.0/14.0

31/69/100

17.29

248,500

11.0

8,000 / 6,400

234,000

12.4/14.0

30/70/100

21.27

248,500

11.0

8,000 / 6,400

234,000

12.4/14.0

30/70/100

21.27

Propeller

2 / 26

Direct / 1

Propeller

2 / 26

Direct / 1

Propeller

2 / 28

Direct / 1

Propeller

2 / 28

Direct / 1

15,800 15,800 16,500 16,500

2 / 1.0

1,125

2 / 1.0

1,125

2 / 1.0

1,125

2 / 1.0

1,125

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

2 / Scrolls

9.2

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

2 / Scrolls

9.4

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

2 / Scrolls

9.4

Microchannel

1.0

42.6

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

FC Centrifugal

1 / 18x18

Belt / 1

1

5.0 / 7.5

3,450 / 3,470

145T / 184T

36 RT-PRC043AC-EN

General Data

Table 13. General data—17½–20 ton high efficiency

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

TH*210G3,4,W YH*210G3,4,W TH*240G3,4,W YH*240G3,4,W

Filters

Type Furnished (f)

Number Size Recommended

Throwaway Throwaway Throwaway Throwaway

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A) (g)

Downflow & Horizontal (Cir#1/Cir#2)

Optional Hot Gas Reheat Coil (Cir#1/Cir#2)

(8)20x20x2

(4)20x16x2

(12)20x20x2

14.0 / 7.3

12.2/8.9

(8)20x20x2

(4)20x16x2

(12)20x20x2

14.0 / 7.3

12.2/8.9

(8)20x20x2

(4)20x16x2

(12)20x20x2

15.5 / 7.5

11.9 / 9.6

(8)20x20x2

(4)20x16x2

(12)20x20x2

15.5 / 7.5

11.9 / 9.6

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)3 stages not available with Reheat models.

(e)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(f) An optional 2 inch pleated filter is also available.

(g)Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 14. General data—heating—17½–20 ton high efficiency

Heating Models

Heating Input (Btu/h)

17½ Tons Downflow & Horizontal Units 20 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating

Turn

Down = 2.5:1

250,000 350,000 350,000

175,000 250,000 140,000

Heating Output (Btu/h) 200,000 280,000 280,000

140,000 200,000 112,000

Steady State Efficiency%

No. Burners

No. Stages

80 80 80

1 1 1

Gas Supply Line Pressure (in. wc)

Natural or LP (minimum/maximum)

Gas Connection Pipe Size (in.)

2 2 N/A

2.5 / 14.0

½

2.5 / 14.0

¾

2.5/14.0

Natural Only

¾

Low High

Modulating

Turn

Down = 2.5:1

250,000 400,000 350,000

175,000 300,000 140,000

200,000 320,000 280,000

140,000 240,000 112,000

80 80 80

1 1 1

2 2 N/A

2.5 / 14.0

2.5 / 14.0

2.5/14.0

½ ¾

Natural Only

¾

(a)Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards

Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

RT-PRC043AC-EN 37

General Data

Table 15. General data—25 ton high efficiency

25 Tons Downflow & Horizontal Units

TH*300G3,4,W YH*300G3,4,W

Cooling Performance (a)

Gross Cooling Capacity

EER (b)

Nominal CFM / ARI Rated CFM

ARI Net Cooling Capacity

Integrated Energy Efficiency Ratio (IEER) (One

Speed Fan / Multi or Variable Speed Fan) (c)

Percent Capacity @ part load

(Stage 1/Stage 2/Stage 3/Stage 4) (d)

System Power (kW)

Compressor

Number/Type

Sound

Outdoor Sound Rating (BELS) (e)

Outdoor Coil

Type

Coil Width (in.)

Face Area (sq. ft.)

Rows/FPI

Indoor Coil

Type

Tube Size (in.) ID

Face Area (sq. ft.)

Rows/FPI

Refrigerant Control

Drain Connection Number/Size (in.)

Outdoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds cfm

Number Motors/hp

Motor rpm

Indoor Fan

Type

Number Used/Diameter (in.)

Drive Type/No. Speeds

Number Motors

Motor hp (Standard)

Motor rpm (Standard)

Motor Frame Size (Standard)

292,300

10.6

10,000 / 8,000

274,000

12.4/15.0

25/50/75/100

25.85

3 / Scrolls

9.4

Microchannel

1.0

42.58

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

292,300

10.6

10,000 / 8,000

274,000

12.4/15.0

25/50/75/100

25.85

Propeller

2 / 28

Direct / 1

Propeller

2 / 28

Direct / 1

16,500 16,500

2 / 1.0

1,125

2 / 1.0

1,125

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5

3,470

184T

3 / Scrolls

9.4

Microchannel

1.0

42.58

1 / 20

Hi-Performance

0.3125

31.42

4 / 15

TXV

1/1.00 NPT

FC Centrifugal

1 / 18x18

Belt / 1

1

7.5

3,470

184T

38 RT-PRC043AC-EN

RT-PRC043AC-EN

General Data

Table 15. General data—25 ton high efficiency

25 Tons Downflow & Horizontal Units

TH*300G3,4,W YH*300G3,4,W

Filters

Type Furnished (f)

Number Size Recommended

Downflow

Horizontal

Refrigerant Charge

(Pounds of R-410A) (g)

Downflow & Horizontal (Cir#1/Cir#2)

Optional Hot Gas Reheat Coil (Cir#1/Cir#2)

Throwaway

(8)20x20x2 (4)20x16x2

(12)20x20x2

Throwaway

(8)20x20x2 (4)20x16x2

(12)20x20x2

11.8 / 10.6

13.2 / 11.4

11.8 / 10.6

13.2 / 11.4

(a)Cooling Performance is rated at 95°F ambient, 80°F entering dry bulb, 67°F entering wet bulb. Gross capacity does not include the effect of fan motor heat. ARI capacity is net and includes the effect of fan motor heat. Units are suitable for operation to ±20% of nominal cfm. Certified in accordance with the Unitary Large Equipment Certification Program, which is based on ARI Standard 340/360.

(b)EER is rated at ARI conditions and in accordance with ARI Standard 210/240 or 340/360.

(c) Integrated Energy Efficiency Ratio (IEER) is rated in accordance with AHRI standard 210/240 or 340/360.

(d)3 and 4 stages not available with Reheat models.

(e)Outdoor Sound Rating shown is tested in accordance with ARI Standard 270 or 370.

(f) An optional 2-inch pleated filter is also available.

(g)Refrigerant charge is an approximate value. For a more precise value, see unit nameplate and service instructions.

* Indicates both downflow and horizontal units.

Table 16. General data—heating—25 ton high efficiency

Heating Models

Heating Input (Btu/h)

1st Stage (Btu)

Heating Output (Btu/h)

1st Stage (Btu)

Steady State Efficiency%

No. Burners

No. Stages

Gas Supply Line Pressure (in. wc)

Natural or LP (minimum/maximum)

Gas Connection Pipe Size (in.)

25 Tons Downflow & Horizontal Units

Heating Performance (a) (Gas/Electric Only)

Low High

Modulating Turn

Down = 2.5:1

250,000 400,000 350,000

175,000 300,000 140,000

200,000 320,000 280,000

140,000 240,000 112,000

80 80 80

1 1 1

2.5 / 14.0

2.5 / 14.0

2.5/14.0

Natural Only

¾ ½ ¾

(a)Heating Performance limit settings and rating data were established and approved under laboratory test conditions using American National Standards Institute standards. Ratings shown are for elevations up to 2000 feet. For elevations above 2000 feet, ratings should be reduced at the rate of 4% for each 1000 feet above sea level.

39

Performance Data

Table 17. Gross cooling capacities 12½ tons three phase standard efficiency T/YS*150G3,4,W,K

Air

Flow cfm

4000

4500

5000

5500

6000

Air

Flow cfm

4000

Ent

DB

(°F)

75

80

85

90

75

75

80

85

90

85

90

75

80

85

80

85

90

75

80

90

Ent

DB

(°F)

61

153

161

142

147

156

164

157

161

159

159

158

164

85

67

157

161

105

138

158

164

173

172

173

174

174

173

73

124

154

63

97

130

163

61

Ambient Temperature

95

Entering Wet Bulb

67 73 61

105

67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

135

135

140

148

137

138

145

153

139

141

149

157

141

144

153

161

142

147

156

164

113

134

140

148

121

137

145

153

129

141

149

157

137

144

152

152

151

151

154

154

154

154

156

156

156

157

158

158

115

87

109

131

151

92

117

141

154

96

124

151

157

101

131

166

166

166

166

168

169

169

169

170

171

171

171

172

172

59

81

104

126

60

85

110

135

61

89

117

144

62

93

128

128

134

142

131

131

139

147

132

135

143

151

133

138

110

128

134

142

118

131

139

147

126

144

144

144

144

146

146

146

147

148

135 148

143 148

151 151

133 150

138 149

84

106

128

144

89

113

138

147

93

121

147

151

97

128

157

158

158

158

160

160

160

160

161

162

162

162

162

163

56

78

101 128.7 128.7 136.1 124.8 148.9 97.4

123 136.0 136.0 136.2 136.1 148.8 119.4

57

82

58

121.3 107.0 136.2 81.0 148.3 52.7

121.5 121.4 136.2 103.0 148.6 75.1

123.3 114.8 138.2 85.4 150.0 53.7

125.1 125.1 138.1 110.2 150.4 78.9

107 133.0 133.0 137.8 134.5 150.7 104.0

132 140.3 140.3 140.5 140.5 150.5 128.7

124.7 122.3 139.7 89.7 151.4 54.7

86 128.6 128.6 139.6 117.2 151.9 82.7

114 136.5 136.5 139.2 138.9 152.1 110.5

141 143.7 143.7 143.9 143.9 151.9 137.9

59 125.8 125.6 140.9 94.1 152.4 55.7

90 131.5 131.5 140.8 124.2 153.1 86.5

146

154

135

141

149

146 149

154 154

134 151

141 150

149 150

149

154

102

135

150

163

163

163

164

164

121 139.4 139.4 140.3 140.1 153.6 117.0

151 146.4 146.4 146.5 146.5 152.8 147.1

60 126.8 126.5 141.9 98.4 153.3 56.6

94 134.0 134.0 141.6 131.2 154.2 90.3

127 141.9 141.9 142.0 142.0 153.9 123.8

157

61

157 157 157 164

Ambient Temperature

120

Entering Wet Bulb

67 73

160 148.9 148.9 149.0 149.0 153.3 152.9

61

125

67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 114.1 103.8 127.9 77.7 138.5 49.3 110.4 102.1 123.6 76.0 133.4 47.5 106.5 100.4 119.0 74.1 127.9 45.6

80 115.3 115.3 127.9 99.7 138.9 71.7 112.3 112.3 123.6 98.0 133.7 69.9 109.1 109.1 119.1 96.2 128.3 68.1

85 122.6 122.6 127.8 121.5 139.2 94.0 119.3 119.3 123.3 119.7 134.1 92.3 115.7 115.7 118.7 117.8 128.8 90.4

90 129.4 129.4 129.5 129.5 139.2 116.0 125.8 125.8 125.9 125.9 134.1 114.3 121.9 121.9 122.0 122.0 128.7 112.4

4500

5000

75 115.8 111.5 129.6 82.0 140.0 50.3 111.8 109.7 125.1 80.3 134.6 48.4 107.8 107.6 120.4 78.5 128.9 46.5

80 119.0 119.0 129.5 106.8 140.4 75.5 115.8 115.8 125.0 105.0 135.1 73.7 112.3 112.3 120.3 103.2 129.5 71.8

85 126.4 126.4 129.2 129.0 140.7 100.6 122.8 122.8 124.7 124.5 135.3 98.7 119.0 119.0 120.0 119.8 129.7 96.8

90 133.1 133.1 133.2 133.2 140.5 125.2 129.1 129.1 129.3 129.3 135.2 123.4 124.9 124.9 125.0 125.0 129.5 121.5

75 116.9 116.7 130.9 86.4 141.0 51.2 113.0 112.8 126.3 84.6 135.5 49.4 108.9 108.7 121.4 82.8 129.7 47.5

80 122.1 122.1 130.8 113.8 141.7 79.3 118.7 118.7 126.1 112.0 136.3 77.5 114.9 114.9 121.3 110.2 130.6 75.6

85 129.5 129.5 130.4 130.2 141.8 107.0 125.7 125.7 125.9 125.8 136.3 105.2 121.6 121.6 121.7 121.7 130.5 103.3

90 135.9 135.9 136.0 136.0 141.5 134.4 131.6 131.6 131.7 131.7 135.9 132.4 127.0 127.0 127.1 127.1 130.0 129.5

75 118.0 117.8 131.9 90.7 141.8 52.1 114.0 113.8 127.2 88.9 136.2 50.3 109.9 109.8 122.2 87.1 130.3 48.4

80 124.7 124.7 131.7 120.8 142.7 83.0 121.0 121.0 127.0 119.0 137.3 81.2 117.1 117.1 121.9 117.1 131.5 79.4

5500

6000

85 132.0 132.0 132.1 132.1 142.6 113.5 127.9 127.9 128.0 128.0 137.0 111.6 123.6 123.6 123.7 123.7 131.1 109.7

90 138.2 138.2 138.3 138.3 142.0 141.6 133.7 133.7 133.8 133.8 136.3 135.9 128.8 128.8 128.9 128.9 130.3 130.0

75 118.9 118.8 132.7 94.9 142.5 53.1 115.3 115.3 127.8 93.1 136.8 51.2 111.6 111.6 122.8 91.3 130.8 49.3

80 126.8 126.8 132.4 127.7 143.7 86.9 123.0 123.0 127.4 125.8 138.0 85.1 118.9 118.9 122.2 121.9 132.0 83.1

85 134.0 134.0 134.1 134.1 143.2 119.9 129.7 129.7 129.8 129.8 137.5 118.1 125.2 125.2 125.3 125.3 131.5 116.2

90 140.3 140.3 140.3 140.3 142.4 142.0 135.5 135.5 135.6 135.6 136.7 136.4 130.4 130.4 130.4 130.4 130.8 130.5

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

* Stands for both downflow and horizontal unit.

40 RT-PRC043AC-EN

Performance Data

Table 18. Gross cooling capacities 15 tons three phase standard efficiency T/YS*180G3,4,W,K

Air

Flow cfm

4800

5400

6000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 163.2 138.4 185.0 107.5 206.8 74.7 155.6 134.9 176.1 103.9 195.7

70.7

147.4 131.1 166.3

99.8

183.0

66.1

80 162.9 162.6 185.1 134.2 206.9 101.8 155.4 155.2 176.2 130.5 195.8

97.7

147.3 147.0 166.3 126.5 183.1

93.1

85 164.5 164.4 185.0 160.7 206.9 128.7 157.8 157.7 176.0 157.1 195.9 124.6 151.2 151.2 166.2 152.9 183.2 120.0

90 173.3 173.3 184.6 184.2 207.0 155.3 167.1 167.1 175.7 175.4 195.9 151.3 160.1 160.1 166.1 165.8 183.2 146.7

75 167.9 148.7 190.1 113.9 211.1 76.6 159.8 145.1 180.5 110.0 198.9

72.2

150.9 141.1 170.0 105.8 185.0

67.4

80 167.5 167.2 190.1 143.8 211.2 107.0 159.6 159.3 180.5 140.0 199.0 102.7 151.0 150.7 170.0 135.8 185.2

97.8

85 170.5 170.5 189.9 173.5 211.3 137.2 164.2 164.2 180.3 169.6 199.1 132.9 157.1 157.1 169.8 165.4 185.3 128.0

90 180.7 180.7 189.4 189.1 211.3 167.2 174.0 174.0 180.0 179.7 199.2 162.9 166.3 166.3 169.8 169.5 185.4 158.0

75 171.7 158.9 194.2 120.0 214.3 78.2 163.1 155.1 184.1 115.9 201.1

73.6

153.9 151.0 173.0 111.6 186.5

68.6

80 171.3 171.0 194.2 153.2 214.4 112.0 162.8 162.6 184.1 149.2 201.3 107.4 154.0 153.9 173.0 144.9 186.6 102.3

85 176.6 176.6 193.8 186.2 214.4 145.5 169.8 169.8 183.6 181.7 201.4 141.0 162.2 162.2 172.5 172.1 186.7 135.9

6600

7200

Air

Flow cfm

4800

90 187.2 187.2 193.3 192.9 214.5 178.8 179.9 179.9 183.4 183.2 201.4 174.3 171.6 171.6 172.9 172.8 186.6 169.2

75 174.9 168.9 197.5 125.9 216.5 79.6 165.9 164.6 187.0 121.7 202.5

74.8

156.2 155.8 175.3 117.2 188.2

70.0

80 174.4 174.2 197.5 162.5 216.7 116.8 165.8 165.7 186.9 158.3 202.6 112.0 156.7 156.6 175.2 153.8 188.3 107.1

85 181.9 181.9 196.9 196.4 216.8 153.7 174.7 174.7 186.3 185.8 202.7 148.9 166.5 166.5 174.7 174.3 188.4 144.0

90 192.8 192.8 196.4 196.1 216.8 190.3 184.9 184.9 186.5 186.3 202.9 185.5 176.0 176.0 176.1 176.1 188.3 180.6

75 177.6 177.1 200.3 131.7 218.1 80.9 168.3 167.8 189.3 127.4 204.3

76.2

158.2 157.8 177.1 122.8 189.5

71.3

80 177.2 177.0 200.3 171.5 218.3 121.4 168.5 168.3 189.2 167.3 204.4 116.8 160.2 160.2 177.0 162.6 189.7 111.8

85 186.6 186.6 199.4 198.9 218.4 161.7 178.9 178.9 188.4 187.9 204.5 157.0 170.3 170.3 176.4 175.9 189.8 152.1

90 197.7 197.7 199.4 199.2 218.4 201.7 189.3 189.3 189.4 189.2 204.2 196.9 179.6 179.6 179.6 179.6 189.5 188.8

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 138.6 127.2 155.7 95.6 168.4 61.0 134.2 125.2 150.1 93.3 160.9

58.4

144.2

91.0

153.4

55.8

80 138.8 138.5 155.7 122.2 168.6 88.0 134.5 134.3 150.1 120.0 161.0

85.4

144.3 117.7 153.5

82.8

85 144.0 144.0 155.6 148.6 168.7 114.9 140.2 140.2 150.0 146.4 161.1 112.3 136.3 136.3 144.2 143.7 153.6 109.7

90 152.4 152.4 155.7 155.5 168.8 141.6 148.2 148.2 150.3 150.0 161.1 138.9 143.8 143.8 144.8 144.7 153.7 136.4

75 141.6 137.0 158.7 101.3 170.1 62.3 136.9 134.9 152.6 99.0 162.5

59.7

132.1 131.8 146.3

96.6

154.4

57.0

80 142.0 141.9 158.7 131.3 170.2 92.7 137.6 137.4 152.7 128.9 162.6

90.1

133.1 132.9 146.4 126.5 154.6

87.4

5400

6000

6600

85 149.3 149.3 158.4 158.0 170.3 122.8 145.2 145.2 152.5 152.1 162.7 120.3 140.8 140.8 146.3 145.9 154.7 117.6

90 157.8 157.8 159.0 158.8 170.4 152.8 153.1 153.1 153.3 153.1 162.8 150.3 147.9 147.9 148.0 148.0 154.8 147.6

75 144.0 143.6 160.9 106.9 171.6 63.5 139.0 138.6 154.5 104.5 163.5

60.9

134.0 133.6 147.8 102.0 155.0

58.1

80 144.8 144.8 160.9 140.2 171.7 97.3 140.7 140.7 154.5 137.7 163.7

94.6

136.5 136.5 147.8 135.2 155.2

91.8

85 153.8 153.8 160.6 160.3 171.8 130.9 149.2 149.2 154.4 154.0 163.8 128.2 144.4 144.4 147.9 147.5 155.4 125.4

90 162.2 162.2 162.3 162.3 171.8 164.2 156.8 156.8 156.9 156.9 163.8 161.5 150.8 150.8 150.8 150.8 155.6 154.8

75 146.0 145.6 162.6 112.4 172.5 64.8 140.8 140.4 155.9 109.9 164.1

62.0

135.4 135.1 148.9 107.3 155.2

59.1

80 148.4 148.4 162.6 149.0 172.7 101.9 144.1 144.1 155.9 146.5 164.3

99.2

139.6 139.6 148.9 143.9 155.5

96.3

85 157.5 157.5 162.3 161.9 172.9 138.8 152.6 152.6 155.6 155.2 164.5 136.1 147.2 147.2 148.8 148.5 155.8 133.2

90 165.5 165.5 165.6 165.6 172.9 172.2 159.3 159.3 159.4 159.4 164.7 164.0 152.2 152.2 152.2 152.2 156.1 155.5

7200

75 147.6 147.2 163.9 117.8 173.2 66.0 142.2 141.8 156.9 115.2 164.5

63.2

136.6 136.2 149.6 112.5 155.3

60.2

80 151.6 151.6 163.8 157.7 173.4 106.5 147.0 147.0 156.9 155.1 164.7 103.6 142.1 142.1 149.6 149.0 155.5 100.7

85 160.6 160.6 163.3 163.0 173.6 146.7 155.2 155.2 156.6 156.4 165.0 143.9 149.4 149.4 149.7 149.4 156.0 141.1

90 167.9 167.9 167.9 167.9 173.7 173.0 160.7 160.7 160.8 160.8 165.2 164.6 153.9 153.9 154.0 154.0 156.4 155.7

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

RT-PRC043AC-EN 41

Performance Data

Table 19. Gross cooling capacities 17½ tons three phase standard efficiency T/YS*210G3,4,W,K

Air

Flow cfm

5600

6300

7000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 186.0 161.1 210.2 124.5 233.8 85.5 176.4 156.7 199.5 120.1 221.1 80.9 166.4 152.2 188.0 115.4 207.2 76.0

80 185.1 184.9 209.9 155.7 233.8 117.2 175.8 175.6 199.3 151.4 221.1 112.6 166.2 166.1 187.8 146.7 207.3 107.7

85 191.8 191.8 209.4 186.6 233.7 148.7 184.3 184.3 198.6 182.2 221.0 144.1 176.1 176.1 187.1 177.5 207.2 139.2

90 203.1 203.1 208.5 208.2 233.5 180.1 195.2 195.2 198.0 197.7 220.9 175.5 186.5 186.5 187.0 186.9 207.0 170.5

75 189.9 172.8 214.5 131.5 237.5 87.3 179.9 168.3 203.2 126.9 224.3 82.7 169.5 163.7 191.1 122.1 209.7 77.6

80 189.1 188.9 214.2 166.6 237.5 123.0 179.8 179.7 203.0 162.1 224.3 118.4 171.3 171.3 190.9 157.3 209.8 113.3

85 199.0 199.0 213.3 201.1 237.4 158.5 191.0 191.0 202.1 196.4 224.2 153.8 182.3 182.3 190.0 189.1 209.8 148.9

90 210.7 210.7 212.4 212.2 237.1 193.7 202.2 202.2 202.4 202.4 223.9 189.0 192.8 192.8 193.0 193.0 209.5 183.9

75 193.1 184.2 218.0 138.3 240.3 89.1 182.8 179.0 206.3 133.6 226.6 84.4 171.9 171.4 193.7 128.7 211.5 79.2

80 193.0 193.0 217.6 177.2 240.4 128.8 185.0 185.0 205.9 172.6 226.7 124.0 176.3 176.3 193.3 167.7 211.7 118.9

85 205.2 205.2 216.5 213.8 240.3 168.2 196.7 196.7 204.5 204.1 226.7 163.5 187.4 187.4 191.9 191.6 211.8 158.4

7700

8400

Air

Flow cfm

5600

90 217.3 217.3 217.5 217.5 239.8 207.1 208.2 208.2 208.4 208.4 226.2 202.4 198.2 198.2 198.3 198.3 211.4 197.3

75 195.7 193.8 220.8 144.9 242.6 90.8 184.9 184.5 208.7 140.2 228.4 86.0 173.6 173.2 195.7 135.3 212.8 80.7

80 198.1 198.1 220.4 187.8 242.7 134.4 189.7 189.7 208.3 183.1 228.6 129.6 180.5 180.5 195.3 178.1 213.2 124.4

85 210.5 210.5 218.6 218.1 242.7 177.8 201.6 201.6 206.5 206.2 228.6 173.0 191.7 191.7 193.7 193.4 213.2 167.8

90 222.9 222.9 223.1 223.1 242.0 220.6 213.4 213.4 213.5 213.5 228.1 215.8 202.6 202.6 202.7 202.7 212.8 208.8

75 197.6 197.1 223.2 151.5 244.3 92.4 186.5 186.0 210.7 146.8 229.8 87.6 175.1 174.8 197.6 141.9 213.8 82.3

80 202.5 202.5 222.6 198.2 244.5 140.0 193.8 193.8 210.2 193.5 230.1 135.2 184.2 184.2 196.9 188.5 214.3 129.9

85 215.2 215.2 220.4 220.0 244.5 187.3 205.9 205.9 208.2 207.8 230.1 182.5 195.6 195.6 195.7 195.7 214.3 177.2

90 227.8 227.8 228.0 228.0 243.9 234.0 217.7 217.7 217.8 217.8 229.5 226.5 206.2 206.2 206.3 206.3 213.4 212.7

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 156.8 147.9 176.0 110.7 192.2 70.7 152.4 145.9 170.0 108.3 184.3 68.0

164.1 106.0 176.1 65.2

80 157.8 157.8 175.8 141.9 192.3 102.5 154.1 154.1 169.9 139.6 184.5 99.8

164.0 137.3 176.5 97.0

85 167.6 167.6 175.3 171.8 192.4 134.1 163.4 163.4 169.2 167.8 184.7 131.4 159.1 159.1 163.2 162.9 176.8 128.7

90 177.1 177.1 177.2 177.2 192.2 165.3 172.1 172.1 172.2 172.2 184.5 162.6 166.9 166.9 167.0 167.0 176.5 159.9

75 159.4 157.6 178.6 117.2 193.9 72.2 154.5 154.1 172.3 114.8 185.6 69.4 150.2 149.9 166.1 112.5 177.1 66.6

80 163.0 163.0 178.4 152.4 194.2 108.0 158.9 158.9 172.1 149.9 186.0 105.2 154.9 154.9 165.9 147.6 177.7 102.4

6300

7000

7700

85 173.0 173.0 177.3 177.0 194.3 143.5 168.3 168.3 171.1 170.8 186.2 140.8 163.4 163.4 164.9 164.6 177.9 138.0

90 182.5 182.5 182.7 182.7 194.1 178.6 177.0 177.0 177.2 177.2 186.0 175.9 171.1 171.1 171.2 171.2 177.7 172.5

75 161.1 160.8 180.6 123.7 195.1 73.7 156.2 155.9 174.2 121.3 186.5 70.8 151.7 151.4 167.8 118.9 177.7 67.9

80 167.4 167.4 180.3 162.7 195.6 113.5 162.9 162.9 173.8 160.2 187.2 110.7 158.5 158.5 167.3 157.8 178.6 107.8

85 177.4 177.4 179.1 178.7 195.7 152.9 172.2 172.2 172.7 172.5 187.3 150.1 166.8 166.8 166.9 166.9 178.6 147.2

90 187.0 187.0 187.1 187.1 195.4 190.8 180.9 180.9 181.0 181.0 187.0 185.9 174.4 174.4 174.5 174.5 178.1 177.5

75 162.7 162.4 182.3 130.3 195.9 75.2 157.6 157.3 175.7 127.8 187.1 72.3 153.1 152.9 169.2 125.3 178.1 69.3

80 171.1 171.1 181.8 173.0 196.6 118.9 166.3 166.3 175.1 170.3 188.1 116.1 161.5 161.5 168.5 166.3 179.4 113.3

85 181.2 181.2 181.3 181.3 196.6 162.3 175.6 175.6 175.7 175.7 188.0 159.4 169.7 169.7 169.8 169.8 179.1 156.8

90 190.5 190.5 190.6 190.6 196.0 195.3 183.8 183.8 183.9 183.9 187.2 186.7 176.6 176.6 176.7 176.7 178.2 177.7

8400

75 164.1 163.9 183.9 136.8 196.5 76.6 159.1 159.1 177.0 134.2 187.5 73.7 154.9 154.9 170.1 131.7

80 174.2 174.2 183.2 181.5 197.6 124.4 169.1 169.1 176.0 175.3 188.9 121.6 164.0 164.0 169.0 168.5

85 184.4 184.4 184.5 184.5 197.3 171.6 178.5 178.5 178.6 178.6 188.5 169.2 172.2 172.2 172.2 172.2

90 193.2 193.2 193.3 193.3 196.3 195.8 185.9 185.9 186.0 186.0 187.3 186.8 177.9 177.9 177.9 177.9

-

-

-

-

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

-

-

-

-

42 RT-PRC043AC-EN

Performance Data

Table 20. Gross cooling capacities 17½ tons three phase standard efficiency T/YS*211G3,4,W

Air

Flow cfm

5600

6300

7000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 186.0 161.1 210.2 124.5 233.8 85.5 176.4 156.7 199.5 120.1 221.1 80.9 166.4 152.2 188.0 115.4 207.2 76.0

80 185.1 184.9 209.9 155.7 233.8 117.2 175.8 175.6 199.3 151.4 221.1 112.6 166.2 166.1 187.8 146.7 207.3 107.7

85 191.8 191.8 209.4 186.6 233.7 148.7 184.3 184.3 198.6 182.2 221.0 144.1 176.1 176.1 187.1 177.5 207.2 139.2

90 203.1 203.1 208.5 208.2 233.5 180.1 195.2 195.2 198.0 197.7 220.9 175.5 186.5 186.5 187.0 186.9 207.0 170.5

75 189.9 172.8 214.5 131.5 237.5 87.3 179.9 168.3 203.2 126.9 224.3 82.7 169.5 163.7 191.1 122.1 209.7 77.6

80 189.1 188.9 214.2 166.6 237.5 123.0 179.8 179.7 203.0 162.1 224.3 118.4 171.3 171.3 190.9 157.3 209.8 113.3

85 199.0 199.0 213.3 201.1 237.4 158.5 191.0 191.0 202.1 196.4 224.2 153.8 182.3 182.3 190.0 189.1 209.8 148.9

90 210.7 210.7 212.4 212.2 237.1 193.7 202.2 202.2 202.4 202.4 223.9 189.0 192.8 192.8 193.0 193.0 209.5 183.9

75 193.1 184.2 218.0 138.3 240.3 89.1 182.8 179.0 206.3 133.6 226.6 84.4 171.9 171.4 193.7 128.7 211.5 79.2

80 193.0 193.0 217.6 177.2 240.4 128.8 185.0 185.0 205.9 172.6 226.7 124.0 176.3 176.3 193.3 167.7 211.7 118.9

85 205.2 205.2 216.5 213.8 240.3 168.2 196.7 196.7 204.5 204.1 226.7 163.5 187.4 187.4 191.9 191.6 211.8 158.4

7700

8400

Air

Flow cfm

5600

90 217.3 217.3 217.5 217.5 239.8 207.1 208.2 208.2 208.4 208.4 226.2 202.4 198.2 198.2 198.3 198.3 211.4 197.3

75 195.7 193.8 220.8 144.9 242.6 90.8 184.9 184.5 208.7 140.2 228.4 86.0 173.6 173.2 195.7 135.3 212.8 80.7

80 198.1 198.1 220.4 187.8 242.7 134.4 189.7 189.7 208.3 183.1 228.6 129.6 180.5 180.5 195.3 178.1 213.2 124.4

85 210.5 210.5 218.6 218.1 242.7 177.8 201.6 201.6 206.5 206.2 228.6 173.0 191.7 191.7 193.7 193.4 213.2 167.8

90 222.9 222.9 223.1 223.1 242.0 220.6 213.4 213.4 213.5 213.5 228.1 215.8 202.6 202.6 202.7 202.7 212.8 208.8

75 197.6 197.1 223.2 151.5 244.3 92.4 186.5 186.0 210.7 146.8 229.8 87.6 175.1 174.8 197.6 141.9 213.8 82.3

80 202.5 202.5 222.6 198.2 244.5 140.0 193.8 193.8 210.2 193.5 230.1 135.2 184.2 184.2 196.9 188.5 214.3 129.9

85 215.2 215.2 220.4 220.0 244.5 187.3 205.9 205.9 208.2 207.8 230.1 182.5 195.6 195.6 195.7 195.7 214.3 177.2

90 227.8 227.8 228.0 228.0 243.9 234.0 217.7 217.7 217.8 217.8 229.5 226.5 206.2 206.2 206.3 206.3 213.4 212.7

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 156.8 147.9 176.0 110.7 192.2 70.7 152.4 145.9 170.0 108.3 184.3 68.0

164.1 106.0 176.1 65.2

80 157.8 157.8 175.8 141.9 192.3 102.5 154.1 154.1 169.9 139.6 184.5 99.8

164.0 137.3 176.5 97.0

85 167.6 167.6 175.3 171.8 192.4 134.1 163.4 163.4 169.2 167.8 184.7 131.4 159.1 159.1 163.2 162.9 176.8 128.7

90 177.1 177.1 177.2 177.2 192.2 165.3 172.1 172.1 172.2 172.2 184.5 162.6 166.9 166.9 167.0 167.0 176.5 159.9

75 159.4 157.6 178.6 117.2 193.9 72.2 154.5 154.1 172.3 114.8 185.6 69.4 150.2 149.9 166.1 112.5 177.1 66.6

80 163.0 163.0 178.4 152.4 194.2 108.0 158.9 158.9 172.1 149.9 186.0 105.2 154.9 154.9 165.9 147.6 177.7 102.4

6300

7000

7700

85 173.0 173.0 177.3 177.0 194.3 143.5 168.3 168.3 171.1 170.8 186.2 140.8 163.4 163.4 164.9 164.6 177.9 138.0

90 182.5 182.5 182.7 182.7 194.1 178.6 177.0 177.0 177.2 177.2 186.0 175.9 171.1 171.1 171.2 171.2 177.7 172.5

75 161.1 160.8 180.6 123.7 195.1 73.7 156.2 155.9 174.2 121.3 186.5 70.8 151.7 151.4 167.8 118.9 177.7 67.9

80 167.4 167.4 180.3 162.7 195.6 113.5 162.9 162.9 173.8 160.2 187.2 110.7 158.5 158.5 167.3 157.8 178.6 107.8

85 177.4 177.4 179.1 178.7 195.7 152.9 172.2 172.2 172.7 172.5 187.3 150.1 166.8 166.8 166.9 166.9 178.6 147.2

90 187.0 187.0 187.1 187.1 195.4 190.8 180.9 180.9 181.0 181.0 187.0 185.9 174.4 174.4 174.5 174.5 178.1 177.5

75 162.7 162.4 182.3 130.3 195.9 75.2 157.6 157.3 175.7 127.8 187.1 72.3 153.1 152.9 169.2 125.3 178.1 69.3

80 171.1 171.1 181.8 173.0 196.6 118.9 166.3 166.3 175.1 170.3 188.1 116.1 161.5 161.5 168.5 166.3 179.4 113.3

85 181.2 181.2 181.3 181.3 196.6 162.3 175.6 175.6 175.7 175.7 188.0 159.4 169.7 169.7 169.8 169.8 179.1 156.8

90 190.5 190.5 190.6 190.6 196.0 195.3 183.8 183.8 183.9 183.9 187.2 186.7 176.6 176.6 176.7 176.7 178.2 177.7

8400

75 164.1 163.9 183.9 136.8 196.5 76.6 159.1 159.1 177.0 134.2 187.5 73.7 154.9 154.9 170.1 131.7

80 174.2 174.2 183.2 181.5 197.6 124.4 169.1 169.1 176.0 175.3 188.9 121.6 164.0 164.0 169.0 168.5

85 184.4 184.4 184.5 184.5 197.3 171.6 178.5 178.5 178.6 178.6 188.5 169.2 172.2 172.2 172.2 172.2

90 193.2 193.2 193.3 193.3 196.3 195.8 185.9 185.9 186.0 186.0 187.3 186.8 177.9 177.9 177.9 177.9

-

-

-

-

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

-

-

-

-

RT-PRC043AC-EN 43

Performance Data

Table 21. Gross cooling capacities 20 tons three phase standard efficiency T/YS*240G3,4,W,K

Air

Flow cfm

6400

7200

8000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 230.4 187.9 260.3 147.4 287.7 103.3 219.7 182.8 247.5 142.0 271.7 97.5 208.2 177.5 233.5 136.2 253.6 91.0

80 229.9 221.9 260.2 182.1 287.8 138.7 219.2 216.9 247.4 176.7 271.9 132.8 207.8 207.5 233.4 170.9 253.9 126.3

85 231.6 231.5 260.0 216.6 287.9 173.7 222.2 222.2 247.2 211.2 272.0 167.9 213.1 213.1 233.1 205.4 254.1 161.4

90 244.0 244.0 259.2 250.6 287.9 208.5 235.1 235.1 246.5 245.2 272.1 202.7 225.2 225.2 232.8 232.5 254.4 196.3

75 236.0 200.9 265.9 154.9 292.1 105.1 224.6 195.6 252.3 149.4 275.0 99.0 212.2 190.0 237.4 143.4 255.9 92.3

80 235.3 234.9 265.7 193.9 292.3 144.8 224.0 223.7 252.1 188.4 275.2 138.7 211.9 211.7 237.3 182.4 256.1 132.0

85 239.6 239.6 265.4 232.7 292.4 184.2 230.6 230.6 251.7 227.1 275.5 178.2 220.6 220.6 236.9 221.1 256.5 171.5

90 253.6 253.6 264.7 264.3 292.5 223.4 244.0 244.0 251.2 250.9 275.7 217.4 233.1 233.1 236.8 236.5 256.6 211.2

75 240.4 213.5 270.2 162.2 295.3 106.7 228.3 208.1 256.0 156.5 277.2 100.4 215.3 202.4 240.4 150.4 258.3 93.9

80 239.6 239.3 270.0 205.6 295.5 150.8 227.9 227.6 255.7 199.9 277.6 144.5 215.6 215.4 240.3 193.8 258.6 138.0

85 247.4 247.4 269.5 248.5 295.8 194.6 237.8 237.8 255.2 242.8 278.0 188.4 227.0 227.0 239.7 236.7 258.8 181.7

8800

9600

Air

Flow cfm

6400

90 261.8 261.8 268.9 268.5 295.9 238.2 251.4 251.4 255.0 254.7 278.1 232.0 239.5 239.5 240.4 240.2 258.4 225.6

75 243.8 225.9 273.8 169.4 297.6 108.2 231.2 220.4 258.9 163.6 279.5 101.9 217.8 214.6 242.7 157.3 260.1 95.4

80 243.2 242.9 273.5 217.1 298.0 156.7 231.5 231.3 258.8 211.5 279.5 150.4 219.1 219.1 242.7 205.1 260.4 143.9

85 254.2 254.2 272.7 264.2 298.3 204.9 243.9 243.9 258.0 257.1 279.9 198.5 232.4 232.4 242.1 241.6 260.5 192.0

90 268.8 268.8 272.5 272.3 298.4 252.8 257.6 257.6 258.7 258.4 279.8 246.5 244.7 244.7 244.9 244.9 260.4 239.8

75 246.6 238.2 276.6 176.5 299.5 109.6 233.8 232.7 261.3 170.6 281.4 103.5 219.9 219.4 244.6 164.2 261.5 96.9

80 246.7 246.5 276.5 228.6 299.8 162.5 234.7 234.7 261.3 222.7 281.7 156.4 223.6 223.6 244.5 216.3 261.9 149.8

85 260.1 260.1 275.5 274.8 300.3 215.2 249.2 249.2 260.3 259.7 281.7 209.0 237.0 237.0 243.7 243.3 262.2 202.4

90 274.9 274.9 276.0 275.8 300.2 267.3 262.9 262.9 263.1 263.1 281.3 260.9 249.0 249.0 249.2 249.2 261.8 254.3

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 196.3 172.1 218.4 130.1 234.3 84.1 190.2 169.3 210.4 126.9 224.3 80.6

202.2 123.7 214.0 77.1

80 196.0 195.8 218.4 164.8 234.5 119.4 190.1 189.9 210.5 161.7 224.6 116.0

85 203.1 203.1 218.1 199.3 234.6 154.4 198.0 198.0 210.2 196.1 224.9 151.0

-

-

-

-

202.4 158.5 214.4 112.4

202.2 192.9 214.8 147.5

90 214.2 214.2 218.0 217.8 234.7 189.3 208.2 208.2 210.3 210.1 225.0 185.9

202.5 202.3 214.9 182.4

75 199.5 184.4 221.4 137.1 236.4 85.5 193.1 181.5 213.0 133.8 226.0 82.0 186.8 178.8 204.4 130.4 215.2 78.4

80 199.6 199.5 221.4 176.2 236.7 125.3 193.6 193.5 213.1 172.9 226.4 121.7 187.8 187.8 204.6 169.6 215.7 118.1

7200

8000

8800

85 209.8 209.8 221.0 214.8 237.0 164.7 203.9 203.9 212.8 210.3 226.8 161.2 197.8 197.8 204.4 203.4 216.3 157.6

90 220.8 220.8 221.5 221.3 237.0 203.9 214.0 214.0 214.1 214.1 226.7 200.3 206.6 206.6 206.7 206.7 216.2 196.8

75 202.1 196.5 223.6 143.9 237.9 87.0 195.4 193.3 214.9 140.6 227.0 83.3 188.8 187.8 205.9 137.2 215.8 79.6

80 203.3 203.3 223.7 187.4 238.3 131.1 197.8 197.8 215.0 184.0 227.6 127.5 192.1 192.1 206.0 180.6 216.6 123.8

85 215.2 215.2 223.3 222.8 238.5 174.9 208.8 208.8 214.6 214.3 228.2 171.5 202.0 202.0 205.8 205.4 217.2 167.8

90 225.9 225.9 226.1 226.1 238.6 218.3 218.3 218.3 218.4 218.4 228.0 214.8 209.9 209.9 210.0 210.0 217.0 210.6

75 204.1 203.6 225.4 150.7 239.0 88.4 197.3 196.8 216.3 147.3 227.7 84.7 190.4 189.9 207.1 143.8

-

80 207.8 207.8 225.4 198.5 239.5 136.9 201.8 201.8 216.3 195.1 228.5 133.3 195.7 195.7 207.1 191.6

85 219.7 219.7 224.9 224.5 240.0 185.2 212.7 212.7 215.9 215.5 229.0 181.6 205.2 205.2 206.8 206.4

90 229.8 229.8 229.9 229.9 239.7 232.8 221.2 221.2 221.3 221.3 228.9 224.7 212.2 212.2 212.3 212.3

-

-

-

-

-

-

9600

75 205.8 205.3 226.7 157.5 239.7 89.8 198.5 198.1 217.4 154.0 228.2 86.0 191.4 191.0

80 211.6 211.6 226.6 209.5 240.4 142.7 205.2 205.2 217.3 206.0 229.1 139.1 198.5 198.5

85 223.3 223.3 226.1 225.7 240.9 195.4 215.8 215.8 216.9 216.5 229.6 191.7 207.7 207.7

90 232.6 232.6 232.7 232.7 240.7 239.0 223.6 223.6 223.7 223.7 229.5 228.8 214.5 214.5

-

-

-

-

-

-

-

-

-

-

-

-

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

-

-

-

-

44 RT-PRC043AC-EN

Performance Data

Table 22. Gross cooling capacities 25 tons three phase standard efficiency T/YS*300G3,4,W,K

Air

Flow cfm

7000

8000

9000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 257.6 212.0 289.0 165.3 317.0 114.6 245.8 206.5 274.9 159.4 299.4 108.2 233.1 200.6 259.5 153.1 279.6 101.1

80 257.0 250.5 288.9 204.5 317.1 154.5 245.3 244.2 274.8 198.7 299.5 148.1 232.7 232.3 259.5 192.4 279.8 141.0

85 259.2 259.1 288.8 243.6 317.2 194.2 249.7 249.7 274.6 237.7 299.7 187.7 239.4 239.4 259.2 231.3 280.1 180.7

90 273.4 273.4 287.9 282.0 317.2 233.5 263.5 263.5 274.1 273.6 299.8 227.1 252.3 252.3 258.7 258.4 280.4 220.2

75 264.4 228.7 295.5 175.0 321.8 116.8 251.7 223.0 280.5 168.9 302.9 110.1 238.0 216.8 264.2 162.4 281.8 102.7

80 263.5 263.0 295.4 219.8 322.0 162.4 250.9 250.6 280.4 213.7 303.1 155.7 237.6 237.4 264.1 207.3 282.0 148.3

85 270.1 270.1 295.0 264.3 322.1 207.6 259.9 259.9 279.9 258.2 303.4 201.0 248.6 248.6 263.6 251.6 282.5 193.7

90 285.1 285.1 294.2 293.7 322.2 252.7 274.1 274.1 279.3 279.0 303.6 246.1 261.6 261.6 263.6 263.4 282.7 238.7

75 269.4 245.0 300.5 184.4 325.2 118.8 256.0 239.1 284.8 178.2 305.1 111.8 241.7 232.8 267.6 171.5 284.3 104.8

80 268.4 268.1 300.4 234.8 325.4 170.0 255.7 255.5 284.7 228.6 305.4 163.1 242.3 242.1 267.6 222.1 284.5 156.0

85 279.4 279.4 299.7 284.7 325.7 221.0 268.4 268.4 283.9 278.5 305.9 214.1 256.1 256.1 267.0 266.2 284.7 206.9

10000

11000

Air

Flow cfm

7000

90 294.7 294.7 299.1 298.8 325.8 271.6 282.6 282.6 284.2 284.0 306.1 264.8 268.8 268.8 269.0 269.0 284.4 257.6

75 273.3 261.1 304.4 193.6 327.7 120.8 259.5 255.0 288.0 187.3 307.8 114.0 244.7 244.0 270.1 180.4 286.4 106.9

80 273.1 272.9 304.3 249.8 328.0 177.7 260.3 260.3 288.1 243.4 307.8 170.8 248.3 248.3 270.2 236.5 286.7 163.8

85 287.3 287.3 303.3 302.5 328.3 234.3 275.4 275.4 287.0 286.2 307.9 227.3 262.1 262.1 269.1 268.5 286.9 220.4

90 302.6 302.6 303.8 303.5 328.2 290.4 289.5 289.5 289.7 289.7 307.7 283.6 274.4 274.4 274.5 274.5 286.4 276.4

75 276.5 275.7 307.6 202.8 330.2 122.9 262.3 261.6 290.6 196.3 310.1 116.2 247.0 246.2 272.1 189.3 288.1 109.0

80 277.6 277.6 307.6 264.5 330.3 185.5 266.1 266.1 290.6 258.0 310.3 178.8 253.4 253.4 272.0 251.0 288.4 171.5

85 293.9 293.9 306.1 305.3 331.2 247.7 281.3 281.3 289.1 288.4 310.4 241.0 267.1 267.1 270.8 270.4 288.6 233.8

90 309.2 309.2 309.4 309.4 330.3 309.3 295.0 295.0 295.2 295.2 309.5 302.3 278.5 278.5 278.7 278.7 288.1 286.9

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 219.7 194.5 243.0 146.4 258.2 93.6 212.8 191.4 234.3 143.0 247.2 89.8

236.0 85.9

80 219.4 219.2 243.0 185.7 258.2 133.4 212.8 212.5 234.3 182.3 247.5 129.7

85 228.2 228.2 242.7 224.7 258.5 173.0 222.2 222.2 234.1 221.2 247.8 169.3

90 239.8 239.8 242.5 242.2 258.7 212.5 233.0 233.0 234.1 233.9 247.9 208.7

75 223.7 210.5 246.5 155.4 260.3 95.4 216.5 207.3 237.3 151.9 248.8 91.5

80 224.1 224.0 246.6 200.4 260.5 140.9 217.8 217.8 237.4 196.8 249.1 137.1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

236.2 125.8

236.6 165.5

236.8 204.9

227.8 148.2 236.9 87.5

228.0 193.2 237.3 133.1

8000

9000

10000

85 236.1 236.1 246.2 243.9 260.9 186.2 229.4 229.4 237.1 236.4 249.6 182.4

90 247.4 247.4 247.6 247.6 260.9 231.2 239.5 239.5 239.7 239.7 249.6 227.3

75 226.8 224.9 249.1 164.3 261.8 97.2 219.3 218.6 239.4 160.7 249.9 93.3

80 230.0 230.0 249.1 214.9 262.2 148.5 223.5 223.5 239.5 211.2 250.3 144.6

85 242.4 242.4 248.5 248.1 262.5 199.5 234.9 234.9 238.9 238.5 250.7 195.6

-

-

-

-

-

-

-

-

-

-

227.6 227.1 238.0 178.6

231.1 231.1 238.0 223.4

229.5 156.9

229.6 207.4

229.1 228.7

-

-

-

-

-

-

90 252.9 252.9 253.0 253.0 262.4 249.9 243.8 243.8 243.9 243.9 251.0 246.1

233.9 233.9

75 229.3 228.7 251.0 173.2 263.2 99.2 221.2 220.7 241.0 169.4 250.7 95.1 213.2 212.8 230.8 165.7

80 235.2 235.2 250.9 229.2 263.6 156.2 228.2 228.2 240.9 225.5 251.4 152.2 220.9 220.9 230.7 221.7

85 247.3 247.3 250.1 249.6 263.9 212.8 239.1 239.1 240.3 240.0 251.7 208.8 230.3 230.3 230.4 230.4

90 256.6 256.6 256.7 256.7 263.7 262.7 246.2 246.2 246.3 246.3 251.6 250.6 236.1 236.1 236.2 236.2

-

-

-

-

-

-

-

-

-

-

11000

75 230.8 230.4 252.4 182.0 264.0 101.1 222.7 222.3 242.1 178.2 251.2 97.0 214.6 214.1

80 239.4 239.4 252.2 243.6 264.7 163.8 232.0 232.0 242.0 238.9 252.1 159.8 224.1 224.1

85 251.0 251.0 251.7 251.3 264.9 226.1 242.1 242.1 242.2 242.2 252.4 222.0 232.5 232.5

90 258.7 258.7 258.8 258.8 264.6 263.8 248.7 248.7 248.8 248.8 252.1 251.4 237.7 237.7

-

-

-

-

-

-

-

-

-

-

-

-

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

-

-

-

-

RT-PRC043AC-EN 45

Performance Data

Table 23. Gross cooling capacities 25 tons three phase standard efficiency T/YS*301G3,4,W

Air

Flow cfm

7000

8000

9000

Ambient Temperature

Ent

DB

(°F)

85 95

Entering Wet Bulb

105

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 257.6 212.0 289.0 165.3 317.0 114.6 245.8 206.5 274.9 159.4 299.4 108.2 233.1 200.6 259.5 153.1 279.6 101.1

80 257.0 250.5 288.9 204.5 317.1 154.5 245.3 244.2 274.8 198.7 299.5 148.1 232.7 232.3 259.5 192.4 279.8 141.0

85 259.2 259.1 288.8 243.6 317.2 194.2 249.7 249.7 274.6 237.7 299.7 187.7 239.4 239.4 259.2 231.3 280.1 180.7

90 273.4 273.4 287.9 282.0 317.2 233.5 263.5 263.5 274.1 273.6 299.8 227.1 252.3 252.3 258.7 258.4 280.4 220.2

75 264.4 228.7 295.5 175.0 321.8 116.8 251.7 223.0 280.5 168.9 302.9 110.1 238.0 216.8 264.2 162.4 281.8 102.7

80 263.5 263.0 295.4 219.8 322.0 162.4 250.9 250.6 280.4 213.7 303.1 155.7 237.6 237.4 264.1 207.3 282.0 148.3

85 270.1 270.1 295.0 264.3 322.1 207.6 259.9 259.9 279.9 258.2 303.4 201.0 248.6 248.6 263.6 251.6 282.5 193.7

90 285.1 285.1 294.2 293.7 322.2 252.7 274.1 274.1 279.3 279.0 303.6 246.1 261.6 261.6 263.6 263.4 282.7 238.7

75 269.4 245.0 300.5 184.4 325.2 118.8 256.0 239.1 284.8 178.2 305.1 111.8 241.7 232.8 267.6 171.5 284.3 104.8

80 268.4 268.1 300.4 234.8 325.4 170.0 255.7 255.5 284.7 228.6 305.4 163.1 242.3 242.1 267.6 222.1 284.5 156.0

85 279.4 279.4 299.7 284.7 325.7 221.0 268.4 268.4 283.9 278.5 305.9 214.1 256.1 256.1 267.0 266.2 284.7 206.9

10000

11000

Air

Flow cfm

7000

90 294.7 294.7 299.1 298.8 325.8 271.6 282.6 282.6 284.2 284.0 306.1 264.8 268.8 268.8 269.0 269.0 284.4 257.6

75 273.3 261.1 304.4 193.6 327.7 120.8 259.5 255.0 288.0 187.3 307.8 114.0 244.7 244.0 270.1 180.4 286.4 106.9

80 273.1 272.9 304.3 249.8 328.0 177.7 260.3 260.3 288.1 243.4 307.8 170.8 248.3 248.3 270.2 236.5 286.7 163.8

85 287.3 287.3 303.3 302.5 328.3 234.3 275.4 275.4 287.0 286.2 307.9 227.3 262.1 262.1 269.1 268.5 286.9 220.4

90 302.6 302.6 303.8 303.5 328.2 290.4 289.5 289.5 289.7 289.7 307.7 283.6 274.4 274.4 274.5 274.5 286.4 276.4

75 276.5 275.7 307.6 202.8 330.2 122.9 262.3 261.6 290.6 196.3 310.1 116.2 247.0 246.2 272.1 189.3 288.1 109.0

80 277.6 277.6 307.6 264.5 330.3 185.5 266.1 266.1 290.6 258.0 310.3 178.8 253.4 253.4 272.0 251.0 288.4 171.5

85 293.9 293.9 306.1 305.3 331.2 247.7 281.3 281.3 289.1 288.4 310.4 241.0 267.1 267.1 270.8 270.4 288.6 233.8

90 309.2 309.2 309.4 309.4 330.3 309.3 295.0 295.0 295.2 295.2 309.5 302.3 278.5 278.5 278.7 278.7 288.1 286.9

Ambient Temperature

Ent

DB

(°F)

115 120

Entering Wet Bulb

125

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 219.7 194.5 243.0 146.4 258.2 93.6 212.8 191.4 234.3 143.0 247.2 89.8

236.0 85.9

80 219.4 219.2 243.0 185.7 258.2 133.4 212.8 212.5 234.3 182.3 247.5 129.7

85 228.2 228.2 242.7 224.7 258.5 173.0 222.2 222.2 234.1 221.2 247.8 169.3

90 239.8 239.8 242.5 242.2 258.7 212.5 233.0 233.0 234.1 233.9 247.9 208.7

75 223.7 210.5 246.5 155.4 260.3 95.4 216.5 207.3 237.3 151.9 248.8 91.5

80 224.1 224.0 246.6 200.4 260.5 140.9 217.8 217.8 237.4 196.8 249.1 137.1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

236.2 125.8

236.6 165.5

236.8 204.9

227.8 148.2 236.9 87.5

228.0 193.2 237.3 133.1

8000

9000

10000

85 236.1 236.1 246.2 243.9 260.9 186.2 229.4 229.4 237.1 236.4 249.6 182.4

90 247.4 247.4 247.6 247.6 260.9 231.2 239.5 239.5 239.7 239.7 249.6 227.3

75 226.8 224.9 249.1 164.3 261.8 97.2 219.3 218.6 239.4 160.7 249.9 93.3

80 230.0 230.0 249.1 214.9 262.2 148.5 223.5 223.5 239.5 211.2 250.3 144.6

85 242.4 242.4 248.5 248.1 262.5 199.5 234.9 234.9 238.9 238.5 250.7 195.6

-

-

-

-

-

-

-

-

-

-

227.6 227.1 238.0 178.6

231.1 231.1 238.0 223.4

229.5 156.9

229.6 207.4

229.1 228.7

-

-

-

-

-

-

90 252.9 252.9 253.0 253.0 262.4 249.9 243.8 243.8 243.9 243.9 251.0 246.1

233.9 233.9

75 229.3 228.7 251.0 173.2 263.2 99.2 221.2 220.7 241.0 169.4 250.7 95.1 213.2 212.8 230.8 165.7

80 235.2 235.2 250.9 229.2 263.6 156.2 228.2 228.2 240.9 225.5 251.4 152.2 220.9 220.9 230.7 221.7

85 247.3 247.3 250.1 249.6 263.9 212.8 239.1 239.1 240.3 240.0 251.7 208.8 230.3 230.3 230.4 230.4

90 256.6 256.6 256.7 256.7 263.7 262.7 246.2 246.2 246.3 246.3 251.6 250.6 236.1 236.1 236.2 236.2

-

-

-

-

-

-

-

-

-

-

11000

75 230.8 230.4 252.4 182.0 264.0 101.1 222.7 222.3 242.1 178.2 251.2 97.0 214.6 214.1

80 239.4 239.4 252.2 243.6 264.7 163.8 232.0 232.0 242.0 238.9 252.1 159.8 224.1 224.1

85 251.0 251.0 251.7 251.3 264.9 226.1 242.1 242.1 242.2 242.2 252.4 222.0 232.5 232.5

90 258.7 258.7 258.8 258.8 264.6 263.8 248.7 248.7 248.8 248.8 252.1 251.4 237.7 237.7

-

-

-

-

-

-

-

-

-

-

-

-

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Stands for both downflow and horizontal unit.

-

-

-

-

46 RT-PRC043AC-EN

Performance Data

Table 24. Gross cooling capacities 12½ tons three phase high efficiency T/YH*150G3,4,W (stage 1)

Air

Flow cfm

Ent

DB

(°F)

Ambient Temperature

85 95

Entering Wet Bulb

61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2000

2500

3000

3500

4000

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

42.0 39.3 45.3 31.2 49.8 15.0 39.2 37.2 42.3 29.4 46.7 13.6

44.2 43.5 46.2 39.1 50.3 29.0 41.5 41.2 43.3 37.1 47.2 27.2

46.9 46.6 48.0 44.3 50.7 38.0 44.1 44.1 45.1 42.1 47.6 36.1

49.6 49.3 50.4 48.1 52.2 44.1 46.9 46.8 47.5 45.8 49.1 42.1

43.3 41.5 46.2 33.6 50.4 17.5 40.4 39.2 43.1 31.6 47.1 15.9

45.7 45.7 47.4 41.6 51.1 31.5 42.8 42.8 44.3 39.3 47.9 29.6

48.5 48.5 49.5 46.9 51.8 40.7 45.6 45.6 46.4 44.6 48.6 38.6

51.5 51.5 52.0 50.9 53.5 47.0 48.5 48.5 48.9 48.4 50.3 44.7

44.4 43.3 46.9 35.5 50.8 19.5 41.3 40.8 43.7 33.3 47.3 17.7

47.0 47.0 48.4 43.6 51.7 33.6 44.0 44.0 45.1 41.2 48.3 31.6

50.0 50.0 50.6 49.1 52.7 42.9 46.9 46.9 47.4 46.5 49.3 40.6

53.0 53.0 53.3 53.2 54.6 49.3 49.9 49.9 50.1 50.1 51.2 46.9

45.2 44.7 47.4 37.0 50.9 21.1 42.0 42.0 44.0 34.6 47.7 19.1

48.1 48.1 49.1 45.2 52.1 35.3 44.8 44.8 45.7 42.6 48.5 33.0

51.2 51.2 51.6 50.8 53.3 44.7 48.1 47.9 48.2 48.0 49.8 42.2

54.3 54.3 54.4 54.4 55.4 51.3 50.6 50.6 51.0 51.0 51.9 48.6

45.8 45.6 47.6 38.0 51.3 22.3 42.4 42.4 44.3 35.4 48.4 20.0

48.9 48.9 49.6 46.3 52.2 36.6 45.5 45.5 46.0 43.5 48.7 34.1

52.1 52.1 52.3 52.1 53.7 46.1 48.6 48.6 48.7 48.7 50.0 43.4

54.8 54.8 55.2 55.2 56.0 52.8 51.2 51.2 51.7 51.7 52.3 49.9

4375

75

80

85

90

46.1 46.0 47.6 38.5 51.9 22.8 42.6 42.6 44.6 35.8 48.7 20.5

49.3 49.3 49.8 46.9 52.4 37.2 45.8 45.8 46.1 43.9 48.9 34.6

52.3 52.3 52.6 52.6 53.9 46.8 48.8 48.8 49.0 49.0 50.3 44.0

55.2 55.2 55.7 55.7 56.3 53.6 52.0 52.0 52.1 52.1 52.5 50.6

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

RT-PRC043AC-EN 47

Performance Data

Table 25. Gross cooling capacities 12½ tons three phase high efficiency T/YH*150G3,4,W (stage 2)

Air

Flow cfm

Ent

DB

(°F)

Ambient Temperature

85 95

Entering Wet Bulb

61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2000

2500

3000

3500

4000

75

80

85

90

87.1 69.1 97.7 56.8 108.4 33.8 83.2 66.7 92.6 54.8 102.7 32.4

88.4 76.3 98.3 68.1 110.1 52.4 84.5 73.5 93.8 65.7 104.8 50.5

91.0 81.9 99.1 76.1 110.6 65.0 87.1 78.9 94.7 73.5 105.5 62.7

94.6 86.6 101.5 82.3 111.0 73.9 90.6 83.5 97.0 79.4 106.0 71.4

75

80

92.4 75.4 101.4 62.0 112.8 37.9 88.1 72.7 96.9 59.7 105.9 36.2

94.3 83.2 103.5 74.1 114.0 57.5 90.1 80.3 98.7 71.6 109.8 55.3

85 97.5 89.5 105.0 83.0 115.8 71.0 93.3 86.3 100.2 80.1 110.4 68.5

90 101.5 94.7 107.9 89.7 116.8 80.7 97.3 91.3 103.2 86.6 111.5 77.9

75

80

96.8 80.9 107.7 66.4 114.3 41.2 92.3 78.0 102.4 64.0 113.2 39.3

99.4 89.5 107.8 79.5 118.5 61.9 94.9 86.3 102.7 76.7 114.1 59.5

85 103.1 96.3 110.0 89.1 120.1 76.2 98.6 92.9 105.0 86.0 114.4 73.5

90 107.6 102.0 113.5 96.4 121.8 86.7 103.1 98.4 108.5 93.1 116.2 83.7

75 100.3 85.7 110.4 70.2 120.2 43.8 95.6 82.5 104.8 67.5 115.7 41.7

80 103.6 95.0 111.4 84.2 123.3 65.5 98.9 91.6 106.0 81.1 117.2 62.9

85 107.9 102.4 114.2 94.5 123.6 80.8 103.2 98.8 108.9 91.1 117.7 77.8

90 112.9 108.7 118.3 102.4 126.0 92.0 108.1 104.9 112.9 98.9 120.1 88.7

75 103.1 89.8 112.3 73.3 121.4 45.7 98.0 86.4 106.5 70.4 116.8 43.3

80 107.0 99.8 114.1 88.1 125.2 68.5 102.0 96.2 108.4 84.9 118.8 65.7

85 111.9 107.9 117.5 99.1 126.3 84.6 106.9 104.0 112.0 95.6 120.0 81.5

90 117.4 114.6 122.2 107.7 129.3 96.5 112.3 110.6 116.6 103.9 123.2 93.1

4375

75 104.6 92.4 113.2 75.1 122.6 46.7 99.3 88.8 107.1 72.0 117.4 44.1

80 109.0 103.0 115.5 90.6 126.1 70.3 103.8 99.1 109.7 87.2 119.4 67.3

85 114.3 111.5 119.5 102.2 127.7 87.1 109.1 107.4 113.7 98.5 121.3 83.7

90 120.1 118.6 124.6 111.2 131.3 99.5 114.8 114.4 118.8 107.3 124.9 95.9

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

48 RT-PRC043AC-EN

Performance Data

Table 26. Gross cooling capacities 12½ tons three phase high efficiency T/YH*150G3,4,W (full load)

Air

Flow cfm

2500

3000

3500

4000

4500

5000

5500

6000

Ent

DB

(°F)

85

Ambient Temperature

95 105

Entering Wet Bulb

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 125.0 96.9 138.0 75.5 153.6 38.3 118.3 92.7 130.4 72.3 145.1 36.2 111.1 88.1 122.3 68.7 136.2 33.8

80 127.7 109.0 139.6 94.4 154.2 68.6 121.0 104.1 132.0 90.4 145.7 65.6 113.8 98.9 123.9 86.0 136.7 62.2

85 132.0 118.4 141.2 108.0 154.7 89.5 125.1 113.0 133.5 103.4 146.2 85.7 117.8 107.3 125.5 98.4 137.2 81.5

90 137.2 126.3 144.6 118.4 155.2 104.6 130.0 120.5 136.8 113.3 146.7 100.1 122.5 114.3 128.6 107.7 137.8 95.3

75 131.2 104.5 143.4 82.5 158.2 44.6 124.1 99.9 135.4 78.9 149.3 42.1 116.5 94.9 126.9 74.9 140.0 39.3

80 134.4 117.1 145.5 102.0 159.3 75.6 127.3 111.8 137.5 97.6 150.4 72.2 119.7 106.2 129.0 92.9 141.0 68.4

85 139.1 127.0 147.6 116.2 160.4 97.2 131.8 121.2 139.6 111.1 151.4 93.0 124.1 115.1 131.1 105.7 142.1 88.4

90 144.6 135.3 151.5 127.1 161.4 112.8 137.1 129.1 143.3 121.5 152.5 107.9 129.1 122.5 134.6 115.6 143.1 102.7

75 136.7 111.4 148.1 88.8 162.1 50.2 129.2 106.4 142.1 84.8 152.8 47.4 121.2 101.0 133.1 80.4 143.1 44.2

80 140.5 124.5 150.7 108.9 163.7 82.0 132.9 118.8 142.3 104.1 154.4 78.2 124.9 112.8 133.4 99.0 144.6 74.0

85 145.6 134.9 153.4 123.6 165.3 104.2 137.8 128.7 144.9 118.2 156.0 99.5 129.7 122.2 136.0 112.4 146.2 94.6

90 151.4 143.6 157.6 135.0 166.9 120.3 143.4 137.0 149.0 129.0 157.6 115.1 135.0 130.0 140.0 122.7 147.8 109.5

75 141.5 117.6 154.6 94.4 165.3 55.2 133.5 112.2 145.6 90.0 155.6 51.9 125.1 106.4 136.1 85.3 145.4 48.3

80 145.8 131.3 155.2 115.2 167.4 87.7 137.8 125.2 146.4 110.0 157.7 83.4 129.4 118.8 137.0 104.5 147.5 78.9

85 151.3 142.1 158.4 130.4 169.6 110.5 143.2 135.5 149.5 124.6 159.8 105.5 134.6 128.6 140.2 118.4 149.6 100.1

90 157.4 151.2 163.1 142.3 171.7 127.2 149.1 144.2 154.0 135.9 161.9 121.5 140.2 136.9 144.6 129.2 151.7 115.5

75 145.6 123.2 157.7 99.4 173.0 59.4 137.2 117.4 148.3 94.6 162.6 55.8 128.4 111.2 138.4 89.4 151.7 51.8

80 150.4 137.3 159.0 120.8 173.0 92.7 142.0 130.9 149.7 115.2 162.7 88.1 133.2 124.1 140.0 109.3 152.0 83.1

85 156.3 148.7 162.7 136.6 173.1 116.1 147.8 141.7 153.4 130.3 162.9 110.7 138.8 134.4 143.7 123.7 152.3 105.0

90 162.8 158.2 167.8 148.9 175.8 133.4 154.0 150.8 158.4 142.1 165.6 127.3 144.7 143.1 148.5 135.0 155.0 120.9

75 149.0 128.0 160.1 103.7 174.5 63.1 140.2 121.8 150.2 98.5 163.6 59.0 130.9 115.3 139.9 92.9 152.3 54.6

80 154.3 142.8 162.1 125.7 175.2 97.0 145.5 135.9 152.4 119.7 164.5 92.0 136.2 128.7 142.2 113.4 153.3 86.7

85 160.6 154.5 166.3 142.0 175.9 121.1 151.6 147.2 156.6 135.4 165.3 115.3 142.2 139.5 146.5 128.4 154.3 109.1

90 167.4 164.5 171.8 154.8 179.1 138.9 158.2 156.7 162.0 147.6 168.5 132.4 148.5 148.5 151.7 140.1 157.5 125.6

75 151.6 132.3 161.8 107.3 175.2 66.0 142.4 125.7 151.5 101.7 164.0 61.5 132.7 118.7 140.8 95.8 152.8 56.8

80 157.5 147.5 164.5 129.9 176.6 100.7 148.2 140.3 154.3 123.6 165.5 95.3 138.6 132.7 143.8 116.8 153.9 89.5

85 164.2 159.7 169.2 146.8 178.0 125.4 154.8 152.0 159.1 139.8 167.0 119.2 145.0 143.9 148.5 132.4 155.6 112.6

90 171.3 170.1 175.1 160.0 181.8 143.7 161.7 161.7 164.9 152.5 170.7 136.9 151.6 151.6 154.2 144.6 159.3 129.7

75 153.6 135.8 162.8 110.2 175.3 68.2 143.9 128.8 152.1 104.2 164.5 63.4 133.8 121.5 140.9 97.9 153.2 58.2

80 160.0 151.6 166.1 133.5 177.4 103.7 150.3 144.0 155.6 126.7 165.8 97.9 140.2 136.0 144.6 119.6 154.5 91.7

85 167.1 164.3 171.4 150.9 179.4 129.0 157.3 156.1 160.9 143.5 168.0 122.4 147.0 147.0 149.9 135.7 156.2 115.5

90 174.5 174.5 177.7 164.6 183.7 147.9 164.4 164.4 167.1 156.7 172.3 140.6 154.0 154.0 155.9 148.4 160.4 133.1

RT-PRC043AC-EN 49

Performance Data

Table 26. Gross cooling capacities 12½ tons three phase high efficiency T/YH*150G3,4,W (full load)

Air

Flow cfm

2500

Ent

DB

(°F)

115

Ambient Temperature

120 125

61 67 73 61

Entering Wet Bulb

67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 103.5 83.2 113.8 64.9 126.9 31.1 99.5 80.7 109.4 62.8 122.0 29.6 95.5 78.0 104.9 60.6 117.0 28.0

80 106.2 93.3 115.4 81.4 127.4 58.5 102.2 90.4 110.9 78.9 122.5 56.5 98.1 87.5 106.4 76.4 117.5 54.4

85 110.0 101.2 116.9 93.0 127.9 77.0 105.9 98.1 112.5 90.3 123.0 74.7 101.8 94.8 107.9 87.4 118.0 72.2

90 114.5 107.9 119.9 101.9 128.4 90.2 110.3 104.5 115.4 98.8 123.5 87.5 106.0 101.1 110.8 95.7 118.5 84.7

75 108.5 89.6 118.0 70.6 130.2 36.2 104.3 86.8 113.3 68.4 125.1 34.5 100.0 84.0 108.6 66.0 120.0 32.7

3000

3500

4000

4500

5000

80 111.7 100.3 120.0 87.8 131.2 64.3 107.5 97.2 115.4 85.1 126.2 62.1 103.2 94.0 110.7 82.4 121.0 59.9

85 115.9 108.6 122.1 100.0 132.3 83.5 111.6 105.3 117.5 97.0 127.2 80.9 107.3 101.8 112.7 94.0 122.0 78.3

90 120.7 115.7 125.5 109.3 133.3 97.2 116.3 112.1 120.8 106.1 128.2 94.3 111.8 108.5 116.0 102.7 123.1 91.3

75 112.7 95.3 123.6 75.8 132.9 40.6 108.3 92.4 118.7 73.3 127.6 38.7 103.8 89.3 113.7 70.8 122.2 36.8

80 116.4 106.5 124.0 93.5 134.4 69.5 112.0 103.2 119.2 90.7 129.1 67.1 107.5 99.8 114.2 87.7 123.8 64.7

85 121.1 115.3 126.6 106.3 136.0 89.3 116.6 111.8 121.8 103.1 130.7 86.5 112.0 108.2 116.8 99.8 125.3 83.7

90 126.2 122.8 130.5 116.1 137.6 103.5 121.6 119.0 125.5 112.6 132.3 100.4 116.9 115.2 120.5 109.1 126.9 97.3

75 116.3 100.4 126.2 80.2 134.8 44.4 111.7 97.2 121.0 77.5 129.3 42.3 107.0 94.0 115.8 74.8 123.7 40.1

80 120.5 112.1 127.3 98.6 136.9 74.0 115.9 108.6 122.2 95.5 131.4 71.4 111.2 105.0 117.1 92.4 125.8 68.8

85 125.6 121.4 130.4 111.9 139.0 94.4 120.9 117.6 125.4 108.5 133.5 91.5 116.1 113.8 120.2 105.1 127.9 88.4

90 131.0 129.2 134.7 122.1 141.1 109.2 126.2 125.3 129.5 118.5 135.6 105.9 121.3 121.2 124.3 114.8 130.0 102.5

75 119.1 104.7 128.0 84.0 140.3 47.5 114.3 101.4 122.7 81.1 134.5 45.2 109.4 97.9 117.3 78.2 128.6 42.8

80 123.9 117.0 129.8 103.0 140.8 77.8 119.0 113.3 124.5 99.7 135.0 75.1 114.1 109.6 119.2 96.4 129.2 72.2

85 129.3 126.7 133.5 116.8 141.3 98.9 124.4 122.8 128.2 113.3 135.6 95.7 119.4 118.8 122.8 109.6 129.8 92.5

90 135.1 135.0 138.1 127.6 143.9 114.2 130.0 130.0 132.8 123.7 138.2 110.7 124.9 124.9 127.4 119.8 132.4 107.1

75 121.2 108.4 129.2 87.1 140.6 49.9 116.2 104.9 123.6 84.0 134.5 47.4 111.1 101.2 118.0 80.9 129.0 44.9

80 126.5 121.2 131.6 106.7 141.7 81.0 121.5 117.4 126.2 103.3 135.7 78.0 116.4 113.4 120.6 99.7 129.6 75.0

85 132.4 131.4 135.8 121.1 142.8 102.7 127.3 127.3 130.4 117.3 136.9 99.3 122.1 122.1 124.8 113.5 130.9 95.9

90 138.4 138.4 140.9 132.3 146.0 118.5 133.2 133.2 135.4 128.3 140.1 114.8 127.9 127.9 129.7 124.1 134.1 111.1

75 122.6 111.5 129.6 89.5 141.0 51.7 117.4 107.7 123.9 86.3 134.8 49.0 112.1 103.9 118.0 82.9 130.0 46.2

5500

80 128.4 124.8 132.7 109.8 141.9 83.5 123.2 120.7 127.1 106.1 136.2 80.3 117.9 116.6 121.3 102.4 130.7 77.1

85 134.7 134.7 137.5 124.7 143.7 105.8 129.4 129.4 131.8 120.7 137.6 102.2 124.0 124.0 126.0 116.7 131.4 98.6

90 141.1 141.1 143.0 136.4 147.4 122.2 135.7 135.7 137.2 132.1 141.3 118.3 130.1 130.1 131.4 127.8 135.1 114.3

75 123.3 113.8 130.0 91.3 142.0 52.7 117.9 109.9 125.0 87.8 135.3 49.9 112.3 105.8 119.0 84.3 130.2 46.9

6000

80 129.7 127.7 133.2 112.2 143.0 85.3 124.2 123.4 127.3 108.3 137.0 81.9 118.7 118.7 124.0 104.4 131.6 78.5

85 136.4 136.4 138.4 127.6 143.8 108.2 130.8 130.8 132.5 123.5 139.0 104.5 125.2 125.2 126.5 119.2 133.0 100.6

90 143.0 143.0 144.3 139.8 148.1 125.2 137.4 137.4 138.4 135.3 141.8 121.1 131.6 131.6 132.3 130.8 135.3 116.9

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

50 RT-PRC043AC-EN

Performance Data

Table 27. Gross cooling capacities 12½ tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD150G3,4,W (Digit 22 = B)

Air

Flow cfm

2500 (a)

3250

(a)

4000

4500

5000

5500

6000

Ent

DB

(°F)

85

Ambient Temperature

95 105

61 67 73 61

Entering Wet Bulb

67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 119.6 86.9 135.0 60.0 154.5 54.1 112.4 82.4 127.1 56.5 145.9 51.1 104.7 77.6 118.6 52.7 136.8 47.9

80 121.1 102.6 134.0 82.6 151.3 52.9 114.0 97.4 126.2 78.4 142.8 50.0 106.3 92.0 117.9 74.0 133.7 46.8

85 123.7 114.7 134.3 101.6 149.2 75.1 116.7 108.9 126.6 96.8 140.8 71.4 109.2 102.8 118.4 91.7 131.9 67.4

90 127.5 123.2 135.8 116.9 148.3 97.4 120.6 116.7 128.2 111.5 140.0 93.0 113.2 110.0 120.1 105.8 131.2 88.4

75 129.1 96.7 143.2 68.4 161.5 56.5 121.5 91.9 134.9 64.6 152.5 53.4 113.3 86.8 126.0 60.5 142.9 50.0

80 131.4 113.6 143.2 92.1 159.1 57.4 123.9 108.1 134.9 87.7 150.2 54.0 115.8 102.4 126.1 83.0 140.7 50.4

85 134.9 126.9 144.3 112.3 157.9 84.4 127.5 120.8 136.2 107.2 149.1 80.4 119.5 114.4 127.5 101.9 139.7 76.2

90 139.7 136.5 146.7 128.8 157.9 107.9 132.3 129.8 138.6 123.1 149.2 103.2 124.4 122.8 130.0 117.2 139.9 98.3

75 137.1 105.6 149.9 75.8 167.0 58.4 129.0 100.4 141.1 71.7 157.4 55.1 120.3 95.0 131.7 67.4 147.4 51.6

80 140.2 123.6 150.7 100.7 165.4 64.5 132.2 117.8 142.0 96.0 156.0 60.9 123.7 111.8 132.7 91.0 146.1 57.0

85 144.6 138.0 152.7 122.0 165.1 92.7 136.7 131.6 144.1 116.7 155.8 88.5 128.3 124.9 135.0 111.1 145.9 83.9

90 150.2 148.8 156.0 139.7 166.0 117.4 142.4 141.8 147.5 133.7 156.8 112.4 134.0 134.0 138.4 127.5 147.0 107.2

75 141.5 110.9 153.5 80.1 169.7 59.4 133.1 105.5 144.3 75.9 159.9 56.0 124.1 100.0 134.7 71.3 149.5 52.3

80 145.2 129.7 154.9 105.8 168.8 68.7 136.9 123.7 145.8 100.9 159.0 64.9 128.1 117.5 136.3 95.8 148.8 60.8

85 150.2 144.9 157.5 127.9 169.0 97.7 142.0 138.3 148.6 122.4 159.4 93.2 133.2 131.4 139.1 116.6 149.2 88.5

90 156.3 156.3 161.3 146.4 170.5 123.1 148.2 148.2 152.5 140.3 161.0 118.0 139.6 139.6 143.1 133.8 150.9 112.6

75 145.2 115.7 156.3 84.0 171.8 60.1 136.5 110.2 146.9 79.6 161.6 56.6 127.2 104.5 137.0 74.9 151.0 52.8

80 149.5 135.3 158.3 110.5 171.4 72.5 140.9 129.2 149.0 105.4 161.4 68.4 131.7 122.8 139.1 100.1 150.8 64.2

85 155.0 151.3 161.5 133.4 172.2 102.3 146.5 144.5 152.3 127.7 162.3 97.6 137.5 137.5 142.5 121.7 151.8 92.7

90 161.8 161.8 165.9 152.7 174.3 128.4 153.4 153.4 156.8 146.3 164.4 123.1 144.4 144.4 147.1 139.7 154.1 117.6

75 148.2 120.1 158.5 87.5 173.1 60.6 139.2 114.4 148.8 82.9 162.7 56.9 129.6 108.5 138.5 78.0 151.7 53.1

80 153.1 140.5 161.1 114.8 173.3 75.8 144.2 134.2 151.4 109.5 163.0 71.6 134.7 127.6 141.3 104.0 152.1 67.1

85 159.2 157.2 164.8 138.4 174.7 106.3 150.4 150.3 155.3 132.5 164.5 101.5 141.0 141.0 145.3 126.3 153.7 96.4

90 166.5 166.5 169.8 158.5 177.3 133.3 157.8 157.8 160.4 151.9 167.2 127.8 148.6 148.6 150.4 145.1 156.6 122.0

75 150.5 124.1 160.0 90.5 173.7 60.8 141.2 118.2 150.0 85.7 163.0 57.1 131.3 112.1 139.4 80.6 151.7 53.1

80 156.0 145.2 163.1 118.6 174.5 78.6 146.8 138.7 153.2 113.1 163.9 74.2 137.0 131.9 142.7 107.4 152.7 69.6

85 162.7 162.7 167.5 143.0 176.5 110.0 153.6 153.6 157.6 136.9 166.0 104.9 143.9 143.9 147.3 130.5 154.9 99.6

90 170.6 170.6 173.0 163.8 179.7 137.7 161.5 161.5 163.3 157.1 169.3 132.0 152.0 152.0 153.0 150.1 158.3 126.1

RT-PRC043AC-EN 51

Performance Data

Table 27. Gross cooling capacities 12½ tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD150G3,4,W (Digit 22 = B)

Air

Flow cfm

Ent

DB

(°F)

115

Ambient Temperature

120 125

61 67 73 61

Entering Wet Bulb

67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 96.4 72.5 109.7 48.7 127.1 44.5 92.1 69.8 105.0 46.6 122.1 42.7 87.7 67.2 100.2 44.4 116.9 40.9

2500

3250

(a)

(a)

4000

4500

80 98.2 86.3 109.0 69.4 124.1 43.5 93.9 83.3 104.4 66.9 119.2 41.7 89.5 80.3 99.6 64.4 114.0 39.9

85 101.1 96.4 109.6 86.4 122.4 63.2 96.9 93.2 105.0 83.7 117.5 60.9 92.5 89.8 100.3 80.9 112.4 58.7

90 105.3 103.0 111.4 99.9 121.8 83.5 101.1 99.4 106.9 96.9 116.9 81.0 96.8 95.8 102.2 93.7 111.9 78.4

75 104.6 81.4 116.5 56.2 132.7 46.5 100.0 78.7 111.6 54.0 127.5 44.6 95.3 75.8 106.6 51.7 122.1 42.7

80 107.2 96.4 116.8 78.1 130.7 46.5 102.7 93.3 111.9 75.5 125.4 44.5 98.0 90.2 106.9 72.9 120.1 42.3

85 111.0 107.7 118.3 96.3 129.8 71.6 106.5 104.3 113.4 93.4 124.6 69.3 101.9 100.9 108.5 90.5 119.3 66.9

90 116.0 115.5 120.9 111.0 130.1 93.2 111.6 111.6 116.2 107.8 125.0 90.5 107.1 107.1 111.3 104.5 119.7 87.8

75 111.1 89.4 121.8 62.8 136.8 47.9 106.3 86.5 116.7 60.4 131.3 46.0 101.4 83.5 111.4 57.9 125.7 44.0

80 114.6 105.5 123.0 85.8 135.6 52.8 109.9 102.3 117.9 83.1 130.1 50.6 105.0 99.0 112.7 80.3 124.6 48.4

85 119.3 118.0 125.3 105.2 135.6 79.1 114.6 114.5 120.3 102.2 130.2 76.6 109.8 109.8 115.1 99.1 124.7 74.0

90 125.2 125.2 128.8 121.0 136.7 101.8 120.5 120.5 123.8 117.7 131.4 99.0 115.8 115.8 118.7 114.3 125.9 96.1

75 114.6 94.1 124.5 66.6 138.6 48.5 109.7 91.1 119.2 64.1 133.0 46.5 104.6 88.1 113.8 61.5 127.2 44.5

80 118.7 111.0 126.2 90.4 138.0 56.4 113.8 107.7 121.0 87.6 132.4 54.2 108.8 104.3 115.6 84.7 126.7 51.8

85 123.9 123.9 129.1 110.6 138.6 83.5 119.1 119.1 123.9 107.4 133.0 80.9 114.1 114.1 118.6 104.3 127.3 78.3

90 130.4 130.4 133.2 127.1 140.3 107.0 125.6 125.6 128.1 123.7 134.8 104.1 120.7 120.7 122.8 120.2 129.2 101.1

75 117.4 98.4 126.5 69.9 139.8 48.9 112.3 95.3 121.0 67.4 134.0 46.9 107.1 92.2 115.4 64.7 128.0 44.8

5000

5500

80 122.1 116.1 128.8 94.5 139.7 59.6 117.0 112.7 123.4 91.6 134.0 57.2 111.8 109.2 117.8 88.6 128.1 54.8

85 127.9 127.9 132.2 115.5 140.8 87.5 122.9 122.9 126.9 112.3 135.1 84.8 117.8 117.8 121.4 109.0 129.3 82.0

90 134.9 134.9 136.9 132.8 143.2 111.7 130.0 130.0 131.6 129.3 137.5 108.7 125.0 125.0 126.2 125.7 131.8 105.7

75 119.5 102.3 127.7 72.8 140.2 49.1 114.3 99.1 122.1 70.2 134.2 47.0 108.9 95.8 116.4 67.4 128.2 44.9

80 124.7 120.7 130.6 98.2 140.7 62.3 119.5 117.2 125.0 95.2 134.8 59.9 114.2 113.6 119.4 92.1 128.8 57.4

85 131.1 131.1 134.7 119.9 142.4 91.0 126.0 126.0 129.2 116.6 136.6 88.2 120.7 120.7 123.5 113.2 130.6 85.4

90 138.5 138.5 139.9 138.1 145.4 116.0 133.1 133.1 134.5 134.4 139.6 112.9 128.9 128.9 128.9 128.9 133.6 109.8

75 120.9 105.7 128.3 75.3 139.9 49.0 115.5 102.4 122.5 72.5 133.8 46.8 110.0 99.0 116.7 69.7 127.6 44.7

6000

80 126.7 124.9 131.7 101.4 141.0 64.6 121.4 121.3 126.0 98.3 135.0 62.1 115.9 115.9 120.2 95.2 128.8 59.5

85 133.7 133.7 136.4 123.9 143.3 94.1 128.4 128.4 130.7 120.5 137.3 91.2 123.0 123.0 125.0 117.1 131.2 88.2

90 142.2 142.2 142.2 142.2 146.8 119.9 136.6 136.6 136.6 136.6 140.9 116.7 130.9 130.9 130.9 130.9 134.8 113.4

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

(a)For 2500 and 3250 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Dehumidification (Hot Gas Reheat) with Frostat and Crankcage heaters are required on applications below 320 cfm/ton.

- Multi-speed or single zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

52 RT-PRC043AC-EN

Performance Data

Table 28. Gross cooling capacities 15 tons three phase high efficiency T/YH*180G3,4,W (stage 1)

Air

Flow cfm

Ent

DB

(°F)

Ambient Temperature

85 95

Entering Wet Bulb

61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2400

3000

3600

4200

4800

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

54.8 51.5 59.2 40.6 65.3 18.6 51.8 49.1 56.0 38.5 60.9 17.0

57.4 56.8 60.0 50.8 65.5 37.2 54.3 54.2 56.8 48.5 62.1 35.2

60.3 60.3 61.9 57.4 65.5 48.8 57.1 57.1 58.6 54.8 62.1 46.6

63.3 63.3 64.3 61.8 66.8 56.5 60.1 60.1 61.0 59.1 63.3 54.1

56.6 54.6 60.5 44.0 66.3 22.4 53.4 52.0 57.1 41.7 61.6 20.5

59.5 59.5 61.7 54.3 66.7 40.9 56.2 56.2 58.2 51.8 63.1 38.7

62.6 62.6 63.8 60.9 67.1 52.6 59.3 59.3 60.4 58.2 63.4 50.2

65.7 65.7 66.4 65.5 68.6 60.4 62.3 62.3 62.9 62.6 64.9 57.7

58.1 57.2 61.5 46.8 66.9 25.5 54.7 54.3 57.9 44.3 62.0 23.4

61.2 61.2 63.0 57.2 67.5 44.0 57.8 57.8 59.4 54.4 63.8 41.6

64.5 64.5 65.4 63.9 68.2 55.8 61.0 61.0 61.8 60.9 64.4 53.1

67.9 67.9 68.3 68.3 70.0 63.7 64.3 64.3 64.6 64.6 66.2 60.7

59.3 59.1 62.2 49.1 67.0 28.1 55.7 55.7 58.4 46.3 62.1 25.7

62.6 62.6 64.0 59.5 68.1 46.6 59.0 59.0 60.2 56.4 64.1 43.9

66.2 66.2 66.7 66.3 69.1 58.4 62.5 62.5 62.9 62.9 65.1 55.5

69.7 69.7 69.7 69.7 71.2 66.3 64.6 64.6 65.9 65.9 67.2 63.2

60.1 60.1 62.5 50.7 67.1 30.0 56.4 56.4 58.6 47.7 62.7 27.4

63.7 63.7 64.7 61.1 68.3 48.5 59.9 59.9 60.7 57.9 64.1 45.6

67.5 67.5 67.6 67.6 69.6 60.4 63.6 63.6 63.6 63.6 65.5 57.3

69.8 69.8 70.9 70.9 72.0 68.5 65.9 65.9 66.8 66.8 67.8 65.1

5250

75

80

85

90

60.5 60.5 62.5 51.6 67.2 31.1 56.6 56.6 58.8 48.4 63.0 28.4

64.3 64.3 65.0 62.0 68.5 49.6 60.4 60.4 60.9 58.6 64.1 46.5

67.8 67.8 68.1 68.1 69.8 61.6 63.8 63.8 64.0 64.0 65.5 58.2

70.7 70.7 71.5 71.5 72.4 69.6 66.7 66.7 67.4 67.4 68.0 66.1

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

RT-PRC043AC-EN 53

Performance Data

Table 29. Gross cooling capacities 15 tons three phase high efficiency T/YH*180G3,4,W (stage 2)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2400

3000

3600

4200

4800

75 102.0 81.9 111.7 65.6 123.0 36.1 96.8 78.4 105.8 62.6 116.0 33.6

80 104.0 90.7 113.0 79.9 123.8 59.7 98.9 86.9 107.3 76.5 117.7 56.7

85 107.1 97.4 114.3 89.8 124.6 75.5 102.0 93.4 108.8 86.1 118.5 72.1

90 111.0 102.8 117.0 97.1 125.4 86.5 105.8 98.6 111.5 93.2 119.3 82.9

75 107.2 88.8 117.9 71.7 126.6 41.1 101.7 85.0 111.7 68.3 120.0 38.3

80 109.8 98.2 118.0 86.6 128.0 65.6 104.4 94.1 112.0 82.9 121.5 62.3

85 113.4 105.4 120.0 97.2 129.4 82.2 108.0 101.1 114.1 93.2 123.0 78.5

90 117.8 111.3 123.2 105.1 130.8 93.9 112.3 106.7 117.3 100.8 124.5 89.9

75 111.5 94.8 121.2 76.7 133.1 45.2 105.7 90.6 114.7 73.0 125.9 42.1

80 114.7 104.8 122.0 92.5 133.2 70.6 109.0 100.4 115.7 88.4 126.2 67.0

85 118.9 112.5 124.7 103.7 133.3 87.9 113.2 107.9 118.5 99.3 126.5 84.0

90 123.7 118.9 128.4 112.1 135.3 100.3 117.8 114.0 122.2 107.5 128.7 96.0

75 114.9 99.8 123.6 80.9 134.5 48.4 108.8 95.3 116.8 76.9 127.0 44.9

80 118.8 110.4 125.2 97.4 135.4 74.7 112.7 105.7 118.6 93.0 128.1 70.7

85 123.5 118.7 128.5 109.2 136.3 92.8 117.4 113.7 122.0 104.6 129.2 88.5

90 128.6 125.5 132.8 118.2 139.0 105.7 122.5 120.3 126.3 113.2 132.0 101.1

75 117.4 103.9 125.1 84.1 135.0 50.6 111.0 99.1 117.9 79.7 128.0 46.8

80 121.9 115.2 127.5 101.4 136.7 77.8 115.6 110.1 120.6 96.7 129.1 73.5

85 127.1 123.9 131.5 113.9 138.4 96.7 120.8 118.6 124.6 108.8 131.0 92.0

90 132.7 131.1 136.3 123.3 141.8 110.3 126.3 125.6 129.4 118.1 134.5 105.3

5250

75 118.7 106.3 125.6 85.9 135.5 51.7 112.0 101.3 118.2 81.3 129.0 47.6

80 123.7 118.1 128.7 103.7 137.1 79.5 117.1 112.7 121.5 98.8 129.3 75.0

85 129.3 127.3 133.1 116.7 139.4 99.0 122.7 121.7 126.0 111.4 131.8 94.1

90 135.2 134.8 138.3 126.6 143.3 113.0 128.5 128.5 131.2 121.1 135.7 107.9

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 2400, 3000, 3600, and 4200 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

54 RT-PRC043AC-EN

Performance Data

Table 30. Gross cooling capacities 15 tons three phase high efficiency T/YH*180G3,4,W (full load)

Air

Flow cfm (a)

3000

3600

4200

4800

5400

6000

6600

7200

Ent

DB

(°F)

85

Ambient Temperature

95 105

Entering Wet Bulb

61 67 73 61 67 73 61 67 73

MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 149.8 116.6 163.9 91.6 180.9 48.7 142.5 112.1 155.7 88.3 172.0 46.6 134.3 106.9 146.7 84.2 162.1 43.8

80 153.0 130.6 165.9 113.6 181.8 83.7 145.7 125.4 157.8 109.4 172.9 80.6 137.5 119.5 148.7 104.5 163.1 76.8

85 157.9 141.6 167.9 129.4 182.8 108.0 150.5 135.8 159.8 124.5 173.8 104.0 142.2 129.4 150.8 118.9 164.0 99.3

90 163.8 150.7 171.9 141.5 183.7 125.5 156.2 144.5 163.7 136.0 174.7 120.8 147.7 137.7 154.6 129.9 164.9 115.5

75 156.6 125.2 169.8 99.5 186.1 55.7 148.9 120.2 161.3 95.7 176.7 53.2 140.3 114.6 151.8 91.2 166.5 50.1

80 160.4 139.8 172.4 122.2 187.5 91.6 152.7 134.2 163.9 117.5 178.2 88.1 144.1 127.9 154.4 112.2 168.0 83.9

85 165.7 151.3 175.0 138.6 189.0 116.6 157.9 145.1 166.5 133.2 179.7 112.2 149.2 138.3 157.0 127.2 169.4 107.1

90 172.0 160.9 179.5 151.2 190.5 134.7 163.9 154.2 170.8 145.3 181.2 129.6 155.0 147.0 161.3 138.7 170.9 123.8

75 162.6 133.0 177.9 106.6 190.4 62.0 154.5 127.6 168.8 102.4 180.7 59.1 145.5 121.6 158.9 97.5 170.0 55.5

80 166.9 148.2 178.1 129.9 192.5 98.7 158.8 142.1 169.2 124.9 182.7 94.8 149.8 135.4 159.4 119.1 172.1 90.1

85 172.7 160.2 181.3 147.0 194.5 124.4 164.5 153.6 172.3 141.2 184.8 119.5 155.4 146.3 162.5 134.8 174.1 114.1

90 179.3 170.2 186.2 160.1 196.6 143.1 170.9 163.1 177.2 153.8 186.8 137.6 161.6 155.5 167.2 146.8 176.2 131.4

75 167.9 139.9 182.2 112.8 194.0 67.4 159.3 134.2 172.7 108.2 183.8 64.1 149.9 127.7 162.3 102.9 172.8 60.2

80 172.7 155.7 183.1 136.9 196.6 105.0 164.2 149.3 173.7 131.4 186.5 100.6 154.8 142.2 163.5 125.3 175.4 95.6

85 179.0 168.2 186.8 154.5 199.2 131.4 170.3 161.2 177.5 148.4 189.1 126.1 160.8 153.6 167.2 141.5 178.0 120.2

90 185.9 178.7 192.2 168.2 201.9 150.7 177.1 171.3 182.7 161.4 191.7 144.7 167.3 163.2 172.4 154.0 180.7 138.2

75 172.3 146.1 185.6 118.3 202.7 72.1 163.4 139.9 175.7 113.3 191.8 68.4 153.6 133.1 164.9 107.6 180.1 64.0

80 177.8 162.5 187.3 143.1 202.9 110.5 168.8 155.6 177.5 137.2 192.2 105.7 159.0 148.1 166.9 130.6 180.6 100.3

85 184.4 175.5 191.6 161.3 203.2 137.6 175.4 168.1 181.8 154.7 192.6 131.9 165.5 160.0 171.2 147.5 181.2 125.6

90 191.7 186.4 197.4 175.5 206.4 157.5 182.5 178.6 187.5 168.3 195.8 151.1 172.3 170.1 176.8 160.5 184.4 144.1

75 176.0 151.5 188.3 123.0 204.4 76.0 166.7 144.9 178.0 117.5 193.1 71.9 156.5 137.6 166.8 111.4 181.0 67.1

80 182.0 168.5 190.7 148.5 205.4 115.2 172.7 161.2 180.5 142.2 194.3 110.0 162.5 153.3 169.5 135.2 182.3 104.1

85 189.1 182.0 195.5 167.3 206.3 143.0 179.7 174.2 185.4 160.3 195.4 136.9 169.3 165.7 174.3 152.6 183.5 130.2

90 196.8 193.3 201.8 181.9 210.1 163.5 187.1 185.1 191.5 174.4 199.1 156.7 176.6 176.2 180.4 166.2 187.3 149.3

75 178.9 156.1 190.2 126.9 205.4 79.1 169.2 149.1 179.5 121.0 193.7 74.5 158.6 141.4 167.9 114.5 181.2 69.3

80 185.5 173.7 193.3 153.1 207.0 119.1 175.7 166.0 182.7 146.3 195.5 113.5 165.1 157.6 171.3 139.0 183.1 107.2

85 193.0 187.7 198.7 172.5 208.7 147.6 183.2 179.5 188.2 165.1 197.3 141.1 172.4 170.6 176.7 157.0 185.1 134.0

90 201.0 199.5 205.5 187.6 213.0 168.7 190.9 190.8 194.8 179.7 201.7 161.5 180.0 180.0 183.2 171.1 189.4 153.7

75 181.0 159.9 191.4 130.0 205.6 81.4 170.9 152.5 180.3 123.7 194.3 76.4 159.9 144.4 168.3 116.8 181.3 70.8

80 188.2 178.1 195.2 156.8 207.9 122.2 178.0 170.0 184.2 149.7 196.0 116.2 167.0 161.2 172.3 141.9 183.2 109.5

85 196.1 192.6 201.1 176.9 210.3 151.4 185.9 184.0 190.2 169.0 198.5 144.5 174.7 174.6 178.3 160.6 185.9 137.0

90 204.5 204.5 208.3 192.5 215.2 173.1 194.0 194.0 197.2 184.2 203.4 165.5 182.7 182.7 185.3 175.1 190.8 157.3

RT-PRC043AC-EN 55

Performance Data

Table 30. Gross cooling capacities 15 tons three phase high efficiency T/YH*180G3,4,W (full load)

Air

Flow cfm

(a)

3000

115

Ambient Temperature

120 125

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 125.3 101.0 136.8 79.5 151.4 40.4 120.4 97.8 131.5 76.9 145.7 38.5 115.3 94.5 126.0 74.1 139.8 36.4

80 128.5 113.0 138.8 98.9 152.4 72.3 123.6 109.5 133.6 95.9 146.7 69.9 118.5 105.8 128.1 92.7 140.8 67.2

85 133.0 122.3 140.9 112.6 153.3 94.0 128.1 118.5 135.6 109.3 147.6 91.1 122.9 114.6 130.1 105.7 141.7 88.1

90 138.3 130.2 144.6 123.1 154.2 109.5 133.3 126.2 139.2 119.4 148.5 106.2 128.0 122.0 133.7 115.6 142.6 102.8

75 130.9 108.3 141.5 86.1 155.4 46.3 125.8 105.0 138.6 83.3 149.5 44.1 120.5 101.4 132.9 80.4 143.4 41.8

3600

4200

4800

5400

6000

80 134.6 120.9 144.1 106.2 156.8 79.0 129.5 117.2 138.7 103.0 151.0 76.3 124.3 113.3 133.0 99.6 144.9 73.5

85 139.6 130.8 146.7 120.6 158.3 101.4 134.5 126.8 141.3 117.0 152.5 98.3 129.1 122.6 135.6 113.3 146.4 95.0

90 145.2 139.0 150.9 131.5 159.8 117.4 140.0 134.8 145.3 127.7 153.9 113.9 134.5 130.5 139.6 123.6 147.9 110.3

75 135.7 114.9 148.0 92.0 158.5 51.3 130.4 111.3 142.2 88.9 152.4 48.9 124.9 107.5 136.3 85.8 146.1 46.4

80 140.0 128.0 148.7 112.7 160.6 84.8 134.7 124.1 143.0 109.3 154.5 82.0 129.2 120.0 137.1 105.7 148.2 78.9

85 145.4 138.4 151.8 127.7 162.6 107.9 140.1 134.2 146.1 123.9 156.5 104.6 134.5 129.8 140.2 120.0 150.2 101.1

90 151.4 147.1 156.4 139.2 164.7 124.6 145.9 142.7 150.7 135.1 158.6 120.9 140.3 138.1 144.7 130.9 152.3 117.1

75 139.7 120.6 151.0 97.0 160.9 55.5 134.2 116.8 145.1 93.8 159.7 53.0 128.5 112.9 138.9 90.4 153.1 50.2

80 144.6 134.4 152.4 118.5 163.5 89.9 139.1 130.2 146.5 114.8 159.8 86.8 133.4 125.9 140.4 111.0 153.2 83.5

85 150.4 145.3 156.1 134.0 166.1 113.7 144.9 140.8 150.2 130.0 159.8 110.2 139.1 136.3 144.1 125.9 153.3 106.5

90 156.7 154.4 161.2 146.0 168.7 130.9 151.1 149.8 155.2 141.7 162.5 127.0 145.2 145.0 149.1 137.3 156.0 123.0

75 142.9 125.6 153.3 101.2 167.5 59.0 137.3 121.6 147.1 97.8 160.8 56.2 131.4 117.4 140.7 94.2 154.0 53.2

80 148.4 139.9 155.4 123.4 168.2 94.2 142.7 135.6 149.3 119.6 161.6 90.9 136.8 131.1 143.0 115.6 154.8 87.4

85 154.7 151.3 159.7 139.6 168.8 118.6 148.9 146.7 153.6 135.4 162.4 114.9 143.0 141.9 147.3 131.0 155.6 111.0

90 161.3 160.9 165.1 152.1 172.0 136.5 155.5 155.5 159.0 147.6 165.6 132.4 149.4 149.4 152.6 142.9 158.8 128.2

75 145.4 129.7 154.8 104.7 168.0 61.6 139.5 125.5 148.4 101.0 161.2 58.6 133.4 121.1 141.8 97.3 154.1 55.5

80 151.4 144.7 157.6 127.6 169.4 97.6 145.5 140.1 151.3 123.5 162.6 94.1 139.4 135.4 144.8 119.3 155.6 90.5

85 158.1 156.6 162.4 144.3 170.8 122.8 152.2 151.7 156.1 139.9 164.1 118.9 146.0 146.0 149.6 135.4 157.2 114.8

90 165.1 165.1 168.4 157.3 174.6 141.2 159.1 159.1 162.0 152.6 167.9 137.0 152.8 152.8 155.4 147.8 161.0 132.5

75 147.1 133.1 155.5 107.3 168.5 63.4 141.0 128.7 148.9 103.5 161.5 60.3 134.7 124.1 142.1 99.5 154.2 56.9

6600

80 153.6 148.6 159.0 130.9 169.9 100.3 147.6 143.9 152.5 126.7 162.9 96.6 141.3 138.9 145.8 122.2 155.7 92.7

85 160.8 160.8 164.4 148.3 172.0 126.2 154.7 154.7 157.9 143.7 165.1 122.0 148.3 148.3 151.2 138.9 158.0 117.7

90 168.2 168.2 170.8 161.8 176.3 145.2 161.9 161.9 164.2 156.9 169.4 140.7 155.5 155.5 157.5 151.8 162.3 136.1

75 148.0 135.6 156.1 109.2 169.1 64.5 141.7 131.0 149.4 105.1 161.8 61.1 135.2 126.2 142.4 100.9 154.4 57.5

7200

80 155.1 151.8 159.6 133.5 170.3 102.2 148.8 146.8 152.9 129.0 163.2 98.3 142.3 141.7 146.0 124.4 155.8 94.2

85 162.7 162.7 165.6 151.4 172.4 128.8 156.4 156.4 158.9 146.6 165.3 124.4 149.8 149.8 152.0 141.6 158.7 119.9

90 170.4 170.4 172.4 165.4 177.3 148.4 164.0 164.0 165.7 160.4 170.2 143.7 157.3 157.3 158.7 155.1 162.8 138.8

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 3000, 3600, and 4200 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Dehumidification (Hot Gas Reheat) with Frostat and Crankcage heaters are required on applications below 320 cfm/ton.

- Multi-speed or single zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

56 RT-PRC043AC-EN

Performance Data

Table 31. Gross cooling capacities 15 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD180G3,4,W (Digit 22 = B)

Air

Flow cfm (a)

3000

3900

4800

5400

6000

6600

7200

85

61

Ambient Temperature

95

Entering Wet Bulb

67 73

105

Ent

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 149.8 108.9 167.7 71.3 190.8 66.8 141.5 104.7 158.6 68.7 180.8 63.3 132.6 99.7 148.8 65.2 170.1 59.5

80 151.5 129.2 166.7 101.1 187.0 65.5 143.4 124.3 157.7 97.7 177.1 62.0 134.7 118.5 148.1 93.4 166.7 58.3

85 154.6 144.8 167.0 126.0 184.5 89.1 146.7 139.2 158.2 121.9 174.9 86.5 138.1 132.6 148.8 116.9 164.6 83.0

90 159.1 155.7 168.7 146.3 183.5 118.7 151.3 149.2 160.1 141.4 174.0 115.3 143.0 141.9 150.9 135.6 163.9 111.1

75 160.4 120.9 176.9 82.0 198.6 69.5 151.6 116.3 167.3 79.0 188.1 65.8 142.3 110.9 157.1 75.1 177.0 61.9

80 163.1 142.6 176.9 113.1 195.8 68.5 154.6 137.2 167.5 109.3 185.5 64.9 145.4 131.0 157.4 104.6 174.5 61.1

85 167.2 159.5 178.2 139.4 194.4 101.1 158.8 153.4 169.0 134.8 184.2 98.1 149.8 146.4 159.1 129.4 173.5 94.2

90 172.7 171.6 180.9 160.9 194.3 132.0 164.5 164.5 171.9 155.6 184.3 128.2 155.7 155.7 162.2 149.4 173.8 123.5

75 169.3 131.7 184.4 91.5 204.6 71.6 160.0 126.7 174.3 88.0 193.7 67.8 150.2 120.8 163.6 83.7 182.1 63.7

80 173.0 154.7 185.4 123.8 202.8 74.8 164.0 148.9 175.5 119.6 192.1 72.1 154.3 142.3 164.9 114.5 180.7 68.6

85 178.1 172.9 187.7 151.4 202.4 111.8 169.3 166.4 178.0 146.5 191.8 108.4 159.8 159.0 167.7 140.6 180.6 104.0

90 184.6 184.6 191.4 174.3 203.4 144.0 176.0 176.0 181.9 168.5 192.9 139.8 166.7 166.7 171.7 161.9 181.9 134.7

75 174.2 138.2 188.4 97.1 207.7 72.7 164.7 132.9 178.0 93.4 196.4 68.7 154.6 126.8 167.0 88.8 184.5 64.6

80 178.6 162.0 190.0 130.3 206.6 80.4 169.3 156.0 179.8 125.8 195.5 77.4 159.3 149.1 169.0 120.4 183.8 73.6

85 184.4 181.1 193.1 158.8 206.8 118.2 175.3 174.3 183.0 153.5 195.9 114.5 165.5 165.5 172.4 147.4 184.4 109.9

90 191.6 191.6 197.4 182.5 208.4 151.4 182.6 182.6 187.6 176.5 197.7 146.9 173.0 173.0 177.2 169.5 186.4 141.5

75 178.4 144.1 191.6 102.1 210.0 73.5 168.5 138.6 180.9 98.1 198.4 69.4 158.1 132.1 169.6 93.2 186.2 65.2

80 183.5 168.8 193.9 136.2 209.5 85.4 173.8 162.5 183.4 131.4 198.1 82.2 163.6 155.3 172.3 125.8 186.1 78.1

85 189.9 188.8 197.6 165.5 210.4 124.1 180.5 180.5 187.3 160.0 199.2 120.1 170.4 170.4 176.4 153.6 187.4 115.3

90 197.8 197.8 202.7 190.1 212.7 158.1 188.5 188.5 192.6 183.8 201.7 153.4 178.6 178.6 181.8 176.6 190.1 147.7

75 181.8 149.5 194.1 106.6 211.5 74.0 171.6 143.7 183.0 102.3 199.6 69.9 160.9 137.0 171.4 97.1 187.1 65.5

80 187.5 175.0 197.1 141.5 211.7 89.9 177.6 168.5 186.2 136.5 200.0 86.4 167.0 161.0 174.8 130.6 187.7 82.0

85 194.7 194.7 201.4 171.8 213.3 129.5 184.9 184.9 190.8 166.0 201.8 125.2 174.5 174.5 179.5 159.2 189.7 120.0

90 203.2 203.2 207.2 197.2 216.3 164.3 193.6 193.6 196.7 190.6 204.9 159.3 183.4 183.4 185.6 183.2 193.0 153.3

75 184.4 154.3 195.7 110.5 212.2 74.3 173.9 148.2 184.4 105.9 200.0 70.0 162.9 141.2 172.5 100.5 187.2 65.5

80 190.8 180.7 199.4 146.3 213.1 93.8 180.6 173.9 188.3 141.0 201.1 90.0 169.7 166.1 176.5 134.8 188.5 85.3

85 198.7 198.7 204.5 177.4 215.4 134.2 188.6 188.6 193.5 171.3 203.6 129.7 177.9 177.9 181.9 164.3 191.1 124.2

90 207.8 207.8 210.9 203.8 219.0 170.0 198.0 198.0 200.1 196.9 207.4 164.6 188.7 188.7 188.7 188.7 195.1 158.4

RT-PRC043AC-EN 57

Performance Data

Table 31. Gross cooling capacities 15 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD180G3,4,W (Digit 22 = B)

Air

Flow

cfm (a)

Ent

DB 61

115

67 73 61

Ambient Temperature

120

Entering Wet Bulb

67 73 61

125

67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

3000

3900

4800

5400

75 123.1 93.8 138.4 60.9 158.9 55.6 118.1 90.5 133.0 58.3 153.0 53.5 112.9 87.0 127.4 55.6 147.0 51.4

80 125.3 111.8 137.9 88.3 155.6 54.5 120.4 108.1 132.6 85.4 149.8 52.4 115.4 104.2 127.1 82.2 143.9 50.4

85 129.0 125.1 138.8 111.0 153.7 78.6 124.2 121.1 133.5 107.7 148.0 76.1 119.2 116.8 128.1 104.1 142.2 73.3

90 134.0 133.7 141.0 128.9 153.1 105.9 129.3 129.2 135.9 125.2 147.6 103.0 124.4 124.4 130.6 121.3 141.8 99.9

75 132.3 104.6 146.2 70.3 165.3 57.8 127.1 101.1 140.6 67.6 159.2 55.7 121.7 97.3 134.7 64.6 152.9 53.5

80 135.6 123.9 146.7 99.0 163.0 57.1 130.5 120.0 141.2 95.9 157.0 54.9 125.2 115.9 135.4 92.6 150.8 52.8

85 140.2 138.5 148.6 123.0 162.1 89.3 135.2 134.2 143.1 119.5 156.2 86.6 130.0 129.7 137.5 115.8 150.1 83.6

90 146.3 146.3 151.9 142.3 162.6 118.0 141.3 141.3 146.5 138.4 156.8 114.8 136.2 136.2 140.9 134.2 150.8 111.5

75 139.8 114.1 152.3 78.5 169.9 59.5 134.3 110.4 146.4 75.5 163.6 57.3 128.7 106.4 140.4 72.4 157.1 55.0

80 144.1 134.7 153.8 108.5 168.7 64.1 138.7 130.6 148.0 105.2 162.4 61.6 133.2 126.3 142.1 101.6 156.0 58.8

85 149.8 149.8 156.7 133.8 168.8 98.8 144.5 144.5 151.0 130.1 162.6 95.9 139.1 139.1 145.1 126.2 156.4 92.7

90 156.8 156.8 161.0 154.4 170.3 128.7 151.6 151.6 155.4 150.3 164.2 125.4 146.3 146.3 149.6 145.9 158.0 121.8

75 143.8 119.7 155.4 83.3 172.0 60.2 138.2 115.9 149.3 80.2 165.6 57.9 132.4 111.8 143.1 76.9 158.9 55.6

80 148.8 141.3 157.6 114.2 171.5 68.9 143.3 137.0 151.6 110.7 165.1 66.2 137.6 132.6 145.5 107.0 158.5 63.3

85 155.1 155.1 161.1 140.3 172.3 104.4 149.7 149.7 155.3 136.5 166.0 101.3 144.1 144.1 149.3 132.4 159.5 98.0

90 162.8 162.8 166.1 161.7 174.4 135.2 157.5 157.5 160.3 157.5 168.2 131.7 152.9 152.0 154.4 153.0 161.9 128.0

6000

6600

75 147.1 124.8 157.7 87.5 173.4 60.7 141.3 120.8 151.5 84.2 166.8 58.4 135.4 116.6 145.1 80.8 160.0 56.0

80 152.7 147.2 160.5 119.2 173.5 73.1 147.0 142.8 154.4 115.6 167.0 70.2 141.2 138.2 148.2 111.8 160.3 67.2

85 159.7 159.7 164.8 146.3 175.0 109.5 154.2 154.2 158.8 142.3 168.5 106.2 148.4 148.4 152.6 138.0 161.9 102.8

90 168.7 168.1 170.4 168.5 177.8 141.1 162.8 162.8 164.5 164.2 171.5 137.5 158.4 158.4 158.4 158.4 165.0 133.7

75 149.5 129.4 159.2 91.1 174.0 60.9 143.6 125.2 152.8 87.7 167.2 58.5 137.6 120.9 146.3 84.1 160.3 56.1

80 155.9 152.6 162.7 123.7 174.8 76.7 150.0 148.1 156.5 120.0 168.1 73.7 144.1 143.4 150.1 116.0 161.2 70.5

85 163.6 163.6 167.7 151.6 176.9 114.0 157.8 157.8 161.5 147.5 170.3 110.6 151.9 151.9 155.2 143.1 163.6 107.0

90 174.0 174.0 174.0 174.0 180.4 146.5 167.9 167.9 167.9 167.9 173.9 142.7 161.7 161.7 161.7 161.7 167.3 138.8

7200

75 151.2 133.3 159.9 94.2 173.8 60.8 145.2 129.0 153.4 90.7 166.9 58.4 138.9 124.6 146.8 86.9 159.8 55.9

80 158.2 157.5 164.2 127.7 175.2 79.7 152.3 152.3 157.8 123.8 168.4 76.6 146.1 146.1 151.2 119.7 161.4 73.3

85 166.6 166.6 169.8 156.5 178.1 117.9 160.7 160.7 163.5 152.2 171.3 114.4 154.7 154.7 157.0 147.7 164.4 110.7

90 176.7 176.7 176.7 176.7 182.3 151.3 170.5 170.5 170.5 170.5 175.6 147.4 164.1 164.1 164.1 164.1 168.8 143.3

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

(a)For 3000 and 3900 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Dehumidification (Hot Gas Reheat) with Frostat and Crankcage heaters are required on applications below 320 cfm/ton.

- Multi-speed or single zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

58 RT-PRC043AC-EN

Performance Data

Table 32. Gross cooling capacities 17½ tons three phase high efficiency T/YH*210G3,4,W (stage 1)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2800

3500

4200

4900

5600

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

63.9 60.0 68.3 47.4 74.6 22.7 59.8 56.7 64.0 44.6 70.2 20.3

67.5 66.8 70.0 59.7 75.7 44.0 63.4 63.4 65.8 56.6 71.3 41.4

71.6 71.6 73.0 68.1 76.7 58.1 67.5 67.5 68.8 64.8 72.4 55.2

75.8 75.8 76.7 74.3 79.2 67.9 71.7 71.7 72.5 70.9 74.8 64.8

65.8 63.2 69.7 50.8 75.5 26.3 61.5 59.7 65.2 47.7 70.8 23.7

69.8 69.8 71.9 63.3 77.0 47.8 65.5 65.5 67.4 59.9 72.3 44.9

74.1 74.1 75.2 71.9 78.4 62.1 69.8 69.8 70.8 68.3 73.8 58.9

78.6 78.6 79.1 78.4 81.2 72.1 74.2 74.2 74.7 74.7 76.7 68.7

67.3 65.7 70.6 53.5 76.0 29.2 62.8 61.9 65.9 50.1 71.1 26.3

71.6 71.6 73.2 66.2 77.8 50.9 67.0 67.0 68.5 62.5 73.0 47.7

76.2 76.2 76.9 75.0 79.7 65.4 71.6 71.6 72.2 71.2 74.9 61.9

80.9 80.9 81.1 81.1 82.8 75.6 76.3 76.3 76.4 76.4 78.0 71.9

68.4 67.6 71.1 55.5 76.8 31.5 63.6 63.5 66.2 51.9 71.5 28.2

72.9 72.9 74.1 68.4 77.9 53.3 68.2 68.2 69.2 64.5 73.1 49.7

77.8 77.8 78.1 77.4 80.5 67.9 73.0 73.0 73.2 73.2 75.5 64.1

81.0 81.0 82.6 82.6 84.0 78.3 76.5 75.0 77.7 77.7 79.0 74.4

68.9 68.7 71.2 56.9 77.0 33.0 63.7 63.7 67.0 52.9 72.2 29.5

73.9 73.9 74.6 69.9 78.2 55.0 68.9 68.9 69.5 65.7 73.9 51.1

78.0 78.0 78.9 78.9 80.9 69.8 73.2 71.0 73.8 73.8 75.6 65.7

82.1 82.1 83.7 83.7 84.7 80.4 77.0 77.0 78.6 78.6 79.4 76.1

6125

75

80

85

90

69.1 69.1 71.6 57.4 77.4 33.7 63.9 63.9 68.0 53.2 73.0 30.0

74.3 74.3 74.7 70.5 78.4 55.8 69.1 69.1 71.0 66.1 74.4 51.7

78.6 78.6 79.3 79.3 81.8 70.7 73.5 73.5 74.0 74.0 77.0 66.4

83.5 83.5 84.2 84.2 84.9 81.5 77.2 77.2 78.9 78.9 79.5 77.0

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 2800, 3500, 4200, and 4900 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 59

Performance Data

Table 33. Gross cooling capacities 17½ tons three phase high efficiency T/YH*210G3,4,W (stage 2)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

2800

3500

4200

4900

5600

75 123.5 100.2 134.4 80.1 147.8 44.0 117.3 96.3 127.4 77.0 139.9 41.8

80 126.3 111.0 136.4 97.8 148.9 73.2 120.1 106.7 129.4 94.1 141.1 70.2

85 130.4 119.4 138.3 110.3 150.0 92.9 124.2 114.7 131.3 106.1 142.3 89.4

90 135.4 126.3 141.8 119.6 151.1 106.9 129.0 121.3 134.8 115.0 143.4 102.8

75 129.9 108.5 142.2 87.5 152.2 50.4 123.2 104.2 134.6 84.0 143.9 47.6

80 133.3 120.2 142.4 106.1 154.0 80.6 126.7 115.4 135.0 102.0 145.8 77.2

85 138.0 129.2 145.1 119.4 155.8 101.2 131.3 124.0 137.7 114.7 147.7 97.2

90 143.5 136.7 149.2 129.3 157.7 115.9 136.7 131.2 141.7 124.3 149.6 111.4

75 135.1 115.8 146.3 93.8 160.5 55.6 128.0 111.0 138.3 89.8 151.6 52.4

80 139.3 128.2 147.4 113.3 160.5 86.9 132.2 122.9 139.6 108.7 151.8 83.0

85 144.5 137.8 150.7 127.3 160.6 108.4 137.4 132.2 142.9 122.2 152.0 103.9

90 150.5 145.9 155.4 137.9 163.1 123.8 143.2 139.9 147.6 132.5 154.6 118.9

75 139.2 121.9 149.3 99.0 162.4 59.6 131.7 116.7 140.9 94.5 153.0 56.0

80 144.1 135.1 151.3 119.4 163.3 92.0 136.6 129.4 143.0 114.3 154.1 87.7

85 149.9 145.4 155.3 134.1 164.2 114.4 142.4 139.3 147.1 128.6 155.2 109.5

90 156.3 153.9 160.6 145.4 167.5 130.6 148.6 147.5 152.3 139.5 158.5 125.3

75 142.3 126.9 151.2 103.0 163.2 62.6 134.3 121.2 142.3 98.1 153.4 58.5

80 147.8 140.8 154.1 124.3 165.0 96.0 139.9 134.7 145.3 118.8 155.4 91.2

85 154.2 151.7 158.8 139.8 166.8 119.3 146.3 145.2 150.1 133.8 157.4 114.0

90 161.1 160.8 164.6 151.7 170.7 136.3 152.9 152.9 155.9 145.4 161.4 130.5

6125

75 143.8 129.9 151.9 105.3 164.1 64.0 135.5 123.9 142.7 100.0 154.0 59.6

80 149.9 144.4 155.4 127.3 165.5 98.3 141.7 137.9 146.4 121.4 155.6 93.2

85 156.7 155.8 160.7 143.3 168.0 122.3 148.4 148.4 151.7 137.0 158.2 116.6

90 163.9 163.9 167.0 155.7 172.5 139.8 155.4 155.4 157.9 149.0 162.8 133.6

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 2800, 3500, 4200, and 4900 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

60 RT-PRC043AC-EN

Performance Data

Table 34. Gross cooling capacities 17½ tons three phase high efficiency T/YH*210G3,4,W (full load)

Air

Flow cfm (a)

3500

4200

4900

5600

6300

7000

7700

8400

85

Ambient Temperature

95 105

Ent Entering Wet Bulb

DB 61 67 73 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 178.2 140.1 193.8 111.1 207.3 60.7 169.5 134.8 186.6 107.2 204.8 58.4 159.9 128.9 174.5 102.7 183.6 55.5

80 182.3 156.6 197.4 136.9 211.8 102.1 173.6 150.4 187.6 132.0 205.4 98.5 164.0 143.7 177.0 126.4 187.8 94.3

85 188.5 169.5 200.2 155.6 217.6 130.7 179.6 162.7 190.4 149.7 206.7 126.0 169.9 155.2 179.7 143.3 195.0 120.8

90 195.9 180.3 205.3 169.8 219.0 151.3 186.7 172.9 195.3 163.3 208.1 145.8 176.7 164.9 184.5 156.2 196.4 139.7

75 186.2 150.2 194.6 120.2 212.8 68.8 177.0 144.4 193.2 115.8 211.6 66.0 166.9 138.0 183.6 110.8 196.3 62.6

80 191.0 167.4 205.2 147.0 223.4 111.3 181.8 160.8 194.9 141.5 212.2 107.2 171.7 153.5 183.7 135.5 198.7 102.5

85 197.7 181.0 208.6 166.4 225.1 140.8 188.3 173.7 198.3 160.1 213.7 135.6 178.1 165.7 187.1 153.2 201.5 129.9

90 205.5 192.4 214.2 181.3 227.2 162.2 195.9 184.5 203.8 174.3 215.8 156.2 185.3 176.0 192.4 166.7 203.5 149.6

75 193.4 159.4 211.5 128.5 229.7 76.0 183.6 153.0 200.5 123.6 217.5 72.7 173.0 146.1 188.6 118.0 204.6 68.8

80 198.8 177.4 212.0 156.2 230.6 119.6 189.1 170.2 201.2 150.2 218.2 114.9 178.5 162.4 189.5 143.6 205.4 109.7

85 206.0 191.6 216.1 176.3 231.7 150.0 196.1 183.7 205.2 169.5 219.8 144.3 185.4 175.3 193.6 162.1 207.0 138.0

90 214.3 203.5 222.3 191.9 234.4 172.2 204.1 195.1 211.3 184.4 222.5 165.6 193.0 186.1 199.4 176.3 209.8 158.5

75 199.6 167.6 216.7 135.8 236.2 82.3 189.4 160.8 205.1 130.4 223.6 78.5 178.3 153.3 192.7 124.3 206.4 74.0

80 205.7 186.4 218.0 164.4 237.1 126.9 195.5 178.7 206.6 157.9 224.2 121.8 184.4 170.4 194.4 150.8 211.7 116.0

85 213.5 201.3 222.7 185.3 237.4 158.2 203.1 192.9 211.4 178.0 225.0 152.0 191.8 183.9 199.1 170.0 211.7 145.2

90 222.1 213.8 229.4 201.6 240.8 181.2 211.4 204.9 217.9 193.6 228.4 174.2 199.8 195.3 205.5 184.9 215.1 166.5

75 205.0 174.9 220.9 142.2 240.8 87.7 194.2 167.6 208.8 136.2 227.7 83.3 182.6 159.6 195.9 129.7 208.9 78.4

80 211.7 194.5 223.1 171.7 241.7 133.3 201.0 186.3 211.2 164.7 228.6 127.7 189.4 177.4 198.5 157.1 214.6 121.4

85 220.0 210.0 228.4 193.4 242.2 165.6 209.1 201.1 216.6 185.6 229.3 158.8 197.3 191.6 203.8 177.1 215.5 151.5

90 229.1 223.1 235.7 210.4 246.2 189.3 217.8 213.7 223.6 201.8 233.3 181.8 205.7 203.6 210.8 192.6 219.5 173.6

75 209.4 181.3 224.2 147.7 243.2 92.1 198.2 173.4 211.7 141.2 230.3 87.2 186.0 165.0 198.2 134.1 210.2 81.8

80 216.9 201.6 227.2 178.1 244.8 138.8 205.6 192.9 214.8 170.5 231.2 132.7 193.4 183.6 201.6 162.4 216.7 125.9

85 225.6 217.8 233.3 200.6 246.1 172.0 214.2 208.4 220.9 192.2 232.7 164.7 201.9 198.4 207.6 183.2 218.4 156.9

90 235.1 231.5 241.0 218.2 250.8 196.5 223.4 221.5 228.5 209.1 237.4 188.4 210.8 210.8 215.1 199.4 223.1 179.7

75 213.0 186.8 226.7 152.2 245.6 95.6 201.2 178.4 213.6 145.2 231.9 90.2 188.6 169.4 199.6 137.6 210.6 84.2

80 221.1 207.9 230.5 183.5 247.0 143.4 209.3 198.6 217.6 175.5 232.8 136.7 196.6 188.8 203.8 166.8 217.9 129.4

85 230.4 224.7 237.2 206.8 249.1 177.5 218.4 214.8 224.3 197.9 235.2 169.7 205.6 204.3 210.5 188.4 220.4 161.4

90 240.3 238.9 245.5 225.1 254.5 202.8 228.0 228.0 232.4 215.5 240.5 194.2 214.9 214.9 218.5 205.3 225.7 185.0

75 215.7 191.3 228.2 155.8 246.8 98.2 203.4 182.4 214.6 148.3 232.7 92.3 190.2 172.9 200.2 140.2 220.4 85.8

80 224.4 213.2 232.9 188.1 248.3 147.1 212.1 203.4 219.5 179.5 233.6 139.9 199.0 193.1 205.2 170.3 220.8 132.1

85 234.2 230.7 240.2 212.1 251.3 182.0 221.8 220.3 226.8 202.7 236.8 173.8 208.4 208.4 212.6 192.7 221.5 164.9

90 244.5 244.5 249.1 231.1 257.3 208.1 231.8 231.8 235.5 221.0 242.8 199.0 218.1 218.1 221.1 210.2 227.5 189.3

RT-PRC043AC-EN 61

Performance Data

Table 34. Gross cooling capacities 17½ tons three phase high efficiency T/YH*210G3,4,W (full load)

Air

Flow cfm

(a)

3500

115

Ambient Temperature

120 125

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 149.5 122.4 158.0 97.6 172.5 52.1 144.0 119.0 155.8 94.8 165.9 50.1 138.2 115.3 148.3 91.9 160.8 48.0

80 153.6 136.3 165.4 120.3 176.7 89.5 148.1 132.4 159.3 117.0 169.4 86.9 142.3 128.4 153.0 113.5 163.4 84.1

85 159.3 147.2 168.2 136.3 182.4 114.9 153.7 143.0 162.1 132.6 175.8 111.8 147.8 138.6 155.8 128.7 169.0 108.4

90 165.8 156.4 172.8 148.5 183.8 133.0 160.1 151.8 166.7 144.4 177.2 129.4 154.1 147.2 160.3 140.2 170.4 125.7

75 156.0 131.0 171.4 105.2 184.6 58.6 150.2 127.2 164.9 102.2 174.8 56.4 144.2 123.3 158.3 99.0 162.4 54.0

4200

4900

5600

6300

7000

80 160.8 145.6 171.6 128.8 186.8 97.2 155.0 141.5 165.3 125.2 175.3 94.3 149.0 137.2 158.7 121.5 168.6 91.2

85 167.0 157.2 175.0 145.6 188.4 123.5 161.1 152.7 168.7 141.6 181.5 120.1 155.0 148.0 162.1 137.5 174.4 116.5

90 173.9 166.9 180.2 158.5 190.4 142.3 167.9 162.1 173.8 154.1 183.6 138.5 161.6 157.2 167.1 149.6 176.5 134.5

75 161.6 138.6 175.9 111.9 190.2 64.3 155.5 134.6 169.2 108.6 180.7 61.8 149.3 130.4 162.3 105.2 175.1 59.2

80 167.0 154.0 176.9 136.4 192.8 103.9 161.0 149.6 170.3 132.6 181.3 100.7 154.7 145.0 163.5 128.6 176.4 97.4

85 173.7 166.2 181.0 154.0 193.4 131.1 167.6 161.4 174.4 149.8 186.3 127.4 161.3 156.5 167.6 145.3 178.9 123.6

90 181.1 176.5 186.7 167.5 196.1 150.7 174.8 171.5 180.0 162.9 189.0 146.6 168.3 166.3 173.1 158.2 181.7 142.4

75 166.3 145.3 179.4 117.7 192.5 69.0 160.0 141.0 172.5 114.1 184.5 66.3 153.5 136.6 165.3 110.4 176.9 63.4

80 172.4 161.5 181.4 143.1 197.4 109.7 166.1 156.8 174.5 139.0 189.9 106.3 159.6 152.0 167.4 134.8 182.2 102.7

85 179.6 174.3 186.1 161.5 197.6 137.8 173.2 169.3 179.2 157.0 190.2 133.9 166.6 164.1 172.1 152.3 182.6 129.8

90 187.4 185.2 192.3 175.7 201.0 158.2 180.9 179.9 185.4 170.8 193.6 153.9 174.1 174.1 178.2 165.8 186.0 149.3

75 170.1 151.0 182.1 122.5 194.1 72.8 163.6 146.5 174.9 118.7 185.6 69.8 156.8 141.9 167.5 114.8 178.3 66.7

80 176.9 168.0 184.9 148.8 199.8 114.6 170.3 163.1 177.8 144.5 192.1 110.9 163.5 158.0 170.4 140.0 184.1 107.1

85 184.6 181.5 190.2 168.0 200.8 143.6 178.0 176.2 183.1 163.2 193.2 139.4 171.1 170.8 175.8 158.3 185.3 135.1

90 192.8 192.8 197.0 182.9 204.9 164.8 186.0 186.0 189.8 177.7 197.2 160.2 179.0 179.0 182.4 172.5 189.4 155.4

75 173.0 155.9 183.9 126.5 194.4 75.7 166.2 151.1 176.5 122.4 186.5 72.4 159.2 146.2 168.8 118.2 178.8 69.0

80 180.4 173.6 187.5 153.7 201.3 118.5 173.6 168.4 180.1 149.1 193.3 114.6 166.6 163.1 172.5 144.3 185.1 110.5

85 188.7 187.8 193.5 173.6 203.2 148.5 181.8 181.8 186.2 168.6 195.3 144.0 174.7 174.7 178.6 163.4 187.2 139.4

90 197.3 197.3 200.8 189.1 207.9 170.4 190.2 190.2 193.4 183.8 200.0 165.5 183.0 183.0 185.7 178.2 191.9 160.5

75 175.1 159.8 184.8 129.4 195.2 77.6 168.0 154.8 177.1 125.1 187.2 74.1 160.7 149.6 169.2 120.7 179.2 70.5

7700

80 183.1 178.3 189.2 157.6 202.0 121.5 176.0 172.9 181.6 152.7 193.7 117.4 168.7 167.3 173.8 147.7 185.3 113.0

85 191.9 191.9 195.9 178.3 204.7 152.4 184.8 184.8 188.3 173.0 196.5 147.7 177.4 177.4 180.4 167.6 188.1 142.8

90 200.9 200.9 203.8 194.5 210.1 175.1 193.6 193.6 196.0 188.8 201.9 170.0 186.1 186.1 188.1 183.1 193.5 164.7

75 176.2 162.8 184.8 131.5 195.6 78.7 168.9 157.5 177.8 126.9 187.9 74.9 161.3 152.0 170.0 122.2 180.3 71.0

8400

80 184.9 182.1 190.1 160.6 202.4 123.6 177.6 176.4 182.2 155.4 194.3 119.2 170.0 170.0 174.1 150.2 184.4 114.6

85 194.2 194.2 197.4 182.1 205.3 155.4 186.8 186.8 189.5 176.5 196.8 150.4 179.2 179.2 181.4 170.8 188.2 145.3

90 203.6 203.6 205.8 198.9 211.3 178.9 196.1 196.1 197.8 193.0 202.9 173.5 188.3 188.3 189.6 187.0 194.2 168.0

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 3500, 4200, and 4900 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

62 RT-PRC043AC-EN

Performance Data

Table 35. Gross cooling capacities 17½ tons three phase dehumidification (hot gas reheat) option high efficiency T/

YHD210G3,4,W (Digit 22 = B)

Air

Flow cfm (a)

3500

4550

5600

6300

7000

7700

8400

85

Ambient Temperature

95 105

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 157.6 122.6 174.5 95.9 196.1 56.8 151.2 119.5 166.8 93.6 187.2 55.2 143.7 115.7 158.2 90.5 177.3 53.0

80 160.6 140.5 174.2 120.6 192.5 88.1 154.0 136.7 166.5 117.6 183.6 85.9 146.5 132.2 157.8 113.8 173.6 83.0

85 165.2 154.7 175.6 141.4 190.7 115.7 158.6 150.2 167.8 137.7 181.7 112.8 151.0 145.0 159.0 133.3 171.6 109.2

90 171.5 165.0 178.7 158.5 190.5 139.5 164.8 159.9 170.8 154.1 181.4 135.9 157.2 154.0 161.9 149.1 171.3 131.6

75 167.1 138.7 182.4 110.5 202.3 69.8 160.1 134.8 174.2 107.4 192.8 67.5 152.2 130.2 164.9 103.5 182.4 64.4

80 171.1 158.1 183.1 136.6 199.7 102.6 164.0 153.5 174.8 132.7 190.2 99.5 156.0 148.2 165.5 128.2 179.7 95.8

85 176.7 173.6 185.5 158.8 198.9 131.5 169.6 168.3 177.1 154.3 189.3 127.8 161.4 161.4 167.7 149.1 178.7 123.4

90 184.0 184.0 189.5 177.3 199.7 156.7 176.8 176.8 181.1 172.1 190.0 152.3 168.6 168.6 171.6 166.2 179.4 147.2

75 174.9 145.5 188.5 116.5 206.7 75.0 167.3 141.2 179.7 113.0 196.7 72.3 158.8 136.2 169.9 108.7 185.7 68.8

80 179.8 165.5 190.1 143.2 205.1 108.5 172.2 160.6 181.3 139.0 195.1 105.0 163.6 154.9 171.5 134.1 184.0 100.9

85 186.4 181.8 193.5 166.2 205.3 138.1 178.7 176.1 184.6 161.3 195.1 134.0 170.0 169.7 174.7 155.7 184.0 129.2

90 194.7 194.2 198.5 185.3 207.0 164.0 186.9 186.9 189.5 179.8 196.8 159.2 178.1 178.1 179.6 173.5 185.7 153.7

75 179.1 151.4 191.5 121.6 208.6 79.4 171.1 146.7 182.4 117.7 198.3 76.2 162.2 141.3 172.3 113.1 187.0 72.4

80 184.6 172.1 193.9 149.1 207.7 113.5 176.6 166.8 184.7 144.5 197.3 109.7 167.7 160.7 174.5 139.1 185.9 105.1

85 191.9 189.1 197.9 172.7 208.5 143.9 183.8 183.0 188.6 167.4 198.0 139.3 174.8 174.8 178.3 161.4 186.5 134.1

90 200.8 200.8 203.5 192.6 210.9 170.4 192.6 192.6 194.2 186.6 200.4 165.2 183.5 183.5 183.9 179.9 188.8 159.3

75 182.4 156.5 193.8 125.9 209.8 82.9 174.2 151.4 184.3 121.6 199.1 79.3 164.9 145.6 173.8 116.6 187.4 75.1

80 188.6 177.9 196.8 154.0 209.5 117.7 180.3 172.1 187.2 149.0 198.8 113.5 171.0 165.6 176.7 143.3 187.0 108.5

85 196.5 195.5 201.4 178.4 211.0 148.7 188.1 188.1 191.8 172.7 200.1 143.8 178.7 178.7 181.2 166.3 188.3 138.2

90 206.1 206.1 207.7 198.9 214.1 176.0 197.6 197.6 198.0 192.5 203.1 170.4 185.5 185.5 187.3 185.5 191.2 164.1

75 185.0 160.6 195.3 129.3 210.2 85.5 176.4 155.2 185.4 124.6 199.1 81.5 166.7 149.0 174.6 119.2 187.0 76.9

80 191.9 182.8 198.9 158.1 210.6 121.0 183.2 176.6 189.0 152.7 199.4 116.4 173.5 169.7 178.0 146.6 187.3 111.0

85 200.4 200.4 204.2 183.1 212.6 152.7 191.6 191.6 194.2 177.1 201.4 147.4 181.9 181.9 183.2 170.3 189.2 141.4

90 210.6 210.6 211.2 204.4 216.4 180.7 201.8 201.8 201.1 197.6 205.1 174.7 190.0 190.0 190.0 190.0 192.8 168.0

75 186.8 164.0 195.9 131.8 209.7 87.2 177.8 158.1 185.7 126.7 198.3 82.9 167.8 151.5 174.5 120.9 185.9 77.8

80 194.3 186.8 200.2 161.3 210.8 123.5 185.2 180.2 189.9 155.6 199.3 118.4 175.2 172.9 178.6 149.0 186.8 112.7

85 203.5 203.5 206.2 187.1 213.5 155.9 194.4 194.4 195.8 180.6 201.9 150.2 184.2 184.2 184.5 173.4 189.3 143.8

90 214.4 214.4 213.8 209.0 217.9 184.5 201.3 201.3 203.4 201.8 206.2 178.1 191.9 191.9 191.9 191.9 193.6 171.1

RT-PRC043AC-EN 63

Performance Data

Table 35. Gross cooling capacities 17½ tons three phase dehumidification (hot gas reheat) option high efficiency T/

YHD210G3,4,W (Digit 22 = B)

115

Ambient Temperature

120 125

Air

Flow

cfm (a)

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

3500

4550

5600

6300

75 135.3 111.1 148.5 86.8 166.4 50.0 130.7 108.6 143.3 84.7 160.6 48.2 125.9 105.9 137.9 82.4 154.5 46.3

80 138.0 127.0 148.0 109.4 162.7 79.3 133.4 124.2 142.8 106.9 156.8 77.2 128.5 121.1 137.3 104.3 150.8 75.0

85 142.4 139.2 149.2 128.2 160.6 104.8 137.8 136.0 143.9 125.4 154.8 102.4 132.9 132.6 138.4 122.4 148.6 99.8

90 148.5 147.5 152.1 143.3 160.3 126.6 143.8 143.8 146.8 140.1 154.3 123.8 138.9 138.9 141.2 136.8 148.2 120.9

75 143.2 124.9 154.8 99.0 171.0 60.6 138.3 119.0 149.3 93.8 164.9 56.2 133.2 118.9 143.6 93.8 158.6 56.2

80 146.9 142.2 155.2 123.0 168.2 91.3 142.0 135.6 149.7 117.2 162.1 86.3 136.9 135.5 144.0 117.1 155.8 86.2

85 152.3 152.3 157.4 143.2 167.2 118.3 147.4 147.4 151.9 136.7 161.0 112.5 142.2 142.2 146.1 136.6 154.6 112.4

90 159.6 159.6 161.2 159.6 167.8 141.4 154.4 154.4 155.7 152.4 161.6 134.9 149.8 149.8 149.8 149.8 155.1 134.9

75 149.3 130.5 159.2 103.8 173.8 64.6 144.2 127.4 153.5 101.1 167.4 62.3 138.8 124.1 147.5 98.2 160.8 59.8

80 154.0 148.5 160.7 128.5 172.0 96.1 148.8 145.0 154.9 125.4 165.6 93.4 143.4 141.4 148.9 122.2 159.0 90.5

85 160.4 160.4 163.8 149.4 171.9 123.7 155.2 155.2 158.0 146.0 165.5 120.6 149.7 149.7 151.9 142.4 158.8 117.4

90 168.4 168.4 168.6 166.5 173.5 147.5 162.8 162.8 162.8 162.8 167.0 144.1 156.7 156.7 156.7 156.7 160.3 140.6

75 152.4 135.2 161.2 107.7 174.6 67.8 147.0 131.9 155.2 104.8 168.1 65.3 141.5 128.4 149.1 101.7 161.3 62.5

80 157.7 153.9 163.3 133.1 173.5 99.9 152.4 150.2 157.3 129.9 166.9 97.0 146.8 146.4 151.1 126.4 160.1 94.0

85 164.7 164.7 167.1 154.7 174.1 128.2 159.4 159.4 161.1 151.1 167.5 125.0 153.7 153.7 154.8 147.3 160.6 121.6

90 172.5 172.5 172.5 172.5 176.3 152.7 166.5 166.5 166.5 166.5 169.7 149.2 160.2 160.2 160.2 160.2 162.8 145.4

7000

7700

75 154.6 139.1 162.3 110.8 174.7 70.1 149.1 135.5 156.2 107.7 168.0 67.4 143.4 131.9 149.9 104.4 161.0 64.4

80 160.6 158.4 165.1 136.9 174.2 102.9 155.1 154.6 159.0 133.4 167.5 99.8 149.3 149.3 152.6 129.8 160.5 96.6

85 168.3 168.3 169.6 159.2 175.4 131.9 162.8 162.8 163.4 155.4 168.7 128.5 156.9 156.9 157.0 151.4 161.6 124.9

90 175.7 175.7 175.7 175.7 178.3 157.1 169.4 169.4 169.4 169.4 171.5 153.3 163.0 163.0 163.0 163.0 164.4 149.4

75 156.1 142.0 162.7 113.0 174.0 71.5 150.5 138.3 156.4 109.7 167.1 68.6 144.5 134.4 149.9 106.2 159.9 65.5

80 162.8 162.1 166.1 139.8 174.2 105.0 157.1 157.1 159.8 136.1 167.2 101.7 151.1 151.1 153.3 132.3 160.0 98.3

85 171.1 171.1 171.2 162.8 176.0 134.7 165.4 165.4 164.9 158.8 169.0 131.1 159.4 159.4 158.3 154.6 161.8 127.3

90 178.0 178.0 178.0 178.0 179.5 160.6 171.6 171.6 171.6 171.6 172.5 156.7 165.0 165.0 165.0 165.0 165.3 152.5

8400

75 156.8 144.2 162.3 114.4 172.5 72.1 151.0 140.3 155.8 110.8 165.4 69.0 144.9 136.2 149.1 107.1 158.0 65.6

80 164.1 164.1 166.4 141.8 173.3 106.3 158.2 158.2 159.9 138.0 166.2 102.8 152.1 152.1 153.1 133.9 158.8 99.1

85 173.1 173.1 172.1 165.5 175.8 136.7 167.2 167.2 165.6 161.3 168.6 132.8 157.2 157.2 158.8 156.9 161.2 128.8

90 179.5 179.5 179.5 179.5 180.0 163.3 173.0 173.0 173.0 173.0 172.8 159.1 166.1 166.1 166.1 166.1 165.3 154.8

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

(a)For 3500, and 4550 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

64 RT-PRC043AC-EN

Performance Data

Table 36. Gross cooling capacities 20 tons three phase high efficiency T/YH*240G3,4,W (stage 1)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

3200

4000

4800

5600

6400

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

85

90

75

80

71.7 67.2 76.0 52.7 82.4 24.7 66.8 63.4 70.9 49.4 77.0 21.9

76.1 75.4 78.6 67.1 84.3 49.4 71.3 71.3 73.5 63.4 78.9 46.1

81.1 81.1 82.5 77.1 86.2 65.8 76.3 76.3 77.4 73.1 80.9 62.2

86.3 86.3 87.1 84.6 89.5 77.4 81.4 81.4 82.0 80.5 84.3 73.6

73.6 70.6 77.4 56.5 83.2 28.8 68.4 66.4 71.9 52.7 79.9 25.6

78.5 78.5 80.4 71.0 85.6 53.6 73.3 73.3 75.0 66.9 79.9 50.0

83.8 83.8 84.8 81.2 88.0 70.2 78.6 78.6 79.4 76.9 82.3 66.3

89.3 89.3 89.8 89.1 91.8 82.0 84.1 84.1 84.4 84.4 86.2 77.9

75.0 73.3 78.2 59.4 85.9 32.1 69.5 68.6 72.5 55.2 80.0 28.5

80.3 80.3 81.8 74.2 86.4 57.1 74.8 74.8 76.1 69.7 80.4 53.0

86.0 86.0 86.6 84.7 89.3 73.9 80.5 80.5 80.9 79.9 83.4 69.6

91.8 91.8 91.9 91.9 93.6 86.0 85.0 85.0 86.2 86.2 87.6 81.4

76.0 75.2 78.6 61.6 86.0 34.7 70.2 70.1 72.5 57.1 80.2 30.7

81.7 81.7 82.7 76.6 86.8 59.8 75.9 75.9 76.7 71.7 80.5 55.4

87.8 87.8 87.9 87.3 90.2 76.8 81.0 81.0 81.9 81.9 83.9 72.1

92.0 92.0 93.6 93.6 94.9 89.2 87.0 88.0 87.6 87.6 88.6 84.2

76.5 76.3 79.0 63.1 87.0 36.5 70.3 70.3 73.0 58.1 81.0 32.1

82.6 82.6 83.2 78.3 88.0 61.8 76.5 76.5 76.8 73.0 82.5 56.9

88.2 88.2 88.8 88.8 90.6 79.0 82.0 82.0 82.4 82.4 84.0 73.9

93.5 93.5 94.8 94.8 95.7 91.6 88.2 88.2 88.5 88.5 89.1 86.2

7000

75

80

85

90

76.5 76.5 81.0 63.7 88.0 37.4 70.2 70.2 75.0 58.4 82.0 32.7

83.0 83.0 83.2 79.0 91.0 62.7 76.6 76.6 78.0 73.4 84.0 57.6

89.0 89.0 89.1 89.1 94.0 80.1 82.2 82.2 82.5 82.5 86.0 74.7

95.0 95.0 95.4 95.4 96.0 92.9 88.4 89.0 88.8 88.8 89.1 87.3

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 3200, 4000, 4800, and 5600 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 65

Performance Data

Table 37. Gross cooling capacities 20 tons three phase high efficiency T/YH*240G3,4,W (stage 2)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

3200

4000

4800

5600

6400

75 147.4 116.5 161.9 94.0 179.6 54.5 139.3 111.3 153.0 89.7 169.9 51.2

80 150.8 130.2 164.3 114.7 181.0 87.0 142.8 124.5 155.5 109.7 171.4 82.9

85 155.8 141.5 166.7 130.2 182.4 110.0 147.8 135.4 158.0 124.7 172.9 105.2

90 161.9 151.4 170.9 142.5 183.7 127.2 153.7 144.9 162.2 136.6 174.4 121.9

75 155.6 127.1 171.7 103.0 185.5 61.7 147.0 121.3 162.1 98.1 175.3 57.9

80 160.1 142.0 172.3 125.2 187.9 96.0 151.5 135.8 163.0 119.7 177.7 91.4

85 165.9 154.4 175.7 141.9 190.2 120.5 157.3 147.7 166.4 135.9 180.2 115.2

90 172.5 165.2 180.7 155.4 192.5 138.9 163.9 158.2 171.5 148.9 182.6 133.1

75 162.5 136.3 177.1 110.6 195.7 67.6 153.4 130.0 167.0 105.3 184.6 63.2

80 167.9 152.5 178.9 134.3 196.1 103.6 158.8 145.7 169.0 128.3 185.3 98.5

85 174.5 166.0 183.2 152.3 196.6 129.6 165.4 158.8 173.5 145.8 186.0 123.8

90 181.8 177.7 189.1 166.9 199.9 149.3 172.6 170.2 179.3 159.9 189.4 143.0

75 168.0 144.2 181.2 116.9 198.4 72.1 158.3 137.4 170.5 111.0 186.8 67.2

80 174.3 161.7 184.1 142.1 200.0 109.9 164.7 154.3 173.7 135.6 188.6 104.2

85 181.7 176.2 189.4 161.4 201.6 137.4 172.0 168.4 179.1 154.3 190.5 131.1

90 189.6 188.8 196.1 177.1 205.9 158.4 179.9 179.9 185.7 169.6 194.9 151.5

75 172.1 150.7 183.8 121.9 199.6 75.3 161.8 143.4 172.6 115.5 187.5 69.9

80 179.3 169.5 187.9 148.6 202.4 114.9 169.2 161.6 177.0 141.5 190.5 108.7

85 187.5 185.1 194.2 169.2 205.2 143.9 177.3 176.8 183.3 161.6 193.5 137.0

90 196.0 196.0 201.6 185.9 210.4 166.2 185.8 185.8 190.7 177.9 198.9 158.8

7000

75 174.2 154.7 184.8 124.8 199.6 76.8 163.5 147.0 173.2 117.9 190.8 71.0

80 182.2 174.4 189.9 152.6 203.3 117.8 171.6 166.2 178.5 145.1 191.0 111.1

85 190.9 190.8 196.8 174.1 207.0 147.9 180.3 180.3 185.5 166.1 194.9 140.6

90 199.9 199.9 204.9 191.6 212.9 171.1 189.3 189.3 193.6 183.2 201.0 163.3

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 3200, 4000, 4800, and 5600 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

66 RT-PRC043AC-EN

Performance Data

Table 38. Gross cooling capacities 20 tons three phase high efficiency T/YH*240G3,4,W (full load)

Air

Flow cfm (a)

4000

4800

5600

6400

7200

8000

8800

9600

85

Ambient Temperature

95 105

Ent Entering Wet Bulb

DB 61 67 73 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 204.7 159.8 224.3 126.6 248.0 69.4 194.8 153.5 213.3 121.7 235.9 66.2 184.1 146.6 201.4 116.3 223.0 62.4

80 209.6 179.2 227.5 156.5 249.7 116.6 199.7 172.0 216.5 150.5 237.6 112.1 189.0 164.2 204.7 143.9 224.8 106.9

85 217.0 194.6 230.8 178.3 251.4 149.6 206.9 186.7 219.8 171.4 239.4 143.9 195.9 178.1 208.0 163.9 226.5 137.7

90 225.7 207.7 236.9 195.3 253.2 173.8 215.3 199.2 225.7 187.6 241.1 167.2 204.1 190.1 213.7 179.4 228.2 160.0

75 214.2 171.5 232.6 137.1 255.1 78.6 203.7 164.6 225.1 131.7 242.5 74.8 192.4 157.1 212.5 125.6 229.0 70.4

80 220.0 191.9 236.7 168.2 257.7 127.2 209.5 184.0 225.1 161.6 245.1 122.0 198.1 175.6 212.7 154.4 231.6 116.3

85 228.0 208.1 240.9 191.0 260.3 161.4 217.3 199.6 229.2 183.5 247.7 155.1 205.7 190.4 216.8 175.4 234.2 148.2

90 237.3 221.9 247.6 208.8 262.9 186.5 226.3 212.8 235.9 200.6 250.2 179.3 214.5 203.1 223.2 191.7 236.7 171.5

75 222.7 182.1 243.9 146.6 261.2 86.7 211.5 174.6 231.5 140.5 248.0 82.3 199.6 166.5 218.3 133.9 233.9 77.4

80 229.3 203.5 244.8 178.8 264.7 136.7 218.1 195.0 232.6 171.6 251.4 130.9 206.2 186.0 219.5 163.8 237.3 124.6

85 237.9 220.6 249.8 202.6 268.1 172.0 226.6 211.4 237.6 194.5 254.8 165.1 214.5 201.7 224.5 185.8 240.7 157.6

90 247.8 235.1 257.3 221.2 271.6 198.1 236.2 225.3 244.9 212.4 258.3 190.3 223.7 215.0 231.6 203.0 244.2 181.9

75 230.0 191.6 249.9 154.9 274.8 93.8 218.3 183.5 236.8 148.3 260.5 88.8 205.7 174.8 223.0 141.0 245.5 83.2

80 237.5 214.0 251.8 188.3 274.8 145.1 225.7 204.9 239.0 180.5 260.7 138.7 213.1 195.3 225.3 172.1 245.9 131.8

85 246.8 231.9 257.6 213.1 274.8 181.6 234.9 222.1 244.8 204.4 260.9 174.1 222.1 211.8 231.1 195.1 246.2 166.0

90 257.2 247.1 265.8 232.6 279.1 208.6 245.0 236.8 252.8 223.1 265.2 200.2 231.9 225.9 239.0 213.1 250.5 191.2

75 236.2 200.1 254.7 162.2 278.3 99.8 223.9 191.4 241.1 155.0 263.4 94.2 210.7 182.0 226.6 147.1 247.8 88.0

80 244.5 223.4 257.7 196.7 279.4 152.5 232.2 213.7 244.3 188.3 264.7 145.5 219.0 203.5 230.0 179.4 249.2 137.9

85 254.6 242.2 264.4 222.5 280.4 190.0 242.0 231.8 250.9 213.2 265.9 181.9 228.7 220.8 236.7 203.3 250.6 173.3

90 265.5 258.1 273.2 242.8 285.6 218.1 252.6 247.2 259.6 232.8 271.1 209.1 239.0 235.6 245.2 222.2 255.8 199.5

75 241.4 207.5 258.4 168.5 280.7 104.7 228.4 198.1 244.2 160.6 265.2 98.5 214.6 188.2 229.1 152.1 249.0 91.7

80 250.5 231.7 262.5 204.1 282.8 158.7 237.6 221.5 248.5 195.1 267.5 151.1 223.8 210.7 233.6 185.5 251.4 143.0

85 261.2 251.3 270.1 230.8 284.9 197.4 248.1 240.4 256.0 220.9 269.8 188.7 234.1 228.8 241.1 210.5 253.9 179.4

90 272.7 268.0 279.6 252.0 291.0 226.5 259.2 256.5 265.4 241.4 275.8 216.9 245.0 244.3 250.3 230.2 259.9 206.7

75 245.4 213.8 261.1 173.6 282.0 108.5 231.9 203.8 246.2 165.1 265.9 101.7 217.5 193.3 230.6 156.1 249.1 94.3

80 255.4 239.0 266.2 210.4 285.2 163.9 241.8 228.2 251.6 200.8 269.3 155.7 227.4 216.7 236.1 190.6 252.6 146.9

85 266.8 259.4 274.6 238.1 288.4 203.8 253.0 247.9 259.9 227.6 272.6 194.4 238.5 235.7 244.4 216.5 256.1 184.6

90 278.8 276.8 284.8 260.1 295.2 233.8 264.7 264.7 270.0 248.9 279.5 223.6 249.9 249.9 254.3 237.1 263.0 212.8

75 248.4 219.0 262.6 177.6 282.2 111.2 234.2 208.4 247.2 168.6 265.5 103.8 219.2 197.3 230.9 158.9 248.1 95.8

80 259.2 245.2 268.8 215.6 286.4 168.0 245.0 233.7 253.6 205.4 270.0 159.2 230.0 221.7 237.5 194.6 252.6 149.8

85 271.3 266.5 278.1 244.3 290.7 209.0 256.9 254.3 262.8 233.2 274.4 199.1 241.7 241.5 246.7 221.5 257.2 188.6

90 283.8 283.8 289.0 267.2 298.4 240.0 269.1 269.1 273.5 255.3 282.1 229.2 253.7 253.7 257.3 242.9 264.9 217.8

RT-PRC043AC-EN 67

Performance Data

Table 38. Gross cooling capacities 20 tons three phase high efficiency T/YH*240G3,4,W (full load)

Air

Flow cfm

(a)

4000

115

Ambient Temperature

120 125

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 172.5 139.1 188.8 110.3 209.3 58.1 166.4 135.1 182.1 107.1 202.2 55.7 160.1 131.0 175.3 103.7 194.8 53.1

80 177.4 155.8 192.0 136.8 211.0 101.2 171.3 151.4 185.4 133.0 203.9 98.1 164.9 146.8 178.5 129.1 196.5 94.9

85 184.2 169.0 195.3 155.9 212.8 130.8 178.0 164.3 188.6 151.7 205.6 127.2 171.6 159.4 181.8 147.3 198.2 123.4

90 192.0 180.4 200.9 170.7 214.5 152.2 185.7 175.3 194.2 166.1 207.3 148.1 179.1 170.1 187.2 161.3 199.9 143.9

75 180.2 149.0 199.0 119.0 214.7 65.5 173.8 144.7 192.0 115.5 207.2 62.8 167.2 140.3 184.7 111.8 199.6 60.0

4800

5600

6400

7200

8000

80 185.9 166.6 199.4 146.7 217.3 110.0 179.5 161.9 192.4 142.6 209.8 106.6 172.9 157.1 185.3 138.4 202.1 103.1

85 193.4 180.7 203.5 166.8 219.8 140.7 186.9 175.7 196.5 162.2 212.3 136.8 180.2 170.5 189.4 157.5 204.7 132.7

90 201.8 192.8 209.8 182.4 222.4 163.1 195.2 187.4 202.7 177.5 214.9 158.7 188.3 181.9 195.5 172.4 207.2 154.2

75 186.8 157.8 204.2 126.7 219.0 71.8 180.1 153.2 196.9 122.8 211.2 68.8 173.2 148.5 189.3 118.9 203.2 65.7

80 193.4 176.4 205.6 155.5 222.4 117.6 186.6 171.4 198.4 151.1 214.6 114.0 179.7 166.2 190.9 146.5 206.6 110.1

85 201.5 191.3 210.6 176.5 225.8 149.6 194.7 186.0 203.3 171.7 218.0 145.3 187.7 180.5 195.9 166.7 210.0 141.0

90 210.5 204.1 217.6 193.0 229.2 172.9 203.5 198.5 210.2 187.8 221.4 168.3 196.4 192.7 202.7 182.4 213.4 163.4

75 192.3 165.5 208.3 133.2 229.6 77.1 185.3 160.6 200.7 129.1 221.3 73.8 178.1 155.6 192.8 124.8 212.9 70.3

80 199.7 185.1 210.8 163.2 230.1 124.3 192.7 179.8 203.3 158.5 222.0 120.3 185.5 174.3 195.5 153.7 213.6 116.1

85 208.5 200.9 216.6 185.2 230.7 157.3 201.4 195.2 209.1 180.1 222.6 152.8 194.1 189.4 201.3 174.8 214.3 148.1

90 218.0 214.4 224.3 202.5 235.0 181.7 210.8 208.4 216.7 197.0 226.9 176.7 203.3 202.3 208.8 191.4 218.6 171.5

75 196.7 172.1 211.3 138.7 231.3 81.2 189.4 167.0 203.4 134.3 222.7 77.7 181.9 161.7 195.2 129.7 213.9 73.9

80 205.0 192.7 214.9 169.8 232.9 129.8 197.7 187.1 207.0 164.8 224.4 125.5 190.1 181.4 199.0 159.7 215.7 121.1

85 214.5 209.3 221.6 192.9 234.5 164.0 207.1 203.4 213.7 187.4 226.1 159.2 199.4 197.2 205.6 181.8 217.5 154.2

90 224.5 223.5 229.9 211.0 239.6 189.3 216.9 216.9 222.0 205.2 231.2 184.0 209.2 209.2 213.8 199.2 222.6 178.6

75 200.0 177.7 213.3 143.1 231.9 84.3 192.4 172.2 205.0 138.4 223.0 80.4 184.6 166.6 196.5 133.5 213.9 76.4

80 209.1 199.3 217.9 175.4 234.5 134.2 201.5 193.4 209.7 170.1 225.7 129.6 193.7 187.3 201.3 164.7 216.7 124.9

85 219.3 216.7 225.4 199.4 237.1 169.6 211.6 210.4 217.2 193.6 228.5 164.4 203.7 203.7 208.8 187.8 219.6 159.2

90 229.9 229.9 234.4 218.4 243.1 195.9 222.0 222.0 226.2 212.3 234.4 190.3 214.0 214.0 217.7 206.0 225.5 184.6

75 202.2 182.2 214.1 146.4 231.3 86.3 194.3 176.4 205.5 141.4 222.2 82.2 186.2 170.5 196.7 136.2 213.5 77.8

8800

80 212.2 204.7 219.7 179.9 235.0 137.6 204.3 198.5 211.3 174.3 226.0 132.7 196.1 192.1 202.6 168.5 217.0 127.7

85 223.1 223.0 228.1 204.8 238.7 174.1 215.0 215.0 219.6 198.8 229.7 168.7 206.8 206.8 211.0 192.6 220.5 163.1

90 234.2 234.2 237.8 224.7 245.6 201.4 226.0 226.0 229.3 218.3 236.6 195.5 217.6 217.6 220.5 211.7 227.4 189.5

75 203.4 185.6 216.0 148.7 233.2 87.3 195.1 179.5 207.0 143.3 224.1 82.8 186.7 173.3 198.0 137.9 213.0 78.1

9600

80 214.2 209.1 220.5 183.2 236.2 139.9 205.9 202.6 211.8 177.4 227.0 134.7 197.5 195.9 202.8 171.3 218.0 129.4

85 225.7 225.7 229.8 209.2 239.2 177.5 217.4 217.4 221.0 202.9 229.9 171.8 208.9 208.9 212.0 196.4 223.0 165.9

90 237.4 237.4 240.2 229.9 246.9 205.8 228.9 228.9 231.3 223.2 237.6 199.6 220.2 220.2 222.3 216.3 228.1 193.3

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 4000, 4800, and 5600 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

68 RT-PRC043AC-EN

Performance Data

Table 39. Gross cooling capacities 20 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD240G3,4,W (Digit 22 = B)

Air

Flow cfm (a)

4000

5200

6400

7200

8000

8800

9600

85

61

Ambient Temperature

95

Entering Wet Bulb

67 73

105

Ent

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 203.7 145.0 228.5 96.2 259.7 90.9 193.4 139.5 217.0 92.5 247.0 86.4 182.4 133.4 204.8 88.3 233.5 81.7

80 206.0 171.4 227.3 134.7 254.8 89.2 195.8 164.9 215.8 130.0 242.1 84.7 184.8 157.8 203.6 124.6 228.6 80.0

85 210.1 191.8 227.8 167.0 251.7 118.8 199.9 184.2 216.3 161.3 239.0 114.9 189.0 176.0 204.1 154.9 225.5 110.4

90 216.1 206.0 230.1 193.2 250.4 157.1 205.9 197.4 218.6 186.5 237.7 152.1 194.9 188.2 206.4 179.1 224.2 146.5

75 218.6 159.9 241.6 108.8 271.0 94.8 207.5 153.9 229.3 104.6 257.4 90.1 195.7 147.3 216.2 99.8 243.0 85.1

80 222.2 188.3 241.6 149.2 267.3 93.6 211.1 181.3 229.3 144.0 253.7 88.8 199.3 173.6 216.2 138.2 239.4 83.8

85 227.6 210.6 243.4 183.5 265.5 133.0 216.5 202.5 231.1 177.3 251.9 128.6 204.7 193.8 218.0 170.4 237.6 123.5

90 234.8 226.8 247.0 211.7 265.4 173.2 223.7 217.7 234.6 204.4 251.9 167.7 211.9 207.9 221.6 196.5 237.5 161.6

75 231.3 173.2 252.5 119.7 280.0 98.0 219.3 166.7 239.3 115.1 265.5 92.9 206.6 159.6 225.3 109.8 250.3 87.6

80 236.2 203.6 253.7 162.1 277.6 97.2 224.2 196.0 240.5 156.4 263.2 93.4 211.5 187.9 226.6 150.1 248.0 88.8

85 242.8 227.8 256.8 198.4 277.0 145.5 230.9 219.3 243.6 191.6 262.6 140.6 218.2 210.0 229.7 184.2 247.4 135.0

90 251.2 245.9 261.6 228.5 278.2 187.7 239.3 236.3 248.4 220.7 263.8 181.7 226.7 226.1 234.5 212.3 248.6 175.1

75 238.5 181.2 258.5 126.2 284.8 99.7 226.0 174.4 244.7 121.2 269.7 94.4 212.7 166.9 230.2 115.5 253.9 88.9

80 244.2 212.9 260.6 169.9 283.2 103.4 231.7 205.0 246.8 163.8 268.2 99.2 218.5 196.5 232.3 157.1 252.4 94.3

85 251.7 238.4 264.4 207.4 283.5 153.0 239.2 229.5 250.7 200.3 268.4 147.7 226.0 220.0 236.2 192.6 252.7 141.8

90 261.0 257.9 270.1 238.9 285.5 196.5 248.5 247.9 256.3 230.7 270.5 190.2 235.3 235.3 241.9 222.0 254.7 183.2

75 244.8 188.5 263.5 131.9 288.6 101.0 231.7 181.3 249.2 126.5 272.9 95.5 217.8 173.5 234.1 120.5 256.6 89.8

80 251.3 221.5 266.4 176.9 287.8 108.9 238.2 213.2 252.1 170.5 272.2 104.3 224.4 204.4 237.0 163.5 255.9 99.1

85 259.6 248.3 271.1 215.8 288.9 159.8 246.5 239.1 256.8 208.3 273.3 154.2 232.7 229.2 241.7 200.2 257.0 147.9

90 269.7 269.0 277.6 248.5 291.8 204.5 256.7 256.7 263.3 240.0 276.2 197.9 242.9 242.9 248.2 230.9 259.9 190.6

75 250.0 195.1 267.5 136.9 291.3 102.0 236.3 187.5 252.6 131.2 275.2 96.3 221.9 179.4 236.9 124.9 258.2 90.4

80 257.4 229.3 271.3 183.2 291.5 113.6 243.7 220.8 256.4 176.5 275.3 108.7 229.3 211.6 240.7 169.1 258.4 103.2

85 266.5 257.5 276.8 223.4 293.4 165.8 252.9 247.9 261.9 215.6 277.2 159.9 238.5 237.7 246.3 207.2 260.3 153.3

90 277.5 277.5 284.1 257.4 297.1 211.9 263.8 263.8 269.2 248.6 280.9 204.9 249.5 249.5 253.6 239.2 264.0 197.3

75 254.3 200.9 270.6 141.2 293.1 102.6 240.0 193.1 255.1 135.2 276.4 96.7 225.0 184.6 238.8 128.5 258.9 90.6

80 262.5 236.5 275.1 188.8 294.1 117.7 248.2 227.6 259.7 181.7 277.4 112.4 233.3 218.1 243.4 174.0 259.9 106.5

85 272.4 266.0 281.5 230.3 296.8 171.2 258.2 256.0 266.0 222.2 280.1 164.9 243.3 243.3 249.8 213.4 262.6 157.9

90 284.2 284.2 289.6 265.7 301.4 218.6 270.0 270.0 274.2 256.5 284.7 211.2 255.1 255.1 258.0 246.7 267.2 203.2

RT-PRC043AC-EN 69

Performance Data

Table 39. Gross cooling capacities 20 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD240G3,4,W (Digit 22 = B)

Air

Flow cfm (b)

Ent

DB 61

115

67 73 61

Ambient Temperature

120

Entering Wet Bulb

67 73 61

125

67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

4000

5200

6400

7200

75 170.7 126.7 191.8 83.3 219.2 76.7 164.5 123.1 185.0 80.6 211.8 74.1 158.2 119.3 178.1 77.8 204.2 71.5

80 173.1 150.0 190.6 118.7 214.4 75.0 166.9 145.9 183.8 115.5 207.0 72.4 160.6 141.6 176.8 112.1 199.4 69.8

85 177.3 167.2 191.1 147.9 211.3 105.2 171.1 162.6 184.4 144.2 203.9 102.4 164.8 157.7 177.4 140.3 196.3 99.4

90 183.2 178.3 193.5 171.0 210.0 140.3 177.1 173.1 186.7 166.8 202.6 137.0 170.8 167.8 179.8 162.3 195.1 133.5

75 183.1 140.0 202.3 94.4 227.9 79.8 176.5 136.2 195.1 91.4 220.1 77.0 169.7 132.1 187.7 88.3 212.0 74.2

80 186.7 165.3 202.4 131.7 224.3 78.5 180.1 160.9 195.2 128.2 216.5 75.8 173.4 156.4 187.8 124.6 208.4 73.0

85 192.1 184.5 204.2 162.9 222.5 117.8 185.6 179.6 197.0 158.9 214.7 114.7 178.8 174.5 189.6 154.7 206.7 111.5

90 199.4 197.5 207.8 187.9 222.5 154.9 192.8 192.1 200.6 183.4 214.6 151.3 186.1 186.1 193.2 178.7 206.6 147.5

75 193.2 151.8 210.6 103.8 234.3 82.0 186.2 147.7 203.0 100.6 226.1 79.1 179.0 143.4 195.2 97.2 217.6 76.2

80 198.1 179.1 211.9 143.1 232.0 83.6 191.1 174.4 204.3 139.3 223.7 80.8 183.9 169.6 196.5 135.4 215.3 77.8

85 204.8 200.2 215.0 176.2 231.4 128.8 197.8 195.0 207.4 172.0 223.2 125.5 190.6 189.7 199.5 167.5 214.8 122.0

90 213.3 213.3 219.8 203.2 232.7 167.8 206.3 206.3 212.2 198.5 224.4 164.0 199.1 199.1 204.4 193.5 216.0 160.0

75 198.7 158.8 214.9 109.2 237.4 83.1 191.4 154.5 207.0 105.8 228.9 80.1 183.9 150.0 198.9 102.3 220.1 77.0

80 204.4 187.3 217.0 149.8 235.9 88.8 197.2 182.5 209.1 145.9 227.4 85.8 189.7 177.5 201.0 141.8 218.6 82.6

85 212.0 209.8 220.9 184.2 236.2 135.3 204.7 204.4 213.0 179.8 227.6 131.7 197.2 197.2 204.9 175.2 218.9 128.1

90 221.3 221.3 226.6 212.5 238.2 175.6 214.0 214.0 218.7 207.6 229.7 171.6 206.6 206.6 210.6 202.5 221.0 167.4

8000

8800

75 203.2 165.0 218.2 113.9 239.5 83.8 195.7 160.6 210.0 110.3 230.6 80.7 187.9 155.9 201.6 106.6 221.6 77.6

80 209.8 194.9 221.2 155.8 238.8 93.2 202.2 189.9 213.0 151.7 230.0 90.1 194.5 184.7 204.6 147.5 221.0 86.7

85 218.2 218.2 225.9 191.5 239.9 141.0 210.6 210.6 217.7 186.9 231.1 137.3 202.9 202.9 209.3 182.2 222.1 133.5

90 228.3 228.3 232.4 221.2 242.8 182.7 220.8 220.8 224.2 216.0 234.0 178.4 213.0 213.0 215.9 210.8 225.0 174.1

75 206.8 170.6 220.5 117.9 240.6 84.2 198.9 165.9 212.0 114.2 231.4 81.0 190.9 161.1 203.3 110.3 222.1 77.7

80 214.2 201.7 224.3 161.1 240.7 97.0 206.3 196.6 215.8 156.8 231.6 93.6 198.3 191.2 207.1 152.4 222.3 90.1

85 223.4 223.4 229.9 198.1 242.7 146.0 215.5 215.5 221.4 193.3 233.6 142.2 207.5 207.5 212.7 188.4 224.3 138.1

90 234.3 234.3 237.2 229.1 246.4 189.0 226.5 226.5 228.8 223.8 237.3 184.6 217.9 217.9 220.1 218.3 228.0 180.1

9600

75 209.3 175.4 221.8 121.2 240.6 84.2 201.2 170.6 213.0 117.3 231.2 80.9 192.8 165.6 204.1 113.2 221.6 77.6

80 217.5 207.9 226.4 165.6 241.6 100.0 209.4 202.5 217.7 161.2 232.2 96.5 201.1 197.0 208.7 156.6 222.6 92.8

85 227.6 227.6 232.8 204.0 244.4 150.4 219.4 219.4 224.1 199.1 235.0 146.3 211.1 211.1 215.1 194.0 225.4 142.1

90 239.4 239.4 241.0 236.2 249.0 194.6 230.0 230.0 232.3 230.8 239.6 190.1 223.3 223.3 223.3 223.3 230.0 185.3

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity (a)

(a)For 4000, and 5200 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)For 4000, and 5200 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

70 RT-PRC043AC-EN

Performance Data

Table 40. Gross cooling capacities 25 tons three phase high efficiency T/YH*300G3,4,W (stage 1)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

4000

5000

6000

7000

8000

75

80

85

90

75

80

85

90

75

80

80.5 78.0 85.7 62.9 93.7 32.5 75.1 73.7 80.0 59.3 87.7 29.5

85.2 85.2 87.8 78.2 94.6 59.2 79.7 79.7 82.1 74.1 88.6 55.8

90.1 90.1 91.3 88.2 95.4 76.5 84.6 84.6 85.6 83.8 89.4 72.6

94.9 94.9 95.3 95.3 97.8 88.2 89.3 89.3 89.5 89.5 91.8 83.9

83.0 82.1 87.6 67.4 95.0 37.4 77.3 77.3 81.6 63.4 88.7 34.1

88.1 88.1 90.2 82.7 96.3 64.2 82.3 82.3 84.2 78.3 90.0 60.3

93.3 93.3 94.0 92.9 97.6 81.6 87.5 87.5 88.0 88.0 91.3 77.2

98.3 98.3 98.3 98.3 100.3 93.3 92.0 92.0 92.2 92.2 94.0 88.7

85.1 85.1 89.0 71.1 95.7 41.5 79.1 79.1 82.7 66.7 89.2 37.8

90.5 90.5 92.0 86.5 97.5 68.3 84.5 84.5 85.8 81.6 90.9 64.1

85

90

75

80

96.0 96.0 96.2 96.2 99.2 85.8 89.9 89.9 89.9 89.9 92.7 81.1

99.8 99.8 100.8 100.8 102.3 97.7 94.0 94.0 94.4 94.4 95.8 92.6

86.6 86.6 89.8 74.0 96.0 44.9 80.3 80.3 83.3 69.2 89.5 40.7

92.4 92.4 93.4 89.5 98.2 71.7 86.1 86.1 86.8 84.2 91.3 67.0

85 96.0 96.0 97.9 97.9 100.4 89.2 91.0 91.0 91.3 91.3 93.6 84.1

90 101.0 101.0 102.8 102.8 103.8 101.2 95.8 95.8 96.1 96.1 97.0 95.8

75

80

87.7 87.7 90.2 76.1 98.2 47.4 81.1 81.1 83.3 70.9 91.0 42.9

93.8 93.8 94.2 91.6 98.4 74.2 87.2 87.2 87.3 86.0 92.0 69.1

85 98.4 98.4 99.1 99.1 101.0 91.8 92.0 92.0 92.2 92.2 93.9 86.3

90 103.7 103.7 104.2 104.2 104.8 104.0 96.0 96.0 97.3 97.3 97.7 97.7

8750

75

80

88.1 88.1 91.0 77.1 98.5 48.8 81.3 81.3 84.0 71.6 92.0 43.9

94.0 94.0 94.5 92.7 99.0 75.6 87.3 87.3 87.4 86.7 93.5 70.2

85 99.0 99.0 99.7 99.7 101.2 93.2 92.4 92.4 92.6 92.6 95.0 87.4

90 104.0 104.0 105.0 105.0 105.2 105.2 97.0 97.0 97.8 97.8 97.9 97.9

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 4000, 5000, 6000, and 7000 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 71

Performance Data

Table 41. Gross cooling capacities 25 tons three phase high efficiency T/YH*300G3,4,W (stage 2)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

4000

5000

6000

7000

8000

75 135.6 118.7 146.9 92.7 156.4 43.8 127.9 113.4 138.5 88.3 147.4 40.5

80 140.7 132.3 148.2 116.5 159.0 84.6 132.9 126.3 139.8 111.3 150.0 80.4

85 146.9 142.2 152.0 132.5 161.5 111.5 138.9 135.7 143.6 126.7 152.5 106.4

90 153.5 150.3 157.2 144.1 164.1 129.8 145.3 143.4 148.6 137.8 155.0 124.2

75 141.2 127.5 151.3 101.4 165.2 52.4 133.0 121.6 142.4 96.4 155.5 48.5

80 147.0 141.5 153.5 125.6 165.8 93.7 138.7 134.9 144.5 119.9 156.2 88.8

85 153.7 151.8 157.9 142.1 166.4 121.0 145.2 144.8 149.0 135.7 156.8 115.4

90 160.7 160.3 163.6 154.1 169.7 139.7 152.0 152.0 154.5 147.2 160.0 133.5

75 145.8 134.8 154.6 108.6 167.3 59.5 137.0 128.2 145.1 103.0 157.1 55.0

80 152.2 149.2 157.6 133.2 168.7 101.2 143.4 142.0 148.2 126.9 158.6 95.8

85 159.4 159.4 162.7 150.1 170.2 128.9 150.4 150.4 153.3 143.2 160.1 122.7

90 166.8 166.8 169.0 162.6 174.1 148.1 157.6 157.6 159.3 155.1 164.0 141.3

75 149.2 140.5 156.8 114.2 168.3 65.0 140.0 133.4 146.9 108.1 157.6 59.9

80 156.3 155.3 160.7 139.3 170.6 107.2 147.0 147.0 150.8 132.4 160.0 101.2

85 164.0 164.0 166.5 156.7 172.9 135.4 154.6 154.6 156.5 149.1 162.3 128.6

90 171.8 171.8 173.2 169.5 177.5 155.0 162.1 162.1 163.1 161.4 166.8 147.6

75 151.6 144.7 158.0 118.3 169.0 69.0 141.9 137.0 147.5 111.6 158.0 63.4

80 159.4 159.4 162.7 143.9 171.4 111.7 149.6 149.6 152.2 136.4 160.3 105.1

85 167.6 167.6 169.1 161.6 174.5 140.3 157.6 157.6 158.7 153.5 163.5 132.9

90 175.7 175.7 176.4 174.9 179.8 160.3 165.5 165.5 165.7 165.7 168.6 152.3

8750

75 152.7 146.8 158.1 120.4 171.3 71.0 142.6 138.7 147.9 113.2 159.6 64.9

80 161.0 161.0 163.4 146.3 172.0 114.0 150.8 150.8 152.7 138.3 161.0 107.0

85 169.5 169.5 170.4 164.3 175.1 142.9 159.2 159.2 159.6 155.8 163.6 135.1

90 178.0 178.0 178.0 177.9 180.8 163.3 166.0 167.4 167.0 167.0 169.3 154.9

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 4000, 5000, 6000, and 7000 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

72 RT-PRC043AC-EN

Performance Data

Table 42. Gross cooling capacities 25 tons three phase high efficiency T/YH*300G3,4,W (stage 3)

Air

Flow cfm (a)

Ambient Temperature

85 95

Ent Entering Wet Bulb

DB 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

4000

5000

6000

7000

8000

75 188.9 150.3 205.8 121.4 226.6 71.4 179.7 145.2 195.3 117.2 214.8 68.3

80 193.3 167.2 208.8 147.0 228.3 111.8 184.1 161.3 198.4 142.0 216.6 107.6

85 199.5 180.7 211.8 165.8 230.0 140.0 190.3 174.2 201.4 160.0 218.4 135.0

90 207.0 192.0 217.1 180.3 231.7 160.6 197.5 185.0 206.7 174.0 220.2 154.9

75 199.5 162.2 218.5 131.4 234.4 79.3 189.4 156.2 206.9 126.4 221.8 75.4

80 204.9 180.5 219.0 158.8 237.2 121.8 194.9 173.8 207.8 153.0 224.7 116.9

85 212.0 195.3 223.1 179.1 240.0 151.8 202.0 188.0 211.9 172.5 227.6 146.0

90 220.2 207.7 229.3 194.9 242.7 173.9 209.9 199.9 218.0 187.7 230.4 167.4

75 208.4 172.8 225.7 140.2 247.8 86.1 197.5 166.0 213.4 134.4 234.0 81.4

80 214.8 192.7 227.6 169.4 248.1 130.7 204.1 185.1 215.6 162.7 234.6 124.9

85 222.8 208.7 232.7 191.2 248.3 162.4 212.0 200.6 220.8 183.8 235.1 155.8

90 231.7 222.2 239.8 208.3 252.1 186.0 220.6 213.6 227.8 200.3 239.0 178.7

75 215.6 182.2 231.3 147.8 251.9 91.6 204.0 174.6 218.2 141.2 237.3 86.1

80 223.2 203.6 234.5 178.8 253.4 138.3 211.6 195.2 221.7 171.3 239.1 131.7

85 232.0 220.9 240.7 202.1 255.0 171.8 220.4 211.9 228.0 193.8 241.0 164.4

90 241.6 235.5 248.7 220.5 259.9 197.0 229.7 226.1 235.9 211.7 246.0 188.8

75 221.2 190.4 235.3 154.2 254.3 96.0 208.8 181.9 221.3 146.7 238.9 89.6

80 229.8 213.3 239.8 187.0 257.1 144.7 217.5 204.1 226.2 178.6 242.0 137.3

85 239.6 231.8 247.1 211.8 260.0 180.0 227.1 222.1 233.5 202.7 245.2 171.7

90 249.9 247.6 255.9 231.5 266.0 206.7 237.2 237.2 242.3 221.8 251.3 197.7

8750

75 224.3 195.7 237.2 158.2 255.0 98.4 211.3 186.6 222.6 150.1 239.0 91.4

80 233.7 219.7 242.7 192.3 258.9 148.8 220.8 209.9 228.5 183.3 243.1 140.7

85 244.1 239.3 250.8 218.2 262.7 185.4 231.1 228.9 236.6 208.5 247.3 176.5

90 255.0 255.0 260.3 238.9 269.5 213.2 241.7 241.7 246.1 228.6 254.2 203.5

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 4000, 5000, 6000, and 7000 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and

YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 73

Performance Data

Table 43. Gross cooling capacities 25 tons three phase high efficiency T/YH*300G3,4,W (full load)

Air

Flow cfm (a)

5000

6000

7000

8000

9000

10000

11000

85

Ambient Temperature

95 105

Ent Entering Wet Bulb

DB 61 67 73 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 244.4 192.5 271.7 152.0 293.2 82.9 232.4 184.9 257.9 146.3 278.4 79.2 219.4 176.7 243.2 139.9 262.5 74.8

80 250.0 215.3 270.3 187.5 295.4 139.2 238.0 206.6 256.8 180.3 280.5 133.8 225.0 197.3 242.2 172.5 264.5 127.7

85 258.5 233.2 274.2 213.2 297.6 178.4 246.2 223.6 260.6 204.8 282.6 171.4 232.8 213.3 246.0 195.8 266.5 163.9

90 268.6 248.1 281.3 232.8 299.8 206.6 255.9 237.7 267.4 223.5 284.7 198.6 242.1 226.7 252.6 213.6 268.6 189.9

75 255.4 206.3 281.1 164.5 301.6 93.9 242.7 198.1 266.6 158.1 286.0 89.5 228.9 189.1 251.1 150.9 269.3 84.3

80 262.0 230.2 280.9 201.3 304.7 151.7 249.2 220.8 266.6 193.4 289.1 145.6 235.5 210.7 251.4 184.8 272.3 138.7

85 271.2 249.0 285.7 228.0 307.8 192.1 258.2 238.7 271.4 219.0 292.1 184.5 244.1 227.7 256.1 209.2 275.3 176.2

90 282.0 264.7 293.6 248.6 311.0 221.4 268.5 253.6 279.0 238.6 295.1 212.7 253.9 241.8 263.4 227.9 278.3 203.3

75 265.0 218.8 289.1 175.7 308.5 103.5 251.6 209.8 273.9 168.5 292.2 98.3 237.1 200.1 257.7 160.6 274.8 92.5

80 272.6 243.7 290.1 213.7 312.6 162.9 259.1 233.6 275.1 205.1 296.2 156.0 244.6 222.8 259.1 195.8 278.8 148.4

85 282.6 263.5 295.9 241.5 316.7 204.5 268.8 252.4 280.9 231.7 300.2 196.1 254.0 240.6 264.8 221.2 282.7 187.1

90 293.9 279.9 304.6 263.0 320.8 234.9 279.7 268.1 289.2 252.2 304.2 225.4 264.4 255.6 272.9 240.8 286.7 215.3

75 273.3 229.9 295.7 185.4 324.1 111.8 259.1 220.1 279.8 177.5 306.4 105.9 243.9 209.7 262.8 168.9 287.8 99.3

80 281.8 255.9 298.0 224.7 324.2 172.6 267.6 245.0 282.2 215.4 306.7 165.0 252.3 233.5 265.5 205.3 288.3 156.6

85 292.5 276.6 304.7 253.7 324.2 215.6 278.0 264.7 288.9 243.1 307.0 206.4 262.5 252.2 272.1 231.9 288.7 196.7

90 304.5 293.8 314.1 276.0 329.2 247.0 289.5 281.2 298.1 264.5 311.9 236.8 273.5 268.0 281.0 252.4 293.6 225.9

75 280.1 239.6 301.0 193.8 327.8 118.7 265.2 229.1 284.3 185.2 309.4 112.0 249.3 218.0 266.6 175.8 290.0 104.7

80 289.6 266.7 304.4 234.4 329.1 181.0 274.7 255.1 288.0 224.3 310.9 172.6 258.7 242.8 270.5 213.5 291.7 163.6

85 301.1 288.3 312.1 264.4 330.3 225.2 285.9 275.7 295.6 253.1 312.3 215.4 269.6 262.5 278.1 241.2 293.3 204.9

90 313.7 306.3 322.3 287.7 336.3 257.8 297.9 293.0 305.5 275.5 318.3 246.8 281.2 279.0 287.7 262.6 299.2 235.1

75 285.6 247.9 304.9 200.8 330.2 124.2 270.0 236.7 287.4 191.4 311.0 116.8 253.3 224.8 269.0 181.3 290.9 108.7

80 296.1 276.1 309.5 242.7 332.6 188.0 280.4 263.8 292.3 231.9 313.7 178.9 263.6 250.7 274.1 220.3 293.7 169.1

85 308.3 298.6 318.2 273.8 335.0 233.5 292.3 285.3 300.9 261.7 316.3 222.9 275.3 271.3 282.6 249.0 296.6 211.7

90 321.4 317.4 329.1 298.0 342.0 267.1 305.0 303.3 311.6 285.0 323.2 255.4 287.5 287.5 293.0 271.4 303.4 243.0

75 289.7 254.9 307.3 206.5 331.1 128.3 273.3 243.0 289.2 196.3 311.2 120.2 255.9 230.3 270.0 185.5 291.5 111.3

80 301.1 284.2 313.2 249.6 334.7 193.7 284.7 271.1 295.2 238.0 315.1 183.8 267.2 257.3 276.3 225.8 294.4 173.2

85 314.1 307.6 322.8 281.8 338.3 240.4 297.4 293.5 304.8 269.0 318.9 229.1 279.6 278.8 285.8 255.6 298.4 217.1

90 327.9 327.1 334.5 306.9 346.3 275.1 310.7 310.7 316.3 293.2 326.8 262.7 292.5 292.5 297.0 278.8 306.2 249.5

74 RT-PRC043AC-EN

Performance Data

Table 43. Gross cooling capacities 25 tons three phase high efficiency T/YH*300G3,4,W (full load)

Air

Flow cfm

(a)

5000

115

Ambient Temperature

120 125

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 205.4 167.9 227.4 132.8 245.5 69.7 198.0 163.2 219.2 129.0 236.7 66.9 190.4 158.3 210.7 125.0 227.6 64.0

80 210.9 187.2 226.7 164.0 247.5 120.9 203.5 182.0 218.5 159.5 238.6 117.2 195.9 176.5 210.1 154.8 229.5 113.4

85 218.5 202.3 230.4 186.2 249.5 155.7 211.0 196.6 222.2 181.1 240.6 151.3 203.2 190.7 213.8 175.8 231.4 146.8

90 227.3 215.0 236.7 202.9 251.5 180.5 219.5 208.8 228.4 197.4 242.5 175.5 211.5 202.5 219.8 191.6 233.4 170.4

75 214.2 179.5 234.6 143.1 251.7 78.5 206.5 174.4 226.0 138.9 242.5 75.3 198.5 169.2 217.1 134.6 233.0 72.0

6000

7000

8000

9000

10000

80 220.7 199.9 235.1 175.6 254.6 131.2 212.9 194.3 226.6 170.7 245.4 127.1 204.9 188.5 217.8 165.6 235.9 122.9

85 229.0 216.0 239.7 198.8 257.5 167.2 221.1 209.8 231.2 193.3 248.3 162.5 213.0 203.6 222.4 187.7 238.8 157.6

90 238.4 229.3 246.8 216.5 260.5 193.1 230.3 222.9 238.1 210.6 251.2 187.8 221.9 216.2 229.2 204.5 241.6 182.3

75 221.7 189.7 240.4 152.0 256.4 85.9 213.6 184.3 231.5 147.5 246.8 82.4 205.2 178.7 222.2 142.8 237.0 78.7

80 229.1 211.3 242.1 185.8 260.3 140.1 220.9 205.2 233.2 180.5 250.7 135.7 212.6 199.1 224.1 175.1 240.8 131.1

85 238.2 228.2 247.7 210.1 264.2 177.4 229.9 221.7 238.8 204.3 254.6 172.3 221.4 215.1 229.6 198.2 244.7 167.0

90 248.2 242.4 255.6 228.7 268.1 204.4 239.7 235.5 246.5 222.4 258.4 198.7 230.9 228.5 237.2 215.9 248.5 192.8

75 227.7 198.6 244.9 159.6 268.2 92.0 219.2 192.8 235.5 154.6 258.0 88.1 210.5 186.8 225.9 149.6 247.5 84.0

80 236.1 221.2 247.7 194.6 268.8 147.6 227.6 214.8 238.5 189.0 258.7 142.8 218.8 208.3 229.0 183.2 248.4 137.9

85 245.9 239.0 254.3 220.0 269.5 186.2 237.3 232.2 245.0 213.8 259.5 180.8 228.4 225.2 235.5 207.4 249.2 175.1

90 256.5 254.0 262.9 239.5 274.3 214.3 247.7 246.8 253.5 232.9 264.3 208.2 238.5 238.5 243.9 226.0 254.0 202.0

75 232.4 206.1 247.9 165.7 269.7 96.6 223.5 200.0 238.2 160.5 259.1 92.4 214.4 193.6 228.2 155.0 248.3 87.9

80 241.7 229.8 252.0 202.0 271.5 153.8 232.8 223.0 242.4 196.0 261.0 148.6 223.7 216.1 232.5 189.9 250.3 143.3

85 252.3 248.5 259.5 228.5 273.4 193.7 243.3 241.3 249.9 221.9 263.0 187.8 234.1 233.9 240.0 215.2 252.4 181.8

90 263.5 263.5 268.9 249.0 279.2 222.8 254.3 254.3 259.1 241.9 268.8 216.4 244.8 244.8 249.1 234.7 258.1 209.8

75 235.6 212.3 249.6 170.5 269.8 99.9 226.4 205.7 239.5 164.9 260.5 95.3 217.0 199.0 229.2 159.1 249.2 90.5

80 245.9 237.0 254.9 208.1 272.8 158.6 236.7 229.9 244.9 201.7 262.0 153.1 227.2 222.6 234.6 195.2 250.9 147.4

85 257.3 256.6 263.3 235.7 275.9 199.7 247.9 247.9 253.3 228.7 265.1 193.5 238.3 238.3 243.1 221.6 254.1 187.1

90 269.1 269.1 273.5 257.1 282.7 229.9 259.5 259.5 263.4 249.6 271.9 223.2 249.6 249.6 253.0 242.0 260.9 216.2

75 237.5 217.0 249.9 174.0 271.0 101.8 228.0 210.1 240.5 167.9 261.3 96.8 218.1 203.0 229.8 161.7 252.3 91.6

11000

80 248.8 242.8 256.3 212.8 274.0 162.0 239.2 235.3 246.0 206.1 263.6 156.1 229.3 227.7 235.4 199.2 253.4 150.1

85 260.9 260.9 265.8 241.4 277.0 204.4 251.2 251.2 255.4 234.1 265.9 197.9 241.2 241.2 244.8 226.6 254.5 191.1

90 273.3 273.3 276.7 263.8 284.7 235.7 263.3 263.3 266.2 256.0 273.6 228.5 253.1 253.1 255.4 248.0 262.2 221.2

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 5000, 6000, and 7000 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 75

Performance Data

Table 44. Gross cooling capacities 25 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD300G3,4,W (Digit 22 = B)

Air

Flow cfm (a)

5000

6500

8000

9000

10000

10500

11000

85

Ambient Temperature

95 105

Ent Entering Wet Bulb

DB 61 67 73 61 67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 237.6 170.2 266.9 137.2 298.3 101.7 226.6 164.3 254.2 130.9 284.0 95.4 215.0 158.1 241.1 124.7 269.5 89.1

80 237.8 197.2 266.6 164.6 298.3 130.4 226.8 191.3 254.2 158.7 284.5 124.4 215.2 184.8 241.2 152.8 269.5 117.9

85 238.0 223.6 266.8 192.2 298.3 157.9 227.3 217.6 254.4 186.3 284.5 150.8 216.0 211.0 241.3 180.0 269.3 145.0

90 244.4 244.4 267.0 219.3 298.3 185.7 235.5 235.5 254.6 213.1 284.2 179.6 226.0 225.9 241.7 206.9 269.5 173.2

75 251.7 194.9 281.3 151.1 313.6 103.1 239.4 188.7 267.3 144.8 297.7 96.7 226.4 182.1 252.8 138.0 281.0 90.0

80 252.2 230.1 281.5 185.9 313.9 142.8 239.8 223.7 267.7 179.8 299.0 134.7 227.0 216.7 253.1 173.7 281.5 129.6

85 257.9 257.7 282.0 223.2 313.7 176.7 248.0 247.9 268.2 217.0 297.6 170.9 237.2 237.2 253.6 210.5 281.8 163.8

90 272.5 272.4 282.5 258.1 314.3 213.5 262.0 261.9 268.8 251.7 298.7 207.5 250.8 250.7 254.4 244.6 282.3 201.7

75 260.7 217.8 290.3 162.9 322.7 103.2 247.6 211.8 276.0 155.2 305.8 96.6 233.7 205.3 260.1 149.5 288.2 90.1

80 262.3 259.5 291.1 207.3 323.0 153.7 249.7 247.8 276.3 201.2 306.2 146.9 238.4 236.1 260.8 195.0 288.7 139.6

85 277.8 277.7 291.9 252.8 324.9 192.8 266.3 266.3 277.0 246.3 307.1 188.1 254.2 254.2 261.6 239.2 289.8 182.0

90 293.7 293.6 293.9 292.8 324.5 241.9 281.8 281.8 280.5 277.0 307.8 235.5 269.1 269.1 269.3 268.3 290.6 229.1

75 265.2 233.5 294.9 170.4 326.8 103.2 251.5 226.7 279.5 163.8 309.5 97.1 237.2 219.2 263.4 156.9 291.4 90.9

80 269.5 264.6 294.7 223.9 328.3 159.2 259.7 259.5 280.4 215.9 310.2 152.6 247.7 247.6 264.4 209.5 292.4 145.4

85 288.2 288.1 296.6 271.4 328.6 206.7 276.1 275.9 281.4 264.7 311.4 201.1 263.2 263.2 265.9 256.5 293.6 196.0

90 302.2 301.5 303.9 299.6 329.4 260.3 292.3 292.2 292.9 292.7 311.8 255.6 278.9 278.9 279.6 279.5 294.5 248.5

75 268.8 247.3 298.4 178.1 330.1 104.0 254.7 240.1 282.6 171.2 312.4 98.0 240.0 233.0 266.2 164.6 293.6 91.6

80 279.8 279.8 299.5 236.4 331.3 165.7 267.6 267.5 284.2 228.6 313.0 159.1 254.0 254.5 267.3 223.1 295.4 151.0

85 297.2 297.2 300.7 289.4 332.4 221.0 284.4 284.3 285.0 281.9 314.7 215.8 270.9 270.7 269.0 265.0 296.6 209.8

90 315.0 315.0 315.6 315.6 333.5 279.6 301.5 301.5 302.1 301.9 316.4 271.6 287.3 287.2 287.9 287.6 297.7 265.0

75 270.3 254.1 300.1 181.8 332.2 103.2 256.1 246.9 283.8 175.0 313.4 98.3 241.2 239.6 267.4 168.8 294.6 91.9

80 283.5 283.4 301.2 243.4 332.8 168.0 271.0 270.7 285.1 236.6 314.6 149.6 257.8 257.6 268.5 229.6 296.6 153.9

85 301.2 301.2 302.5 297.8 334.1 228.5 287.5 287.2 286.5 283.2 316.3 222.6 274.3 274.2 271.3 263.2 297.9 216.4

90 319.3 319.3 320.0 319.8 335.2 288.2 305.5 305.3 306.2 305.9 317.5 280.7 291.0 290.9 291.6 291.5 299.1 272.8

75 271.7 260.7 301.5 185.8 332.6 105.1 257.3 253.5 285.1 179.1 314.5 98.9 242.4 239.2 268.5 173.1 295.9 92.6

80 287.0 286.7 302.6 250.0 334.2 170.7 273.9 273.7 286.4 243.2 316.9 162.5 260.6 260.6 269.7 235.9 297.6 156.7

85 305.1 304.9 304.5 304.2 335.6 235.1 291.3 291.2 288.4 280.2 317.6 229.0 277.4 277.4 274.0 262.8 299.1 222.8

90 323.4 323.3 324.1 323.8 336.7 295.8 309.2 309.1 309.9 309.7 318.9 288.2 294.5 294.5 295.1 295.0 300.4 280.4

76 RT-PRC043AC-EN

Performance Data

Table 44. Gross cooling capacities 25 tons three phase dehumidification (hot gas reheat) option high efficiency

T/YHD300G3,4,W (Digit 22 = B)

Air

Flow cfm

(a)

5000

115

Ambient Temperature

120 125

Ent

DB 61 67 73 61

Entering Wet Bulb

67 73 61 67 73

(°F) MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC MBh SHC

75 202.6 151.6 227.5 118.5 253.9 82.4 196.1 148.2 220.0 114.8 245.8 79.0 189.5 144.9 212.3 111.2 237.3 75.6

80 202.9 178.2 227.2 145.7 253.8 111.3 196.5 175.0 220.0 142.3 245.6 107.9 189.8 171.5 212.6 138.9 237.3 104.5

85 204.6 203.6 227.5 173.3 253.9 138.4 199.2 199.2 220.4 170.0 245.9 135.1 193.9 193.9 213.0 166.6 237.6 131.8

90 215.9 215.9 227.9 200.1 254.2 166.7 210.6 210.6 220.7 196.6 246.2 163.4 205.0 204.9 213.3 193.2 237.9 160.1

75 212.7 175.3 237.9 130.0 264.1 83.1 205.6 171.9 229.7 127.2 255.2 79.7 198.4 168.5 221.5 123.5 246.0 76.1

6500

8000

9000

10000

10500

80 214.0 209.1 238.0 167.4 264.3 122.8 207.2 205.4 230.1 164.0 255.6 119.4 200.5 199.9 222.1 160.6 246.4 116.0

85 225.8 225.7 238.7 203.5 265.1 157.2 219.7 219.6 230.7 199.9 256.2 153.7 213.5 213.5 222.7 196.3 247.2 150.4

90 238.9 238.9 240.2 236.6 265.6 195.5 232.7 232.6 232.7 232.0 256.8 192.1 226.1 226.1 226.1 225.3 247.8 188.5

75 219.2 198.0 244.4 141.6 269.9 83.7 211.7 194.1 235.6 139.0 260.8 80.6 204.1 190.2 227.1 135.5 251.1 77.2

80 227.1 227.0 244.7 188.9 271.1 132.5 220.8 220.8 236.4 185.6 261.6 128.7 214.1 214.1 227.9 182.0 252.2 125.1

85 241.4 241.3 245.6 232.1 271.9 176.3 234.7 234.6 237.3 228.3 262.7 173.5 227.8 227.7 228.8 224.1 253.2 170.8

90 255.9 255.8 256.4 256.2 272.7 223.1 248.8 248.8 249.4 249.3 263.5 219.9 241.6 241.6 242.1 242.1 254.1 216.4

75 222.3 211.8 247.1 150.1 272.7 84.4 214.6 208.1 238.5 146.8 263.2 81.0 206.8 204.1 229.7 143.2 253.2 77.4

80 234.7 234.5 247.9 202.7 274.0 137.8 228.0 227.7 239.4 199.2 265.6 132.5 220.9 220.7 230.7 195.4 255.1 130.9

85 249.7 249.5 249.2 248.6 275.2 190.4 242.6 242.5 241.3 238.4 265.8 187.3 235.2 235.1 233.6 228.6 256.1 184.1

90 264.8 264.8 265.3 265.1 276.2 241.1 257.5 257.3 258.0 257.7 266.8 237.2 249.8 249.7 250.3 250.1 257.1 233.0

75 224.8 224.5 249.4 158.3 274.8 84.8 217.2 214.2 240.6 155.1 265.0 81.9 209.8 204.0 231.7 152.2 254.7 80.2

80 241.0 241.0 250.5 215.8 277.5 141.3 233.9 233.9 241.8 212.1 267.0 140.3 226.6 226.4 232.8 208.4 257.0 136.7

85 256.6 256.6 254.1 246.2 277.8 203.4 249.2 249.2 247.5 240.9 268.3 200.1 241.5 241.4 241.8 241.5 258.3 196.6

90 272.5 272.5 272.9 272.9 279.0 256.9 264.7 264.7 265.2 265.1 269.4 252.9 256.6 256.6 257.1 256.9 259.5 249.1

75 226.2 222.1 250.4 162.6 275.7 85.3 218.8 211.8 241.5 159.9 265.6 83.7 211.7 204.3 232.6 157.1 255.4 82.4

80 243.8 243.8 251.6 222.3 277.7 147.0 236.6 236.4 242.8 218.6 268.0 143.5 229.1 228.8 234.2 213.6 258.0 140.1

85 259.7 259.7 258.1 251.8 279.0 209.7 252.1 251.9 252.5 252.2 269.3 206.4 244.3 244.1 244.7 244.3 259.3 203.0

90 275.9 275.8 276.3 276.2 280.7 263.7 267.9 267.8 268.4 268.1 270.5 261.0 259.7 259.6 260.1 259.8 260.6 257.1

75 227.7 219.7 251.2 167.7 276.4 87.2 220.8 212.4 242.4 164.9 266.3 86.0 214.6 210.1 233.3 161.8 256.1 84.1

11000

80 246.4 246.2 252.6 228.5 278.6 149.9 239.1 238.8 243.7 224.6 268.8 146.8 231.5 231.3 234.6 220.7 259.6 141.2

85 262.6 262.4 263.0 262.6 280.5 214.9 254.8 254.6 255.2 254.9 270.2 212.8 246.9 246.7 247.2 246.9 260.2 209.1

90 279.0 278.9 279.5 279.2 281.4 272.9 270.9 270.8 271.3 271.0 271.6 269.0 262.5 262.4 263.0 262.8 261.5 258.0

Notes:

1.

All capacities shown are gross and have not considered indoor fan heat. To obtain NET cooling capacity subtract indoor fan heat. For indoor fan heat formula, refer to appropriate airflow table notes.

2.

MBh = Total Gross Capacity

3.

SHC = Sensible Heat Capacity

4.

*Indicates both downflow and horizontal units.

(a)For 5000, 6000, and 7000 cfm-Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 77

Performance Data

Table 45. Evaporator fan performance 12½ tons TSD150G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive 3-hp Standard Motor & Drive

4000 461 0.60

522 0.79

575 0.98

624 1.18

667 1.37

707 1.56

743 1.75

773 1.90

802 2.05

4500 410 0.51

485 0.74

545 0.95

598 1.17

645 1.39

688 1.60

728 1.82

765 2.04

800 2.25

833 2.47

5000 437 0.64

509 0.89

569 1.14

621 1.38

667 1.62

710 1.86

749 2.10

786 2.34

821 2.58

853 2.82

5500 465 0.79

535 1.08

593 1.35

644 1.62

690 1.88

732 2.14

771 2.41

807 2.67

842 2.94

874 3.20

6000 493 0.97

561 1.28

618 1.58

668 1.87

713 2.16

754 2.45

793 2.75

829 3.03

863 3.31 896 (a)

3-hp Standard Motor & High Static Drive

3.60

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive

4000 826 2.17

856 2.33

880 2.47

902 2.60

923 2.72

944 2.84

963 2.96

982 3.08 1002 3.20

1021 3.32

4500 858 2.64

888 2.82

909 2.96

932 3.11

958 3.29

981 3.46 1000 3.59 1020 3.73 1038 3.87

1056 4.00

5000 885 3.06

916 3.31

941 3.51

963 3.69

991 3.89 1010 4.06 1029 4.22 1051 4.40 1074 4.60

1094 4.78

5500 906 3.46

936 3.73

965 4.00

993 4.26 1019 4.53 1040 4.73 1061 4.93 1087 5.15 1104 5.34

1122 5.52

6000 927 3.89

957 4.18

986 4.47 1014 4.76 1041 5.06 1066 5.34 1091 5.64

-

5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

8.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)5-hp Oversized Motor & Drive

78 RT-PRC043AC-EN

Performance Data

Table 46. Evaporator fan performance 12½ tons TSH150G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

4000

4500

-

-

3-hp Standard Motor & Low Static Drive

-

-

3-hp Standard Motor & Drive

3 hp

Standard

Motor & High

Static Drive

494 0.80

558 1.02

613 1.23

662 1.44

707 1.64

749 1.84

787 2.04

824 2.24

851 2.40

521 1.00

584 1.26

638 1.50

686 1.74

731 1.98

772 2.21

811 2.43

847 2.66

882 2.88

5000 475 0.92

549 1.24

610 1.53

663 1.80

711 2.08

756 2.34

797 2.61

835 2.86

871 3.12

905 3.37

5500 506 1.15

578 1.50

637 1.83

690 2.15

737 2.45

781 2.75

821 3.04

859 3.34

895 3.62

929 3.91

6000 538 1.42

607 1.81

666 2.18

717 2.53

764 2.87

807 3.20

846 3.52

884 3.85

920 4.17

953 4.48

5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive

4000 882 2.63

909 2.80

935 2.99

961 3.19

991 3.42 1017 3.65 1043 3.88 1069 4.12 1093 4.35

1116 4.58

4500 915 3.10

941 3.27

968 3.53

994 3.75 1016 3.94 1042 4.18 1063 4.36 1090 4.62 1117 4.89

1139 5.13

5000 938 3.62

969 3.86

999 4.11 1029 4.36 1049 4.52 1074 4.82 1100 5.10 1118 5.28 1141 5.54

1162 5.77

5500 961 4.18

993 4.46 1022 4.73 1051 5.00 1080 5.28 1107 5.55

-

6000 986 4.79 1016 5.09 1046 5.40 1076 5.71

-

5-hp Oversized Motor & Drive

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

8.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

RT-PRC043AC-EN 79

Performance Data

Table 47. Evaporator fan performance 12½ tons with gas heat YSD150G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive 3-hp Standard Motor & Drive

4000 511 0.75

559 0.92

601 1.08

639 1.24

673 1.40

706 1.56

736 1.71

763 1.85

793 2.00

816 2.12

4500 562 1.02

607 1.21

647 1.40

683 1.58

717 1.76

748 1.94

777 2.11

805 2.29

831 2.46

854 2.61

5000 614 1.35

656 1.56

694 1.77

729 1.98

761 2.18

791 2.38

820 2.57

847 2.77

873 2.97

898 3.17

5500 667 1.74

706 1.98

742 2.21

776 2.44

807 2.67

836 2.89

863 3.11

890 3.32

915 3.55

940 3.76

6000 720 2.21

757 2.48

791 2.73

823 2.98

853 3.23

881 3.47

908 3.72

934 3.96

959 4.20

982 4.43

3-hp Standard Motor & High Static Drive 5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive

4000 844 2.27

868 2.41

889 2.52

910 2.64

929 2.76

948 2.87

967 2.98

986 3.10 1003 3.21

1020 3.32

4500 883 2.78

905 2.93

926 3.07

951 3.24

973 3.40

993 3.54 1011 3.67 1028 3.79 1047 3.93

1064 4.06

5000 921 3.36

942 3.52

967 3.72

990 3.89 1009 4.05 1027 4.20 1051 4.39 1072 4.59 1091 4.75

1107 4.89

5500 962 3.97

985 4.19 1006 4.40 1027 4.60 1046 4.79 1069 5.00 1090 5.18 1108 5.37 1123 5.53

1144 5.72

6000 1005 4.67 1026 4.90 1048 5.14 1069 5.38 1089 5.61

-

5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

8.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

80 RT-PRC043AC-EN

Performance Data

Table 48. Evaporator fan performance 12½ tons with gas heat YSH150G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low

Static Drive

3-hp Standard Motor & Drive

3-hp

Standard

Motor & High

Static Drive

4000 562 1.04

610 1.22

653 1.40

692 1.57

727 1.74

760 1.90

791 2.06

820 2.22

842 2.34

875 2.58

4500 619 1.42

665 1.63

705 1.84

742 2.03

776 2.23

808 2.42

838 2.60

866 2.78

893 2.95

920 3.14

5000 678 1.88

720 2.13

758 2.36

793 2.58

826 2.80

857 3.02

886 3.23

914 3.43

940 3.64

966 3.84

5500 737 2.45

776 2.72

813 2.98

846 3.23

877 3.48

907 3.72

935 3.96

963 4.19

988 4.42

1013 4.64

6000 796 3.12

834 3.42

868 3.71

900 3.99

930 4.26

959 4.53

986 4.79 1012 5.05 1037 5.31

1062 5.56

5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive

4000 900 2.74

926 2.93

952 3.11

981 3.34 1008 3.56 1032 3.78 1057 4.01 1079 4.22 1102 4.45

1127 4.70

4500 939 3.26

967 3.53

992 3.74 1014 3.92 1037 4.13 1060 4.34 1085 4.57 1110 4.82 1134 5.07

1156 5.33

5000 990 4.03 1014 4.23 1035 4.41 1051 4.54 1079 4.89 1102 5.12 1121 5.31 1142 5.54

-

5500 1037 4.87 1060 5.08 1082 5.30 1104 5.52 1125 5.73

6000 -

-

-

-

-

-

-

5-hp Oversized Motor & Drive

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

8.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

RT-PRC043AC-EN 81

Performance Data

Table 49. Evaporator fan performance 15 tons TSD180G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor Drive

4800

5400

-

-

-

-

385 0.83

419 0.95

455 1.11

486 1.28

517 1.48

545 1.63

571 1.78

596 1.92

620 2.05

415 1.06

450 1.25

478 1.39

510 1.57

538 1.75

565 1.98

592 2.18

616 2.35

640 2.51

6000 387 1.03

447 1.38

477 1.59

507 1.75

533 1.92

562 2.12

588 2.30

613 2.55

637 2.82

660 3.02

6600 411 1.28

472 1.71

507 1.94

536 2.19

562 2.36

585 2.55

612 2.77

635 2.97

658 3.19

681 3.49

7200 436 1.58

496 2.05

539 2.41

564 2.64

591 2.89

614 3.07

635 3.28

659 3.51

682 3.74

703 3.96

5-hp Oversized Motor & Drive

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Drive 3HP Standard Motor & High Static Drive

4800 643 2.19

664 2.32

685 2.44

705 2.57

724 2.69

743 2.81

761 2.93

779 3.05

797 3.16

813 3.27

5400 662 2.67

683 2.82

704 2.98

724 3.12

743 3.27

762 3.41

780 3.55

798 3.70

816 3.84

832 3.97

6000 682 3.20

704 3.38

724 3.56

744 3.73

763 3.91

782 4.07

800 4.24

817 4.40

835 4.57

851 4.73

6600 703 3.78

724 3.99

744 4.19

764 4.40

783 4.59

802 4.79

819 4.98

836 5.16

853 5.35

871 5.54

7200 725 4.24

745 4.56

765 4.89

784 5.11

803 5.34

822 5.56

840 5.78

857 6.00

873 6.20

890 6.42

5-hp Oversized Motor & Drive 7.5hp OS Motor & High Static Drive (a)

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 89, p. 119

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 90, p. 121

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 91, p. 121 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 92, p. 122 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)7.5HP high static oversized motor offering is field installed only.

82 RT-PRC043AC-EN

Performance Data

Table 50. Evaporator fan performance 15 tons TSH180G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive 3-hp Standard Motor & Drive

4800 420 0.77

453 0.91

481 1.05

508 1.18

532 1.31

563 1.47

587 1.61

614 1.77

638 1.93

658 2.08

5400 464 1.06

494 1.22

521 1.37

546 1.52

570 1.67

592 1.81

619 2.00

642 2.15

664 2.32

687 2.50

6000 509 1.41

537 1.59

562 1.76

586 1.93

609 2.09

629 2.26

649 2.42

669 2.58

695 2.80

716 2.97

6600 554 1.83

580 2.03

604 2.22

627 2.41

648 2.59

668 2.78

687 2.96

706 3.14

724 3.32

745 3.53

7200 599 2.34

624 2.56

647 2.77

668 2.97

689 3.18

708 3.38

727 3.58

744 3.77

762 3.97

778 4.17

5-hp Oversized Motor & Standard Drive

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor &

Drive

3HP Standard Motor & High Static Drive

4800 678 2.23

698 2.39

719 2.55

738 2.71

756 2.88

774 3.05

791 3.22

808 3.38

825 3.56

841 3.73

5400 709 2.67

728 2.84

747 3.02

764 3.19

782 3.37

800 3.55

818 3.73

835 3.91

851 4.10

868 4.30

6000 735 3.16

757 3.36

777 3.55

796 3.75

812 3.93

828 4.12

844 4.32

860 4.52

877 4.73

893 4.92

6600 767 3.75

785 3.93

804 4.14

822 4.35

841 4.57

860 4.79

876 5.00

891 5.20

907 5.42

920 5.63

7200 794 4.36

815 4.61

835 4.86

852 5.05

869 5.27

886 5.50

902 5.73

921 5.98

937 6.20

952 6.43

5-hp Oversized Motor & Standard Drive 7.5hp OS Motor & High Static Drive (a)

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 89, p. 119

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 90, p. 121

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 91, p. 121 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 92, p. 122 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)7.5HP high static oversized motor offering is field installed only.

RT-PRC043AC-EN 83

Performance Data

Table 51. Evaporator fan performance 15 tons with gas heat YSD180G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive 3-hp Standard Motor & Drive

4800 379 0.80

415 0.93

449 1.08

484 1.26

513 1.46

544 1.63

573 1.79

600 1.94

627 2.09

651 2.24

5400 417 1.07

450 1.25

480 1.41

512 1.58

543 1.79

568 2.01

596 2.21

623 2.39

648 2.57

673 2.74

6000 456 1.43

486 1.64

515 1.80

542 1.98

571 2.18

599 2.41

622 2.65

645 2.89

671 3.10

695 3.30

6600 496 1.86

524 2.11

550 2.28

576 2.47

600 2.67

626 2.89

653 3.13

674 3.40

695 3.68

718 3.93

7200 535 2.39

562 2.61

587 2.86

610 3.05

633 3.26

655 3.47

679 3.71

705 3.97

726 4.26

745 4.57

5hp Oversized Motor & Low

Static Drive

5hp Oversized Motor & Standard Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Drive 3-hp Standard Motor & High Static Drive

4800 674 2.38

697 2.52

719 2.66

739 2.78

759 2.92

779 3.04

797 3.16

816 3.29

834 3.41

851 3.52

5400 696 2.92

718 3.08

740 3.24

760 3.40

780 3.55

799 3.71

819 3.86

837 4.01

854 4.15

872 4.29

6000 718 3.50

740 3.70

761 3.89

782 4.08

801 4.25

821 4.44

840 4.61

857 4.78

876 4.96

893 5.13

6600 740 4.15

762 4.38

783 4.59

803 4.81

824 5.02

842 5.22

861 5.44

880 5.64

896 5.83

914 6.03

7200 764 4.87

785 5.13

806 5.38

826 5.61

846 5.86

864 6.09

883 6.32

901 6.55

918 6.78

935 7.00

5-hp Oversized Motor & Standard Drive 7.5hp Oversized Motor & High Static Drive (a)

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 89, p. 119

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 90, p. 121

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 91, p. 121 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 92, p. 122 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating ranges.

(a)7.5HP high static oversized motor offering is field installed only.

84 RT-PRC043AC-EN

Performance Data

Table 52. Evaporator fan performance 15 tons with gas heat YSH180G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive 3-hp Standard Motor & Drive

4800 419 0.77

455 0.92

487 1.07

515 1.22

548 1.39

578 1.55

607 1.73

634 1.90

659 2.08

681 2.26

5400 462 1.05

496 1.22

526 1.39

553 1.56

578 1.72

603 1.89

635 2.10

661 2.29

687 2.49

711 2.68

6000 506 1.39

537 1.59

566 1.78

592 1.97

616 2.15

639 2.33

661 2.52

690 2.76

713 2.95

736 3.17

6600 550 1.81

579 2.03

606 2.24

631 2.45

654 2.65

677 2.86

698 3.06

717 3.25

738 3.46

766 3.74

7200 595 2.30

622 2.54

648 2.77

671 3.00

694 3.23

715 3.46

735 3.68

755 3.89

773 4.11

791 4.33

5hp Oversized Motor & Low Static Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor &

Drive

3-hp Standard Motor & High Static Drive

4800 704 2.44

728 2.63

750 2.83

772 3.03

793 3.23

813 3.43

833 3.64

852 3.85

872 4.07

890 4.28

5400 732 2.88

753 3.08

774 3.29

795 3.49

815 3.70

835 3.92

855 4.15

874 4.38

892 4.60

911 4.84

6000 761 3.40

783 3.61

803 3.82

822 4.04

841 4.27

859 4.50

877 4.73

896 4.95

914 5.18

933 5.44

6600 787 3.95

809 4.20

830 4.45

850 4.68

870 4.92

887 5.15

905 5.39

921 5.64

939 5.90

955 6.15

7200 814 4.60

838 4.88

856 5.11

876 5.37

896 5.64

916 5.91

934 6.16

951 6.42

968 6.68

983 6.93

5-hp Oversized Motor & Standard Drive 7.5hp Oversized Motor & High Static Drive (a)

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 89, p. 119

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 90, p. 121

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 91, p. 121 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 92, p. 122 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating ranges.

(a)7.5HP high static oversized motor offering is field installed only.

RT-PRC043AC-EN 85

Performance Data

Table 53. Evaporator fan performance 17½ tons TSD210/211G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory

5600 424 1.01

474 1.31

509 1.52

540 1.72

567 1.87

594 2.08

620 2.26

643 2.43

664 2.60

6300 392 001 450 1.27

498 1.60

541 1.93

572 2.16

599 2.39

622 2.55

648 2.75

671 2.99

695 3.20

7000 421 001 477 1.56

524 1.93

566 2.30

603 2.67

631 2.93

656 3.16

679 3.40

700 3.57

723 3.80

7700 451 001 505 1.90

551 2.31

591 2.72

628 3.12

662 3.53

689 3.84

711 4.06

733 4.37

752 4.58

8400 482 002 533 2.30

578 2.75

617 3.20

653 3.64

687 4.09

718 4.53

745 4.91

764 5.13

785 5.42

5-hp Standard Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive

5600 685 2.77

705 2.93

724 3.09

743 3.26

761 3.42

778 3.58

795 3.73

812 3.90

828 4.06

843 4.20

6300 715 3.39

734 3.58

753 3.76

772 3.96

790 4.14

807 4.33

824 4.51

840 4.69

856 4.87

871 5.04

7000 744 4.08

765 4.31

784 4.52

802 4.74

820 4.95

837 5.16

853 5.37

870 5.58

885 5.78

901 5.98

7700 772 4.77

792 5.02

812 5.34

831 5.60

850 5.85

867 6.09

884 6.32

900 6.56

914 6.78

930 7.01

8400 805 5.76

822 5.96

841 6.17

860 6.45

878 6.77

895 7.09

913 7.37

930 7.64

945 7.88

961 8.15

7.5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

86 RT-PRC043AC-EN

Performance Data

Table 54. Evaporator fan performance 17½ tons TSH210/211G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive

5600 439 1.10

487 1.40

530 1.68

568 1.98

591 2.10

614 2.32

634 2.53

654 2.76

673 2.98

692 3.20

6300 477 1.45

531 1.85

567 2.15

603 2.46

637 2.80

658 2.91

678 3.15

698 3.40

716 3.64

734 3.89

7000 517 1.87

571 2.36

605 2.70

641 3.05

672 3.39

703 3.78

725 3.97

742 4.15

760 4.42

777 4.69

7700 557 2.38

609 2.92

649 3.38

676 3.73

710 4.12

738 4.49

765 4.90

790 5.28

805 5.32

822 5.61

8400 598 2.97

647 3.57

690 4.16

719 4.54

745 4.95

776 5.38

801 5.78

826 6.20

852 6.67

868 6.88

5-hp Standard Motor & Drive 7.5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive

5-hp Standard Motor &

High Static Drive

5600 709 3.42

726 3.65

743 3.88

759 4.11

774 4.34

789 4.57

803 4.81

817 5.05

831 5.28

845 5.54

6300 751 4.14

767 4.39

783 4.64

798 4.89

814 5.15 829 (a) 5.41

843 5.67

857 5.92

870 6.18

884 6.46

7000 794 4.97

810 5.24

825 5.51

840 5.79

855 6.07

870 6.35

884 6.63

897 6.92

911 7.20

924 7.48

7700 838 5.92

854 6.22

869 6.52

883 6.81

898 7.13

912 7.43

925 7.72

939 8.04

952 8.34

8400 883 7.00

898 7.32

913 7.65

927 7.98

941 8.31

954 8.62

-

-

-

-

-

7.5-hp Oversized Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)5-hp Standard Motor & High Static Drive

RT-PRC043AC-EN 87

Performance Data

Table 55. Evaporator fan performance 17½ tons with gas heat YSD210/211G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive

5600 434 1.07

472 1.30

504 1.49

533 1.68

560 1.82

585 2.01

611 2.20

634 2.37

655 2.53

676 2.69

6300 478 1.45

514 1.71

546 1.97

571 2.15

598 2.37

622 2.55

645 2.71

668 2.96

691 3.16

711 3.35

7000 522 1.92

556 2.21

587 2.50

615 2.79

636 2.96

660 3.20

683 3.43

703 3.59

724 3.81

745 4.09

7700 568 2.48

599 2.81

628 3.13

655 3.45

680 3.75

699 3.93

720 4.18

742 4.47

761 4.67

779 4.85

8400 614 3.15

643 3.52

671 3.87

696 4.21

720 4.56

742 4.88

760 5.08

780 5.32

799 5.67 818 (a) 5.92

5-hp Standard Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive

5-hp Standard Motor &

High Static Drive

5600 695 2.85

714 3.01

732 3.16

750 3.32

766 3.47

783 3.62

799 3.77

814 3.92

830 4.07

845 4.22

6300 730 3.53

748 3.71

766 3.90

783 4.07

800 4.25

816 4.42

832 4.60

847 4.77

862 4.94

876 5.11

7000 765 4.31

784 4.53

801 4.73

818 4.93

834 5.13

850 5.33

866 5.53

881 5.73

896 5.93

910 6.11

7700 798 5.11

817 5.41

836 5.67

854 5.90

870 6.12

886 6.36

901 6.58

916 6.79

930 7.02

945 7.24

8400 835 6.11

852 6.31

870 6.62

886 6.94

904 7.22

921 7.50

937 7.75

952 8.00

966 8.24

980 8.49

7.5-hp Oversized Motor & Drive 7.5-hp Oversized Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)7.5-hp Oversized Motor & Drive

88 RT-PRC043AC-EN

Performance Data

Table 56. Evaporator fan performance 17½ tons with gas heat YSH210/211G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive 5-hp Standard Motor & Drive

5600 479 1.35

523 1.63

560 1.91

584 2.03

607 2.25

630 2.48

651 2.72

671 2.95

690 3.18

709 3.42

6300 531 1.85

566 2.14

604 2.47

637 2.79

655 2.87

677 3.13

697 3.39

716 3.64

735 3.91

753 4.17

7000 583 2.48

613 2.80

649 3.14

678 3.47

709 3.85

726 3.96

744 4.17

763 4.46

780 4.74

798 5.03

7700 636 3.24

662 3.55

692 3.91

726 4.33

750 4.67

779 5.11

795 5.31

810 5.40

827 5.72

844 6.03

8400 687 4.11

713 4.45

739 4.87

768 5.26

798 5.73

819 6.08

846 6.57

864 6.90

875 6.84 891 (a) 7.17

7.5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive

5-hp Standard Motor &

High Static Drive

5600 727 3.66

744 3.91

761 4.15

777 4.39

793 4.65

808 4.88

823 5.13

837 5.39

851 5.64

865 5.90

6300 770 4.44

787 4.70

803 4.96

819 5.23

835 5.51

849 5.78

864 6.06

878 6.33

892 6.61

905 6.88

7000 815 5.33

831 5.62

847 5.91

862 6.20

877 6.50

892 6.80

906 7.10

920 7.41

933 7.70

947 8.01

7700 860 6.35

876 6.67

892 7.00

907 7.31

921 7.63

935 7.95

949 8.27

963 8.60

8400 907 7.52

922 7.86

937 8.21

952 8.56

-

7.5-hp Oversized Motor & High Static Drive

-

-

-

-

-

-

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

(a)7.5-hp Oversized Motor & High Static Drive

RT-PRC043AC-EN 89

Performance Data

Table 57. Evaporator fan performance 20 tons TSD240G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive 5-hp Standard Motor & Drive

6400 473 1.55

504 1.76

533 1.96

560 2.15

585 2.33

609 2.51

633 2.69

656 2.89

677 3.10

699 3.31

7200 525 2.18

553 2.41

579 2.58

605 2.85

628 3.05

651 3.25

673 3.46

694 3.65

715 3.86

735 4.08

8000 577 2.95

603 3.14

627 3.42

651 3.62

674 3.93

695 4.15

715 4.36

735 4.59

755 4.82

774 5.04

8800 629 3.89

653 4.06

676 4.40

698 4.63

719 4.87

740 5.21

759 5.46

778 5.69

796 5.94

814 6.19

9600 682 5.02

704 5.20

726 5.48

747 5.84

766 6.06

785 6.35

805 6.72

823 7.01

840 7.26

857 7.52

7.5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive

6400 721 3.53

742 3.75

762 3.96

782 4.17

802 4.39

819 4.59

837 4.81

855 5.02

872 5.22

889 5.44

7200 754 4.32

774 4.56

793 4.80

813 5.05

832 5.30

850 5.54

868 5.78

884 6.01

902 6.26

918 6.49

8000 793 5.27

810 5.51

828 5.77

845 6.03

862 6.29

881 6.58

898 6.84

916 7.12

932 7.39

948 7.65

8800 832 6.44

849 6.69

866 6.93

883 7.20

899 7.47

915 7.75

930 8.03

947 8.35

9600 873 7.78

889 8.06

905 8.33

-

-

-

-

-

-

-

-

-

7.5-hp Oversized Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

90 RT-PRC043AC-EN

Performance Data

Table 58. Evaporator fan performance 20 tons TSH240G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive 5-hp Standard Motor & Drive

6400 503 1.62

541 1.88

570 2.13

611 2.42

635 2.64

658 2.86

680 3.08

701 3.30

721 3.51

740 3.73

7200 555 2.20

590 2.52

620 2.81

648 3.10

685 3.43

707 3.68

729 3.93

749 4.17

768 4.42

786 4.67

8000 607 2.91

642 3.32

673 3.63

695 3.94

722 4.27

757 4.64

778 4.93

797 5.21

816 5.48

834 5.76

8800 660 3.76

695 4.25

721 4.60

748 4.97

768 5.30

793 5.66

826 6.09

847 6.42

865 6.72

883 7.03

9600 714 4.78

747 5.33

773 5.78

798 6.14

821 6.54

838 6.89

861 7.29

892 7.76

916 8.16

932 8.49

7.5-hp Oversized Motor & Drive

7.5-hp Oversized Motor & High Static

Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor &

Drive

5-hp Standard Motor & High Static Drive

6400 759 3.95

776 4.16

794 4.37

810 4.59

826 4.80

843 5.02

858 5.23

873 5.44

887 5.65

902 5.87

7200 805 4.91

822 5.15

838 5.39

855 5.64

871 5.88

886 6.12

901 6.35

916 6.60

931 6.84

944 7.07

8000 851 6.03

868 6.30

885 6.58

900 6.85

916 7.12

931 7.38

945 7.65

960 7.93

974 8.19

988 8.46

8800 899 7.33

916 7.63

932 7.94

947 8.24

962 8.53

-

9600 -

7.5-hp Oversized Motor & High Static Drive

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

RT-PRC043AC-EN 91

Performance Data

Table 59. Evaporator fan performance 20 tons with gas heat YSD240G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive 5-hp Standard Motor & Drive

6400 497 1.73

526 1.90

553 2.11

579 2.29

604 2.47

628 2.65

651 2.85

673 3.06

695 3.27

717 3.49

7200 552 2.39

578 2.58

603 2.82

627 3.04

650 3.24

672 3.45

694 3.65

715 3.86

735 4.09

754 4.32

8000 608 3.21

632 3.46

654 3.67

676 3.95

698 4.18

719 4.41

739 4.64

759 4.87

778 5.09

797 5.32

8800 664 4.20

686 4.52

707 4.71

727 5.00

747 5.30

767 5.56

786 5.80

804 6.06

822 6.31

840 6.56

9600 721 5.39

741 5.76

760 6.00

780 6.24

797 6.57

815 6.90

834 7.17

852 7.44

869 7.72

886 8.00

7.5-hp Oversized Motor & Drive 7.5-hp Oversized Motor &

High Static Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive

6400 739 3.71

759 3.92

779 4.14

798 4.35

817 4.57

835 4.78

852 4.98

869 5.19

887 5.41

903 5.62

7200 774 4.56

794 4.80

814 5.06

833 5.31

851 5.55

869 5.79

886 6.03

902 6.26

919 6.51

935 6.74

8000 815 5.57

832 5.83

849 6.10

868 6.38

886 6.65

903 6.92

920 7.19

937 7.47

953 7.74

969 8.00

8800 858 6.81

875 7.06

891 7.34

907 7.62

922 7.90

938 8.19

955 8.50

9600 902 8.27

918 8.53

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Oversized Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

92 RT-PRC043AC-EN

Performance Data

Table 60. Evaporator fan performance 20 tons with gas heat YSH240G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static 5-hp Standard Motor & Drive

6400 533 1.82

560 2.05

599 2.33

628 2.57

653 2.81

676 3.04

698 3.27

720 3.50

740 3.73

759 3.95

7200 592 2.54

620 2.82

643 3.04

680 3.37

705 3.64

727 3.91

748 4.17

769 4.43

789 4.70

807 4.95

8000 650 3.40

678 3.70

698 3.98

724 4.28

757 4.64

779 4.95

800 5.24

819 5.53

838 5.83

856 6.11

8800 709 4.45

736 4.77

758 5.15

774 5.39

801 5.77

832 6.17

852 6.50

871 6.82

889 7.14

907 7.47

9600 769 5.71

794 6.08

816 6.44

833 6.80

849

7.5-hp Oversized Motor & Standard Drive

7.08

876 7.53

904 7.95

924 8.32

-

7.5-hp Oversized Motor & High Static Drive

-

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive

6400 778 4.18

796 4.40

814 4.63

831 4.85

847 5.08

863 5.30

879 5.53

895 5.76

909 5.97

924 6.20

7200 825 5.21

843 5.46

861 5.72

876 5.96

893 6.22

909 6.48

924 6.74

939 6.99

953 7.23

968 7.49

8000 874 6.40

891 6.69

907 6.97

924 7.26

939 7.54

955 7.82

970 8.11

984 8.38

-

8800 924 7.79

941 8.11

957 8.43

9600 -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Oversized Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

9.

For 380V/60 Hz units, the oversized motor is used as the standard motor. Refer to “Motor & Sheave/Fan Speed” tables to determine operating range.

RT-PRC043AC-EN 93

Performance Data

Table 61. Evaporator fan performance 25 tons TSD300/301G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive 7.5-hp Standard Motor & Drive

7000 532 2.08

559 2.25

588 2.49

612 2.62

637 2.87

662 3.09

686 3.28

708 3.48

729 3.68

750 3.87

7500 566 2.52

593 2.73

618 2.95

642 3.12

665 3.33

689 3.59

712 3.82

734 4.03

755 4.24

775 4.45

8000 600 3.04

626 3.27

648 3.44

674 3.72

694 3.86

717 4.14

739 4.40

760 4.65

781 4.87

800 5.09

8500 635 3.62

659 3.87

680 4.03

705 4.35

725 4.52

745 4.72

766 5.03

787 5.31

807 5.57

826 5.80

9000 670 4.28

692 4.52

713 4.73

734 4.97

757 5.29

775 5.43

794 5.69

814 6.01

834 6.31

853 6.58

9500 705 5.00

725 5.24

747 5.51

764 5.68

787 6.07

806 6.28

823 6.44

842 6.76

861 7.10

880 7.41

10000 740 5.81

758 6.04

781 6.37

797 6.54

816 6.85

838 7.23

854 7.38

871 7.59

889 7.93

907 8.29

10500 775 6.71

793 6.93

813 7.27

831 7.50

847 7.72

868 8.16

886 8.43

902 8.59

-

11000 811 7.69

827 7.93

846 8.25

865 8.56

-

7.5-hp Standard Motor & High Static Drive

-

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

7000 769 4.05

788 4.24

806 4.42

824 4.60

841 4.78

858 4.95

874 5.12

890 5.29

906 5.46

920 5.62

7500 794 4.66

813 4.86

831 5.06

848 5.26

865 5.45

881 5.64

897 5.83

913 6.01

928 6.20

944 6.39

8000 819 5.31

837 5.54

855 5.76

873 5.97

889 6.18

905 6.39

921 6.60

937 6.80

952 7.00

967 7.21

8500 845 6.03

863 6.27

881 6.52

897 6.75

914 6.98

930 7.21

946 7.43

962 7.66

977 7.88

991 8.09

9000 872 6.84

889 7.08

906 7.34

923 7.59

939 7.84

956 8.09

971 8.33

986 8.57

-

9500 898 7.70

915 7.97

932 8.23

949 8.50

10000 925 8.62

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10500

11000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive Accessory

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

94 RT-PRC043AC-EN

Performance Data

Table 62. Evaporator fan performance 25 tons TSH300/301G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive 7.5-hp Standard Motor & Drive

7000 589 2.44

620 2.65

652 2.96

688 3.30

707 3.52

724 3.73

741 3.94

758 4.15

774 4.36

7500 583 2.57

618 2.85

651 3.18

682 3.56

715 3.78

742 4.12

759 4.35

775 4.58

791 4.80

807 5.03

8000 617 3.09

649 3.33

685 3.79

711 3.99

739 4.37

774 4.75

794 5.04

810 5.29

825 5.53

841 5.77

8500 652 3.67

681 3.92

717 4.39

742 4.65

770 5.10

794 5.31

828 5.79

845 6.08

860 6.33

875 6.60

9000 687 4.33

715 4.60

747 5.00

775 5.44

798 5.65

824 6.18

850 6.42

881 6.94

896 7.23

910 7.50

9500 722 5.05

749 5.34

776 5.66

808 6.26

829 6.49

853 6.92

877 7.32

904 7.67

931 8.20

945 8.48

10000 757 5.86

783 6.17

807 6.45

839 7.06

863 7.48

882 7.66

907 8.36

928 8.58

10500 792 6.75

817 7.08

840 7.37

868 7.87

895 8.50

-

11000 828 7.73

852 8.07

874 8.40

-

-

-

-

7.5-hp Standard Motor & High Static Drive

-

-

-

-

-

-

-

-

-

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

7000 789 4.57

803 4.77

818 4.99

832 5.20

845 5.40

859 5.61

872 5.83

885 6.03

897 6.24

909 6.45

7500 821 5.25

836 5.48

850 5.70

864 5.93

877 6.15

891 6.38

904 6.61

915 6.82

928 7.05

940 7.27

8000 855 6.01

869 6.25

883 6.50

897 6.74

910 6.97

922 7.21

935 7.45

947 7.68

959 7.92

972 8.18

8500 889 6.85

903 7.11

916 7.36

930 7.62

942 7.87

955 8.12

967 8.38

-

9000 924 7.77

937 8.04

950 8.31

963 8.59

-

9500

10000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10500

11000

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive Accessory

-

-

-

-

-

-

-

-

-

-

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

RT-PRC043AC-EN 95

Performance Data

Table 63. Evaporator fan performance 25 tons with gas heat YSD300/301G standard refrigeration system downflow

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive 7.5-hp Standard Motor & Drive

7000 554 2.22

580 2.43

604 2.56

629 2.79

654 3.02

678 3.22

700 3.41

721 3.61

742 3.80

762 3.98

7500 590 2.72

614 2.90

638 3.10

660 3.28

684 3.54

707 3.77

729 3.98

749 4.19

769 4.40

789 4.60

8000 627 3.28

647 3.44

672 3.71

692 3.84

714 4.10

736 4.37

758 4.62

778 4.84

798 5.06

816 5.28

8500 663 3.90

682 4.05

706 4.37

726 4.53

745 4.73

766 5.03

787 5.31

807 5.56

826 5.80

844 6.03

9000 699 4.60

718 4.77

739 5.06

760 5.31

778 5.45

797 5.74

817 6.05

836 6.34

855 6.62

873 6.86

9500 735 5.37

754 5.58

773 5.82

794 6.17

811 6.32

829 6.53

847 6.85

866 7.18

884 7.49

902 7.77

10000 771 6.23

790 6.47

807 6.67

827 7.06

845 7.29

861 7.44

878 7.73

896 8.08

914 8.42

10500 807 7.17

827 7.46

842 7.63

861 8.00

880 8.36

895 8.52

-

11000 844 8.20

863 8.54

-

7.5-hp Standard Motor & High Static Drive

-

-

-

-

-

-

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

7000 780 4.17

798 4.34

817 4.53

834 4.70

850 4.87

866 5.04

882 5.21

897 5.37

913 5.54

928 5.70

7500 808 4.81

825 5.00

843 5.20

859 5.39

876 5.58

892 5.77

908 5.95

922 6.13

937 6.31

952 6.49

8000 835 5.50

852 5.72

869 5.93

886 6.15

902 6.35

918 6.55

933 6.75

948 6.95

963 7.15

978 7.35

8500 862 6.27

880 6.50

896 6.73

913 6.96

929 7.19

944 7.41

960 7.63

975 7.85

989 8.06

9000 891 7.11

908 7.36

924 7.61

940 7.86

956 8.10

971 8.34

986 8.58

-

9500 919 8.04

936 8.29

952 8.56

10000 -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10500

11000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

96 RT-PRC043AC-EN

Performance Data

Table 64. Evaporator fan performance 25 tons with gas heat YSH300/301G standard refrigeration system horizontal

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive 7.5-hp Standard Motor & Drive

7000

7500

8000

8500

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

596 2.17

628 2.44

659 2.72

687 2.99

715 3.27

741 3.55

586 2.20

618 2.48

646 2.74

676 3.04

705 3.34

732 3.63

758 3.93

608 2.50

639 2.81

667 3.10

694 3.38

722 3.70

749 4.01

775 4.33

604 2.58

633 2.85

660 3.16

689 3.49

715 3.78

741 4.10

767 4.43

793 4.77

9000 598 2.65

629 2.96

657 3.23

682 3.54

710 3.88

737 4.23

760 4.54

785 4.87

810 5.23

9500 598 2.80

624 3.03

654 3.38

682 3.67

707 3.97

731 4.32

757 4.68

782 5.04

804 5.36

828 5.72

10000 628 3.26

649 3.44

680 3.84

707 4.15

732 4.46

755 4.80

778 5.17

803 5.56

826 5.93

848 6.27

10500 657 3.76

676 3.91

705 4.32

732 4.68

756 4.99

779 5.33

801 5.70

824 6.10

848 6.51

869 6.88

11000 687 4.31

703 4.44

731 4.83

757 5.24

781 5.58

803 5.91

825 6.28

845 6.68

868 7.10

891 7.54

7.5-hp Standard Motor & High Static

Drive

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

7000 766 3.82

789 4.09

812 4.38

834 4.65

856 4.94

877 5.22

897 5.51

916 5.78

936 6.07

954 6.35

7500 782 4.22

806 4.52

829 4.82

851 5.11

872 5.41

893 5.71

913 6.01

933 6.31

952 6.61

969 6.90

8000 800 4.65

823 4.97

845 5.28

867 5.59

889 5.92

909 6.23

929 6.54

948 6.85

967 7.18

985 7.49

8500 817 5.10

840 5.44

862 5.76

884 6.10

905 6.44

926 6.78

945 7.11

965 7.45

983 7.77 1001 8.11

9000 834 5.58

857 5.93

880 6.30

901 6.64

922 6.99

942 7.34

962 7.72

981 8.06 1000 8.42

-

9500 851 6.09

874 6.46

896 6.84

919 7.22

939 7.59

959 7.96

979 8.35

10000 869 6.63

892 7.04

915 7.43

935 7.81

957 8.22

-

-

-

-

-

-

-

-

-

-

-

-

-

10500 889 7.24

910 7.62

932 8.04

953 8.47

11000 911 7.92

930 8.30

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

RT-PRC043AC-EN 97

Performance Data

Table 65. Evaporator fan performance—12½ tons—TH*150G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

2500 (a)

3000 (a)

3500 (a)

4000

-

-

-

-

-

-

-

-

-

-

-

-

370 0.32

417 0.43

458 0.54

496 0.66

531 0.79

564 0.91

593 1.03

623 1.16

386 0.42

430 0.54

472 0.67

508 0.80

543 0.94

576 1.08

606 1.22

635 1.35

360 0.43

404 0.55

447 0.68

486 0.81

522 0.96

556 1.11

588 1.26

619 1.40

647 1.55

387 0.59

426 0.71

465 0.85

502 0.99

537 1.14

570 1.29

602 1.44

631 1.59

660 1.74

4500 377 0.66

417 0.79

452 0.92

486 1.06

521 1.20

555 1.36

586 1.50

617 1.65

645 1.80

673 1.95

5000 409 0.88

448 1.03

481 1.17

512 1.30

542 1.44

573 1.59

604 1.74

633 1.89

662 2.04

688 2.18

5500 441 1.14

479 1.30

510 1.44

539 1.58

567 1.71

594 1.85

624 2.01

652 2.16

679 2.31

705 2.46

6000 474 1.42

510 1.59

540 1.74

568 1.88

594 2.01

620 2.15

645 2.29

671 2.45

698 2.62

724 2.81

3-hp Standard Motor & High Static Drive Accessory (b)

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory

(b)

3-hp Standard Motor & High Static Drive Accessory (c)

2500 (a)

3000 (a)

3500 (a)

650 1.28

676 1.40

701 1.52

726 1.64

748 1.76

771 1.87

793 1.98

814 2.09

835 2.21

855 2.32

662 1.48

688 1.61

713 1.74

737 1.86

760 1.98

783 2.11

806 2.23

827 2.36

847 2.48

867 2.61

674 1.69

701 1.82

726 1.96

750 2.09

772 2.22

795 2.35

818 2.49

839 2.64

859 2.78

879 2.96

4000 687 1.89

713 2.04

738 2.18

762 2.32

785 2.47

808 2.62

829 2.79

851 2.97

871 3.17

891 3.40

4500 700 2.10

726 2.26

750 2.41

775 2.58

798 2.75

821 2.95

842 3.15

864 3.41

885 3.71

904 4.06

5000 714 2.34

740 2.50

765 2.68

788 2.87

811 3.09

834 3.36

855 3.66

875 4.02

897 4.49

917 5.04

5500

6000

730

748

2.63

3.02

755

772

2.81

3.26

778

795

3.02

3.54

801

818

3.26

3.89

824

839

3.56

4.32

846

860

3.93

4.85

868

881

5-hp Oversized Motor & Drive

4.40

5.51

889

-

4.96

-

909

-

5.65

-

-

-

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

98 RT-PRC043AC-EN

Performance Data

Table 66. Evaporator fan performance—12½ tons—THD150G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

2500 (a)

3000 (a)

3500 (a)

4000

369 0.32 416 0.42 458 0.52 496 0.63 530 0.74 561 0.85 591 0.97 618

383 0.41 429 0.52 470 0.64 508 0.76 543 0.88 575 1.01 606 1.13 634

358 0.42 403 0.53 444 0.64 484 0.77 520 0.90 554 1.04 587 1.18 618 1.32 647

386 0.57 424 0.67 464 0.80 500 0.93 535 1.07 569 1.21 600 1.36 629 1.52 658

1.09

1.26

1.47

1.69

4500 375 0.62 415 0.75 450 0.86 484 0.99 519 1.13 552 1.28 583 1.42 615 1.58 644 1.75 671

5000 407 0.82 446 0.97 479 1.09 510 1.22 540 1.37 572 1.53 602 1.69 630 1.84 658 2.01 686

1.92

2.20

5500 440 1.06 477 1.22 508 1.37 537 1.50 565 1.65 592 1.81 621 1.99 650 2.16 676 2.34 701

6000 471 1.34 508 1.52 538 1.69 566 1.84 592 1.99 617 2.15 643 2.32 669 2.51 695 2.71 721

2.51

2.90

3-hp Standard Motor & High Static Drive Accessory (b)

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory (b)

3-hp Standard Motor & High Static Drive Accessory (c)

2500 (a)

3000 (a)

3500 (a)

645 1.22 670 1.35 694 1.48 718 1.61 740 1.75 762 1.88 783 2.02 803 2.17 823 2.31 843

660 1.40 686 1.54 710 1.69 733 1.83 755 1.98 777 2.13 798 2.28 819 2.44 839 2.60 858

674 1.61 700 1.76 725 1.91 749 2.07 771 2.23 793 2.39 814 2.56 834 2.73 854 2.90 873

2.46

2.76

3.07

4000 686 1.85 712 2.02 737 2.18 762 2.35 785 2.51 808 2.68 830 2.86 850 3.04 870 3.22 889

4500 698 2.10 724 2.28 749 2.47 773 2.65 797 2.84 820 3.02 842 3.21 863 3.39 884 3.58 904

5000 712 2.38 737 2.57 762 2.76 785 2.97 809 3.17 831 3.38 853 3.58 875 3.79 895 3.99 916

5500 727 2.70 753 2.90 776 3.10 799 3.31 822 3.52 844 3.74 865 3.96 886 4.19 907 4.42 927

6000 744 3.09 767 3.28 791 3.49 815 3.71 837 3.92 858 4.15 879 4.37 899 4.60 919 4.84 939

5-hp Oversized Motor & Drive

3.41

3.77

4.20

4.64

5.08

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

RT-PRC043AC-EN 99

Performance Data

Table 67. Evaporator fan performance—12½ tons—YH*150G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

5500 462 1.23

496 1.38

525 1.51

553 1.64

582 1.79 610 1.93

638 2.08

666 2.23

692 2.38

718

6000 497 1.53

530 1.69

558 1.83

584 1.96

610 2.09 636 2.24

662 2.39

688 2.56

713 2.73

738

3-hp Standard Motor & High Static Drive Accessory (b)

Continued

External Static Pressure (Inches of Water)

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

2500 (a)

3000 (a)

263 0.15

322 0.23

375 0.33

421 0.44

463 0.56 501 0.68

536 0.80

568 0.92

599 1.04

627 1.16

292 0.23

344 0.33

393 0.43

436 0.55

477 0.69 515 0.82

549 0.96

582 1.10

612 1.23

640 1.36

3500 (a)

324 0.35

369 0.45

413 0.57

455 0.71

494 0.84 529 0.99

563 1.14

595 1.29

626 1.43

655 1.57

4000 358 0.51

398 0.62

437 0.75

475 0.89

512 1.03 547 1.18

579 1.33

609 1.48

639 1.63

668 1.78

4500 392 0.71

429 0.84

464 0.97

499 1.11

532 1.25 566 1.41

597 1.55

627 1.70

655 1.85

682

5000 427 0.95

462 1.09

493 1.22

525 1.36

556 1.51 587 1.66

617 1.80

645 1.95

673 2.10

700

2.00

2.25

2.54

2.92

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory

(b)

3-hp Standard Motor & High Static Drive Accessory (c)

2500 (a)

3000 (a)

3500 (a)

655 1.28

681 1.40

706 1.51

730 1.63

754 1.74 776 1.85

798 1.96

820 2.07

839 2.17

860 2.28

668 1.49

694 1.62

719 1.74

743 1.87

766 1.98 790 2.11

811 2.22

833 2.35

852 2.46

873 2.59

681 1.71

708 1.85

732 1.97

756 2.10

780 2.24 803 2.37

824 2.50

846 2.65

866 2.79

887 2.96

4000 695 1.93

721 2.07

746 2.22

770 2.36

794 2.50 816 2.66

838 2.82

859 3.00

879 3.20

899

4500 708 2.15

735 2.31

760 2.47

784 2.63

807 2.81 830 3.01

852 3.24

873 3.50

893 3.79

913

5000 725 2.41

750 2.57

773 2.75

798 2.97

821 3.20 843 3.47

865 3.81

887 4.22

907 4.71

926

5500 744 2.73

767 2.92

790 3.14

813 3.41

836 3.75 857 4.16

878 4.65

900 5.31

920 6.07

940

6000 761 3.14

786 3.42

809 3.74

831 4.15

852 4.64 873 5.25

894 6.07

913 6.97

934 8.19

954

5-hp Oversized Motor & Drive

3.44

4.18

5.27

7.01

9.61

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

100 RT-PRC043AC-EN

Performance Data

Table 68. Evaporator fan performance—12½ tons—YHD150G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

5500 460 1.15 493 1.30 523 1.44 552 1.58 579 1.73 607 1.90 636 2.08 664 2.26 689 2.43 714

6000 495 1.45 527 1.63 555 1.78 582 1.93 608 2.09 633 2.25 659 2.44 685 2.64 711 2.83 736

3-hp Standard Motor & Drive 3-hp Standard Motor & High Static Drive Accessory (b)

Continued

External Static Pressure (Inches of Water)

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

2500 (a)

3000 (a)

374 0.33 420 0.43 462 0.54 500 0.64 534 0.75 565 0.87 594 0.99 621

391 0.43 436 0.54 476 0.65 513 0.78 548 0.90 580 1.03 610 1.15 638

3500 (a)

— — 368 0.44 412 0.55 453 0.67 492 0.79 528 0.93 561 1.07 593 1.21 624 1.36 653

4000 356 0.49 397 0.60 435 0.71 474 0.84 509 0.96 545 1.11 577 1.25 608 1.41 638 1.57 666

1.11

1.29

1.50

1.74

4500 390 0.67 428 0.79 462 0.90 496 1.04 531 1.18 563 1.33 594 1.48 625 1.64 653 1.81 681

5000 425 0.89 460 1.02 492 1.15 522 1.28 554 1.43 585 1.60 614 1.76 642 1.91 671 2.09 698

1.98

2.27

2.61

3.02

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory (b)

3-hp Standard Motor & High Static Drive Accessory (c)

2500 (a)

3000 (a)

3500 (a)

648 1.23 673 1.36 697 1.49 720 1.62 742 1.76 764 1.90 785 2.04 806 2.18 825 2.33 845

664 1.42 689 1.56 713 1.71 737 1.86 759 2.00 781 2.15 802 2.31 822 2.46 842 2.62 861

680 1.64 706 1.79 730 1.94 754 2.10 776 2.27 797 2.43 818 2.60 839 2.77 858 2.94 878

2.47

2.78

3.11

4000 693 1.90 719 2.06 744 2.23 768 2.39 792 2.56 814 2.73 835 2.91 855 3.09 875 3.27 894

4500 707 2.16 733 2.35 758 2.53 782 2.72 805 2.90 827 3.09 849 3.27 870 3.46 891 3.65 911

5000 723 2.46 748 2.65 772 2.85 795 3.05 818 3.26 841 3.47 862 3.67 884 3.88 904 4.08 924

5500 741 2.81 765 3.01 788 3.21 811 3.42 833 3.63 855 3.85 876 4.08 897 4.31 917 4.53 937

6000 758 3.21 782 3.41 806 3.62 829 3.84 850 4.06 871 4.28 892 4.51 912 4.75 932 4.99 951

5-hp Oversized Motor & Drive

3.46

3.84

4.28

4.76

5.24

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

RT-PRC043AC-EN 101

Performance Data

Table 69. Evaporator fan performance—15 tons—TH*180G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

3000 (a)

3600 (a)

-

-

-

-

-

-

-

-

369 0.38

411 0.47

448 0.57

483 0.68

514 0.78

543 0.89

570 1.00

596 1.11

391 0.50

429 0.61

465 0.72

499 0.84

530 0.96

560 1.08

587 1.21

614 1.33

4200 (a)

378 0.55

416 0.66

451 0.78

485 0.90

516 1.03

547 1.16

575 1.30

603 1.44

629 1.58

4800 370 0.62

408 0.74

443 0.87

476 0.99

507 1.12

537 1.26

565 1.40

593 1.55

619 1.71

645 1.86

5400 405 0.84

439 0.97

472 1.11

502 1.25

532 1.39

560 1.54

587 1.69

613 1.85

638 2.01

662 2.18

6000 440 1.11

472 1.25

502 1.40

531 1.56

558 1.72

584 1.87

610 2.03

635 2.20

659 2.37

682 2.54

6600 476 1.43

505 1.58

533 1.74

560 1.92

586 2.09

611 2.26

635 2.44

659 2.61

682 2.79

704 2.97

7200 512 1.81

539 1.98

565 2.15

590 2.33

615 2.52

639 2.71

661 2.90

683 3.08

706 3.28

727 3.47

3-hp Standard Motor & High Static Drive Accessory (b)

5-hp

Oversized

Motor &

Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory

(b)

3HP Standard Motor & High Static Drive Accessory (c)

620 1.23

643 1.35

664 1.47

684 1.59

703 1.72

722 1.86

740 1.99

757 2.13

775 2.27

791 2.41

3000 (a)

3600 (a)

4200 (a)

638 1.46

662 1.59

684 1.73

705 1.86

726 2.00

746 2.14

765 2.28

784 2.42

801 2.57

817 2.72

654 1.73

678 1.87

701 2.02

723 2.17

744 2.32

764 2.47

784 2.62

802 2.78

821 2.94

839 3.10

4800 670 2.02

693 2.18

716 2.34

738 2.51

760 2.67

780 2.84

800 3.01

820 3.18

838 3.35

856 3.52

5400 686 2.35

709 2.52

732 2.70

753 2.88

775 3.06

795 3.24

815 3.42

835 3.61

854 3.80

872 3.98

6000 705 2.73

727 2.91

749 3.10

770 3.29

790 3.48

810 3.68

830 3.88

850 4.08

869 4.28

887 4.48

6600 725 3.16

747 3.35

767 3.55

788 3.75

808 3.96

827 4.17

846 4.37

865 4.59

884 4.80

902 5.02

7200 748 3.66

768 3.86

788 4.07

808 4.28

827 4.49

846 4.71

864 4.93

883 5.15

900 5.38

918 5.61

5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

102 RT-PRC043AC-EN

Performance Data

Table 70. Evaporator fan performance—15 tons—THD180G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

0.80

0.90

1.00

rpm bhp rpm bhp rpm bhp

3000 (a)

3600 (a)

4200 (a)

3-hp Standard Motor & Low Static Drive Accessory

— — — — — 387 0.49 424 0.61 458 0.72 489

3-hp Standard Motor & Drive

0.84 516 0.96 541 1.08 565 1.20

— — 367 0.51 407

354 0.54 391 0.67 426

0.63 441

0.80 460

0.76 472

0.94 492

0.89 502

1.08 520

1.02

1.23

532

546

1.16 559

1.38 572

1.30 584

1.54 598

1.44

1.70

4800 — — 383 0.73 418 0.86 449 1.01 480 1.15 510 1.31 540 1.48

5400 371 0.82 412 0.97 446 1.11 476 1.26 504 1.43 531 1.59 558 1.76

567

585

6000 403 1.08 441 1.25 475 1.41 504 1.57 530 1.74 555 1.93 580 2.11 604

6600 435 1.39 472 1.59 504 1.78 532 1.94 558 2.12 582 2.31 605 2.51 628

7200 467 1.75 502 1.98 533 2.19 561 2.38 587 2.56 610 2.76 632 2.97

3-hp Standard Motor & High Static Drive Accessory (b)

653

1.65 591

1.94 611

2.29 629

2.71

1.81 614

2.13 635

2.48 653

672

1.98

2.32

2.69

3.11

3.19 674 3.41 694

5-hp Oversized Motor & Drive

3.62

1.80

rpm

1.90

2.00

bhp rpm bhp rpm bhp

3-hp Standard Motor &

Drive

3-hp Standard Motor & High Static Drive Accessory (b)

3-hp Standard

Motor & High

Static Drive

Accessory (c)

3000 (a)

3600 (a)

587 1.32 609 1.44 629 1.57 649 1.70 668 1.83 687 1.97 705 2.11

608 1.58 629 1.72 650 1.87 670 2.01 689 2.16 708 2.30 725 2.45

723 2.25 740 2.39 758

743 2.61 760 2.76 776

2.54

2.92

4200 (a)

623 1.86 647 2.03 669 2.19 690 2.36 709 2.52 728 2.68 746 2.85 764

4800 636 2.16 659 2.34 682 2.52 704 2.71 726 2.90 746 3.09 765 3.28 783

3.01 781

3.46

3.18 797

817

3.35

3.83

5400 656 2.51 677 2.70 698 2.89 717 3.09 738 3.29 758 3.50 778 3.71

6000 676 2.90 698 3.11 718 3.32 737 3.53 756 3.74 774 3.95 792 4.17

6600 694 3.33 716 3.56 737 3.79 758 4.02 777 4.25 795 4.48 812 4.71 829 4.94 846 5.18 862 5.42

7200 715 3.84 735 4.06 755 4.30 775 4.55 795 4.80 814 5.05 833 5.31 849.90 5.56 — — — —

5-hp Oversized Motor & Drive

798

810

3.92 817 4.13 835 4.34

4.40 829 4.63 847 4.86

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

RT-PRC043AC-EN 103

Performance Data

Table 71. Evaporator fan performance—15 tons—YH*180G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory 3-hp Standard Motor & Drive

3000 (a)

3600 (a)

-

-

-

-

376 0.39

417 0.49

454 0.59

488 0.69

519 0.80

547 0.91

574 1.02

600 1.13

359 0.42

400 0.52

438 0.63

473 0.75

506 0.87

537 0.99

566 1.11

594 1.24

619 1.36

4200 (a)

390 0.59

427 0.70

462 0.81

495 0.94

526 1.07

555 1.21

584 1.34

611 1.48

637 1.63

4800 386 0.66

422 0.79

456 0.92

489 1.04

519 1.18

548 1.32

577 1.46

604 1.61

630 1.77

655 1.92

5400 422 0.90

456 1.04

487 1.18

517 1.32

546 1.47

574 1.62

600 1.77

626 1.93

651 2.09

675 2.26

6000 460 1.19

491 1.34

520 1.50

548 1.66

574 1.81

601 1.97

626 2.14

650 2.30

673 2.48

696 2.66

6600 498 1.54

526 1.70

554 1.87

580 2.05

605 2.22

629 2.39

653 2.57

676 2.75

699 2.93

720 3.11

7200 536 1.96

562 2.13

588 2.31

613 2.50

636 2.69

659 2.88

681 3.07

703 3.26

725 3.45

746 3.65

3-hp Standard Motor & High Static Drive Accessory (b)

5-hp

Oversized

Motor &

Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & High Static Drive Accessory

(b)

3HP Standard Motor & High Static Drive Accessory (c)

624 1.25

646 1.36

667 1.49

687 1.62

706 1.74

725 1.88

743 2.01

760 2.15

777 2.29

794 2.43

3000 (a)

3600 (a)

4200 (a)

643 1.49

667 1.62

689 1.76

710 1.89

731 2.03

750 2.17

769 2.31

788 2.45

804 2.60

821 2.76

662 1.77

685 1.92

708 2.07

729 2.21

750 2.37

770 2.52

789 2.67

808 2.83

826 2.99

844 3.14

4800 679 2.08

703 2.24

725 2.41

747 2.57

768 2.74

789 2.91

808 3.08

827 3.25

845 3.42

863 3.59

5400 698 2.44

721 2.61

743 2.79

764 2.97

785 3.15

806 3.33

825 3.52

845 3.70

863 3.89

881 4.08

6000 719 2.84

741 3.03

762 3.22

783 3.41

803 3.61

823 3.80

842 4.00

862 4.20

880 4.40

898 4.61

6600 742 3.30

763 3.50

783 3.70

803 3.91

823 4.11

842 4.32

861 4.54

879 4.75

897 4.97

915 5.19

7200 766 3.84

786 4.05

806 4.26

825 4.47

844 4.68

863

5-hp Oversized Motor & Drive

4.91

881 5.13

899 5.36

916 5.58

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

104 RT-PRC043AC-EN

Performance Data

Table 72. Evaporator fan performance—15 tons—YHD180G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor & Low Static Drive Accessory

3000 (a)

3600 (a)

355 0.40 393 0.51 429 0.63 463 0.74 493

377 0.53 415 0.66 448 0.79 478 0.91 509

4200 (a)

— — 366 0.58 402 0.71 436 0.84 470 0.98 501 1.13 528

4800 358 0.66 397 0.78 430 0.92 461 1.07 492 1.21 522 1.38 551

3-hp Standard Motor & Drive

0.86 520 0.98 545 1.10 568

1.05 538 1.19 565 1.33 590

1.28 554 1.43 580 1.59 606

1.54 576 1.71 600 1.88 623

1.22

1.47

1.75

2.05

5400 393 0.90 430 1.04 461 1.19 490 1.35 517 1.51 545 1.67 572

6000 428 1.19 463 1.35 493 1.51 520 1.68 546 1.86 571 2.04 595

1.85 598 2.04 623 2.23 646

2.22 619 2.41 644 2.61 667

2.41

2.82

6600 463 1.54 496 1.73 525 1.90 552 2.07 576 2.26 599 2.46 622

7200 499 1.96 531 2.18 559 2.36 584 2.55 607 2.74 630 2.95 651

2.66 644

3.17 672

3-hp Standard Motor & High Static Drive Accessory (b)

2.86 666

3.38 692

3.06 688

3.60 713

3.27

3.82

5-hp Oversized Motor & Drive

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

3-hp Standard Motor &

Drive

591 1.34 612 1.46 632 1.59 652

3-hp Standard Motor & High Static Drive Accessory

1.72 671 1.86 690 1.99 708

(b)

3HP Standard

Motor & High

Static Drive

Accessory (c)

2.13 725 2.27 743 2.42 761 2.56

3000 (a)

3600 (a)

4200 (a)

613 1.61 634 1.76 655 1.90 674 2.04 693 2.19 712 2.34 729

631 1.91 654 2.08 676 2.24 696 2.40 715 2.57 734 2.73 752

2.49 746 2.64 763 2.79 780

2.90 769 3.07 786 3.23 802

2.95

3.41

4800

5400

6000

6600

7200

645 2.23 668

667 2.60 687

690 3.03 711

711 3.50 732

733 4.04 753

2.41 691

2.79 708

3.24 730

3.73 753

4.28 773

2.60 713

2.99 728

3.45 749

3.96 772

4.52 793

2.79 734 2.98 754

3.19 748 3.40 768

3.66 767 3.87 785

4.20 790 4.42 808

4.77 812 5.02 831

5-hp Oversized Motor & Drive

3.16 772

3.60 788

4.09 803

4.66 825

3.35 790 3.54 807 3.72 824

3.81 807 4.03 826 4.24 844

4.31 822 4.54 840 4.77 858

4.88 841 5.12 858 5.36 874

5.28 848.25 5.53 — — — — —

3.91

4.45

5.00

5.60

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Fan Sheave BK110X1 3/16 and 1VP50X7/8 Required.

(c) Fan Sheave BK110X1 3/16 and 1VP56X7/8 Required.

RT-PRC043AC-EN 105

Performance Data

Table 73. Evaporator fan performance— 17½ tons — TH*210G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory

3500 (a)

4200 (a)

4900 (a)

5600

— — 470 0.86 501 1.00 531 1.13 558 1.27 582

462 0.94 494 1.09 521 1.24 547 1.39 573 1.54 599

— — 455 1.06 485 1.20 515 1.36 544 1.53 572 1.70 596 1.88 619

458 1.21 487 1.37 514 1.54 541 1.71 567 1.88 593 2.07 619 2.26 643

1.41

1.71

2.05

2.46

6300 — — 459 1.43 492 1.60 520 1.76 546 1.94 570 2.13 594 2.32 618 2.51 641 2.70 664

7000 460 1.65 495 1.86 526 2.07 554 2.24 580 2.42 603 2.63 625 2.83 646 3.05 668 3.25 689

7700 498 2.13 531 2.38 562 2.62 589 2.82 614 3.02 637 3.22 658 3.44 678 3.66 698 3.90 717

8400 537 2.71 568 2.99 597 3.26 624 3.50 648 3.71 670 3.93 692 4.15 711 4.38 730 4.63 748

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive Accessory

2.91

3.47

4.13

4.88

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive Accessory

3500 (a)

4200 (a)

4900 (a)

605 1.54 627 1.68 648 1.82 667 1.96 686 2.11 705 2.25 723 2.40 740 2.55 757 2.70 773

624 1.87 648 2.04 670 2.20 691 2.36 710 2.53 729 2.69 747 2.86 765 3.03 782 3.19 798

641 2.22 663 2.41 686 2.59 708 2.79 729 2.98 750 3.17 769 3.36 788 3.55 805 3.74 822

2.86

3.36

3.93

5600 665 2.65 686 2.85 706 3.05 725 3.25 745 3.45 764 3.66 784 3.88 803 4.09 822 4.31 841

6300 687 3.13 709 3.35 730 3.57 750 3.79 768 4.01 786 4.23 804 4.46 821 4.69 838 4.92 856

7000 710 3.68 731 3.91 752 4.15 772 4.40 792 4.64 811 4.89 828 5.14 845 5.38 861 5.62 878

7700 737 4.36 756 4.59 775 4.83 794 5.07 813 5.33 832 5.60 850 5.87 868 6.14 886 6.41 902

8400 767 5.14 784 5.38 802 5.63 820 5.89 837 6.15 854 6.41 872 6.68 889 6.97 907 7.26 924

7.5-hp Oversized Motor & Drive

4.54

5.15

5.87

6.68

7.55

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

106 RT-PRC043AC-EN

Performance Data

Table 74. Evaporator fan performance — 17½ tons — THD210G — dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

— — — — — — — — — —

5HP Standard Motor & Low

Static Drive Accessory

5HP Standard Motor & Drive

470 0.86 501 1.00 531 1.13 558 1.27 582 1.41 3500 (a)

4200 (a)

4900 (a)

— — 462 0.94 494 1.09 521 1.24 547 1.39 573 1.54 599

455 1.06 485 1.20 515 1.36 544 1.53 572 1.70 596 1.88 619

1.71

2.05

5600 — — — — 458 1.21 487 1.37 514 1.54 541 1.71 567 1.88 593 2.07 619 2.26 643

6300 — — 459 1.43 492 1.60 520 1.76 546 1.94 570 2.13 594 2.32 618 2.51 641 2.70 664

7000 460 1.65 495 1.86 526 2.07 554 2.24 580 2.42 603 2.63 625 2.83 646 3.05 668 3.25 689

7700 498 2.13 531 2.38 562 2.62 589 2.82 614 3.02 637 3.22 658 3.44 678 3.66 698 3.90 717

2.46

2.91

3.47

4.13

8400 537 2.71 568 2.99 597 3.26 624 3.50 648 3.71 670 3.93 692 4.15 711 4.38 730 4.63 748 4.88

5HP Standard Motor & High Static Drive Accessory

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5HP Standard Motor & Drive 5HP Standard Motor & High Static Drive Accessory

3500 (a)

4200 (a)

605 1.54 627 1.68 648 1.82 667 1.96 686 2.11 705 2.25 723 2.40 740 2.55 757 2.70 773

624 1.87 648 2.04 670 2.20 691 2.36 710 2.53 729 2.69 747 2.86 765 3.03 782 3.19 798

4900 (a)

641 2.22 663 2.41 686 2.59 708 2.79 729 2.98 750 3.17 769 3.36 788 3.55 805 3.74 822

5600 665 2.65 686 2.85 706 3.05 725 3.25 745 3.45 764 3.66 784 3.88 803 4.09 822 4.31 841

2.86

3.36

3.93

4.54

6300 687 3.13 709 3.35 730 3.57 750 3.79 768 4.01 786 4.23 804 4.46 821 4.69 838 4.92 856

7000 710 3.68 731 3.91 752 4.15 772 4.40 792 4.64 811 4.89 828 5.14 845 5.38 861 5.62 878

7700 737 4.36 756 4.59 775 4.83 794 5.07 813 5.33 832 5.60 850 5.87 868 6.14 886 6.41 902

8400 767 5.14 784 5.38 802 5.63 820 5.89 837 6.15 854 6.41 872 6.68 889 6.97 907 7.26 924

5.15

5.87

6.68

7.55

7.5HP Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 107

Performance Data

Table 75. Evaporator fan performance—17½ tons—YH*210G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory 5-hp Standard Motor & Drive

3500 (a)

4200

(a)

4900

(a)

5600

— — 476 0.89 508 1.02 537 1.16 563 1.30 587 1.43

472 0.99 502 1.14 529 1.28 555 1.43 581 1.59 607 1.76

— — 468 1.12 497 1.27 527 1.43 556 1.60 582 1.78 605 1.95 628 2.12

474 1.29 501 1.46 528 1.63 555 1.80 581 1.98 607 2.17 632 2.37 655 2.56

6300 — — 482 1.55 512 1.71 538 1.88 563 2.07 587 2.26 610 2.45 634 2.64 657 2.84 680 3.06

7000 490 1.84 522 2.04 550 2.22 576 2.39 599 2.59 621 2.80 643 3.01 665 3.22 686 3.43 707 3.65

7700 532 2.39 562 2.62 589 2.83 614 3.02 637 3.22 658 3.44 679 3.67 698 3.90 718 4.13 737 4.36

8400 574 3.03 603 3.30 629 3.55 653 3.76 675 3.97 696 4.20 715 4.43 734 4.68 752 4.93 770 5.18

5-hp Standard Motor & High Static Drive Accessory

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive Accessory

3500

(a)

4200

(a)

4900

(a)

610 1.57 631 1.71 652 1.85 672 1.99 690 2.14 709 2.28 726 2.43 744 2.58 760 2.73 777 2.89

632 1.92 655 2.09 677 2.25 697 2.41 716 2.58 735 2.74 753 2.91 770 3.08 787 3.24 803 3.42

650 2.30 673 2.48 695 2.67 717 2.86 738 3.06 758 3.25 777 3.44 795 3.63 812 3.82 829 4.01

5600 677 2.76 697 2.96 717 3.15 736 3.36 755 3.56 775 3.78 795 3.99 814 4.21 832 4.43 850 4.65

6300 702 3.28 724 3.50 744 3.72 762 3.94 781 4.17 798 4.39 816 4.61 833 4.84 850 5.08 868 5.32

7000 727 3.88 748 4.11 769 4.36 789 4.60 808 4.85 826 5.10 843 5.34 859 5.59 875 5.83 891 6.08

7700 756 4.59 775 4.83 794 5.08 813 5.34 832 5.60 851 5.87 869 6.15 886 6.41 903 6.69 918 6.96

8400 788 5.44 806 5.69 824 5.95 841 6.21 858 6.46 876 6.74 893 7.03 910 7.32 927 7.61 944 7.91

7.5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

108 RT-PRC043AC-EN

Performance Data

Table 76. Evaporator fan performance — 17½ tons — YHD210G — dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

7700 532 2.39 562 2.62 589 2.83 614 3.02 637 3.22 658 3.44 679 3.67 698 3.90 718 4.13 737

8400 574 3.03 603 3.30 629 3.55 653 3.76 675 3.97 696 4.20 715 4.43 734 4.68 752 4.93 770

5HP Standard Motor & High Static Drive Accessory

Continued

External Static Pressure (Inches of Water)

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5HP Standard Motor &

Low Static Drive

Accessory

5HP Standard Motor & Drive

474 1.29 501 1.46 528 1.63 555 1.80 581 1.98 607 2.17 632 2.37 655 5600 — — — —

6300 — —

482 1.55

(a) 512

1.71 538 1.88 563 2.07 587 2.26 610 2.45 634 2.64 657 2.84 680

7000 490 1.84

(a) 522 2.04 550 2.22 576 2.39 599 2.59 621 2.80 643 3.01 665 3.22 686 3.43 707

2.56

3.06

3.65

4.36

5.18

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5HP Standard Motor & High Static Drive Accessory

5600 677 2.76

(b) 697 2.96 717 3.15 736 3.36 755 3.56 775 3.78 795 3.99 814 4.21 832 4.43 850 4.65

6300 702 3.28 724 3.50 744 3.72 762 3.94 781 4.17 798 4.39 816 4.61 833 4.84 850 5.08 868 5.32

7000 727 3.88 748 4.11 769 4.36 789 4.60 808 4.85 826 5.10 843 5.34 859 5.59 875 5.83 891 6.08

7700 756 4.59 775 4.83 794 5.08 813 5.34 832 5.60 851 5.87 869 6.15 886 6.41 903 6.69 918 6.96

8400 788 5.44 806 5.69 824 5.95 841 6.21 858 6.46 876 6.74 893 7.03 910 7.32 927 7.61 944

7.5HP Oversized Motor & Drive

7.91

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)5HP Standard Motor & Low Static Drive Accessory

(b)5HP Standard Motor & Drive

RT-PRC043AC-EN 109

Performance Data

Table 77. Evaporator fan performance—20 tons—TH*240G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory 5-hp Standard Motor & Drive

4000 (a)

4800 (a)

5600 (a)

6400

— — 456 0.88 486 1.02 514 1.16 541 1.31 569 1.46 595

451 1.02 481 1.16 512 1.32 541 1.49 568 1.66 592 1.82 615

— — 458 1.21 487 1.37 514 1.54 541 1.71 567 1.88 593 2.07 619 2.26 643

464 1.49 497 1.66 525 1.82 551 2.00 575 2.20 598 2.39 622 2.58 645 2.78 667

1.62

1.99

2.46

2.98

7200 470 1.77 505 2.00 536 2.21 564 2.40 589 2.58 612 2.78 634 3.00 655 3.21 676 3.43 697

8000 514 2.37 547 2.63 577 2.87 603 3.10 628 3.30 651 3.51 672 3.73 692 3.96 711 4.20 730

8800 560 3.10 590 3.38 618 3.65 644 3.92 667 4.16 690 4.39 711 4.61 731 4.84 749 5.09 767

9600 606 3.97 633 4.27 660 4.59 685 4.88 708 5.15 729 5.42 750 5.66 769 5.91 788 6.16 805

5-hp Standard Motor & High Static Drive Accessory

7.5-hp Oversized Motor & Field Supplied Motor Sheave (b)

Continued

External Static Pressure (Inches of Water)

3.65

4.44

5.35

6.42

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive Accessory

4000 (a)

4800 (a)

5600 (a)

620 1.78 643 1.93 664 2.09 685 2.25 704 2.40 722 2.56 740 2.72 758 2.88 775 3.05 791

638 2.17 661 2.35 684 2.54 706 2.72 727 2.91 747 3.10 767 3.29 785 3.48 802 3.66 819

665 2.65 686 2.85 706 3.05 725 3.25 745 3.45 764 3.66 784 3.88 803 4.09 822 4.31 841

3.21

3.85

4.54

6400 690 3.20 712 3.43 733 3.65 753 3.88 772 4.10 790 4.32 807 4.55 824 4.78 841 5.01 858

7200 717 3.86 737 4.09 758 4.33 778 4.58 798 4.83 817 5.08 835 5.34 852 5.59 868 5.84 885

8000 749 4.68 768 4.92 786 5.16 804 5.41 823 5.66 841 5.93 859 6.20 877 6.48 895 6.76 912

8800 784 5.61 802 5.89

(b) 819 6.15 836 6.41 853 6.67 869 6.95 886 7.21 902 7.49 919 7.78 936

9600 822 6.69 839 6.98 854 7.26 870

7.5-hp Oversized Motor & Drive

7.55 886 7.85 901 8.13 917 8.42 — — —

7.5-hp Oversized Motor & Field Supplied Motor Sheave (c)

— —

5.25

6.10

7.04

8.09

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Field Supplied Fan Sheave BK190 Required. Field Supplied Belt may be necessary.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Refer to Table 89, p. 119 to determine additional static pressure drop due to other options/accessories.

8.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

9.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)7.5-hp Oversized Motor & Field Supplied Motor Sheave (c)

(c) Field supplied motor sheave 1VP50 x 1 1/8 required.

110 RT-PRC043AC-EN

Performance Data

Table 78. Evaporator fan performance—20 tons—THD240G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory 5-hp Standard Motor & Drive

4000 (a)

4800 (a)

5600 (a)

6400

— — 454 0.88 485 1.01 513 1.16 540 1.30 568 1.46 594

449 1.01 480 1.15 510 1.31 540 1.48 567 1.65 591 1.81 614

— — 456 1.20 485 1.36 512 1.53 539 1.70 565 1.87 591 2.05 617 2.24 641

461 1.47 494 1.65 523 1.81 549 1.99 573 2.18 596 2.37 619 2.56 642 2.76 665

1.61

1.98

2.44

2.96

7200 467 1.75 502 1.98 533 2.19 561 2.38 587 2.56 610 2.76 632 2.97 653 3.19 674 3.41 694

8000 511 2.35 544 2.60 573 2.85 601 3.08 625 3.28 648 3.48 670 3.70 690 3.93 709 4.16 728

3.62

4.41

8800 556 3.06 586 3.34 614 3.62 640 3.89 664 4.13 687 4.36 708 4.58 728 4.80 746 5.05 764

9600 601 3.91 629 4.22 656 4.53 680 4.82 704 5.12 726 5.38 746 5.62 766 5.87 784 6.10 802

5-hp Standard Motor & High Static Drive Accessory 7.5-hp Oversized Motor & Field Supplied Motor Sheave (b)

5.31

6.37

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Drive 5-hp Standard Motor & High Static Drive Accessory

4000 (a)

4800 (a)

5600 (a)

619 1.77 642 1.93 663 2.08 683 2.24 703 2.39 721 2.55 739 2.71 757 2.87 774 3.04 790

636 2.16 659 2.34 682 2.52 704 2.71 726 2.90 746 3.09 765 3.28 783 3.46 801 3.65 817

663 2.64 684 2.83 704 3.03 724 3.23 743 3.43 763 3.64 782 3.86 802 4.08 821 4.29 839

3.20

3.83

4.51

6400 688 3.18 710 3.40 731 3.63 751 3.85 770 4.08 788 4.30 805 4.52 822 4.75 839 4.98 856

7200 715 3.84 735 4.06 755 4.30 775 4.55 795 4.80 814 5.05 833 5.31 850 5.56 866 5.81 882

8000 747 4.65 765 4.89 784 5.12 802 5.37 820 5.62 838 5.89 856 6.16 874 6.44 892 6.71 909

8800 782 5.57 799 5.84

(c) 816 6.10 833 6.36 850 6.63 866 6.89 883 7.16 899 7.44 916 7.73 933

9600 819 6.64 835 6.92 851 7.21 867 7.49 883 7.79 898

7.5-hp Oversized Motor & Field Supplied Motor Sheave

(b)

8.08 914 8.36 —

7.5-hp Oversized Motor & Drive

— — — —

5.22

6.06

7.00

8.03

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Field supplied motor sheave 1VP50 x 1 1/8 required.

(c) 7.5-hp Oversized Motor & Field Supplied Motor Sheave (b)

RT-PRC043AC-EN 111

Performance Data

Table 79. Evaporator fan performance—20 tons—YH*240G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory 5-hp Standard Motor & Drive

4000 (a)

4800 (a)

— — 465 0.92 494 1.06 522 1.20 549 1.35 576 1.51 602 1.66

463 1.07 493 1.22 524 1.39 552 1.56 578 1.72 601 1.89 624 2.06

5600 (a)

— — — — 474 1.29 501 1.46 528 1.63 555 1.80 581 1.98 607 2.17 632 2.37 655 2.56

6400 454 1.43 487 1.61 517 1.77 544 1.95 568 2.14 591 2.33 615 2.52 638 2.72 661 2.92 684 3.14

7200 502 1.98 533 2.19 561 2.38 587 2.56 610 2.76 632 2.97 653 3.19 674 3.41 695 3.63 715

8000 550 2.64 579 2.89 606 3.12 631 3.32 653 3.53 674 3.75 694 3.98 713 4.22 732 4.47 751

8800 599 3.46 627 3.75 652 4.00 675 4.23 697 4.45 718 4.69 737 4.93 755 5.18 773 5.44 790

9600 648 4.44 674 4.74 698 5.04 721 5.33 742 5.56 761 5.80 780 6.05 798 6.30 815 6.58 832

5-hp Standard Motor &

High Static Drive Accessory

7.5-hp Oversized Motor &

Field Supplied Motor Sheave (b)

7.5-hp Oversized

Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

3.84

4.70

5.71

6.86 cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor Drive 5-hp Standard Motor & High Static Drive Accessory

4000 (a)

4800 (a)

627 1.82 649 1.98 670 2.13 690 2.29 709 2.45 728 2.61 745 2.77 763 2.93 779 3.09 796 3.26

647 2.24 670 2.42 693 2.61 714 2.80 735 2.99 755 3.18 774 3.36 792 3.55 809 3.74 825 3.92

5600 (a)

677 2.76 697 2.96 717 3.15 736 3.36 755 3.56 775 3.78 795 3.99 814 4.21 832 4.43 850 4.65

6400 706 3.36 727 3.58 748 3.81 766 4.03 784 4.26 802 4.48 819 4.71 836 4.94 853 5.18 870 5.42

7200 735 4.07 756 4.31 776 4.56 795 4.80 815 5.06 833 5.31 850 5.57 867 5.81 883 6.06 899

8000 770 4.94 788 5.18 806 5.44 825 5.69 843 5.96 861 6.23 879 6.51 896 6.79 913 7.07 930

8800 807 5.97 825 6.23 841 6.50 858 6.77 875 7.03 891 7.30 908 7.58 925 7.89 941 8.19 958

9600 848 7.14 864 7.43 879 7.73 895 8.01 911 8.30 926 8.59 — — — — — — —

6.32

7.36

8.49

7.5-hp Oversized Motor & Drive

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Field supplied motor sheave 1VP50 x 1 1/8 required.

112 RT-PRC043AC-EN

Performance Data

Table 80. Evaporator fan performance—20 tons—YHD240G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5-hp Standard Motor & Low Static Drive Accessory 5-hp Standard Motor & Drive

4000 (a)

4800 (a)

— — 464 0.91 493 1.05 521 1.20 548 1.34 575 1.50 601 1.66

461 1.07 492 1.21 522 1.38 551 1.54 576 1.71 600 1.88 623 2.05

5600 (a)

— — — — 472 1.28 500 1.45 527 1.62 553 1.79 579 1.96 605 2.15 630 2.35 654 2.55

6400 451 1.42 485 1.60 515 1.76 541 1.93 566 2.12 589 2.32 613 2.51 636 2.70 658 2.90 681 3.12

7200 499 1.96 531 2.18 559 2.36 584 2.55 607 2.74 630 2.95 651 3.17 672 3.38 692 3.60 713

8000 548 2.64 577 2.88 603 3.10 627 3.29 650 3.50 672 3.72 691 3.95 711 4.19 730 4.43 748

3.82

4.67

8800 596 3.45 623 3.71 649 3.97 672 4.21 694 4.43 715 4.66 734 4.89 752 5.13 770 5.39 787 5.66

(b)

9600 645 4.41 670 4.70 694 4.98 717 5.26 738 5.52 758 5.76 777 6.00 795 6.25 812 6.52 829 6.80

5-hp Standard Motor

& High Static Drive

Accessory

7.5-hp Oversized Motor

& Field Supplied Motor Sheave (c)

7.5-hp Oversized Motor & Drive

Continued

1.10

1.20

1.30

External Static Pressure (Inches of Water)

1.40

1.50

1.60

1.70

1.80

1.90

2.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

4000 (a)

4800 (a)

5600 (a)

5-hp Standard Motor Drive 5-hp Standard Motor & High Static Drive Accessory

626 1.81 648 1.97 669 2.12 689 2.28 708 2.44 726 2.60 744 2.76 762 2.92 778 3.08 795 3.25

645 2.23 668 2.41 691 2.60 713 2.79 734 2.98 754 3.16 772 3.35 790 3.54 807 3.72 824 3.91

675 2.74 695 2.94 715 3.14 734 3.34 753 3.54 773 3.76 793 3.97 812 4.19 831 4.41 849 4.63

6400 704 3.34 725 3.56 746 3.79 764 4.01 783 4.23 800 4.46 817 4.69 834 4.91 851 5.15 868 5.39

7200 733 4.04 753 4.28 773 4.52 793 4.77 812 5.02 831 5.28 848 5.53 865 5.78 881 6.03 896

8000 767 4.91 785 5.15 804 5.40 822 5.65 840 5.92 858 6.19 876 6.46 894 6.75 911 7.03 927

8800 805 5.93

(d) 822 6.19 839 6.45 855 6.72 872 6.99 888 7.25 905 7.54 922 7.83 938 8.13 955

— — — — — — 9600 845 7.09 861 7.38 876 7.67 892 7.96 907 8.24 923 8.52 —

7.5-hp Oversized Motor

& Field Supplied Motor Sheave (c)

7.5-hp Oversized Motor & Drive

6.29

7.31

8.43

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)5-hp Standard Motor & High Static Drive Accessory

(c) Field supplied motor sheave 1VP50 x 1 1/8 required.

(d)7.5-hp Oversized Motor & Field Supplied Motor Sheave (c)

RT-PRC043AC-EN 113

Performance Data

Table 81. Evaporator fan performance—25 tons—TH*300G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

5000 (a)

6500 (a)

7000 (a)

7500 (a)

— — — — 575 1.75 599 1.93 622 2.10

579 2.26 603 2.46 626 2.65 648 2.85 671 3.06

— — 580 2.42 603 2.63 625 2.83 646 3.05 668 3.25 689 3.47

579 2.65 604 2.84 627 3.04 648 3.26 669 3.48 689 3.71 709 3.93

8000

8500

— — 577 2.87 603 3.10 628 3.30 651 3.51 672 3.73 692 3.96 711 4.20 730 4.44

574 3.09 602 3.34 628 3.60 653 3.83 675 4.04 696 4.25 716 4.49 735 4.74 753 5.00

9000 572 3.31 600 3.58 628 3.87 654 4.15 678 4.40 700 4.63 720 4.86 740 5.08 759 5.34 777 5.60

9500 600 3.85 628 4.17 655 4.47 680 4.75 703 5.02 724 5.27 745 5.52 764 5.76 783 6.00 801 6.28

10000 627 4.42 656 4.78 681 5.09 705 5.41 728 5.71 749 5.99 770 6.26 789 6.50 807 6.76 825 7.02

10500 657 5.13 683 5.45 708 5.80 731 6.13 753 6.44 775 6.76 794 7.04 813 7.31 831 7.57 849 7.84

11000 685 5.81 711 6.21 735 6.58 758 6.93 778 7.23 800 7.58 819 7.88 838 8.19 856 8.45 —

7.5-hp Standard Motor & High Static Drive Accessory

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

5000 (a)

6500 (a)

7000 (a)

644

693

710

2.28 666

3.28 715

3.68 731

2.46 688

3.50 736

3.91 752

2.65 710

3.73 757

4.15 772

2.85 731

3.96 775

4.40 792

3.04

4.19

4.64

7500 (a)

729 4.16 748 4.38 768 4.62 787 4.87 807 5.13

8000 749 4.68 768 4.92 786 5.16 804 5.41 823 5.66

8500 771 5.25 789 5.51 806 5.76 824 6.02 841 6.28

9000 794 5.87 811 6.14 827 6.41 844 6.69 861 6.95

9500 817 6.55 834 6.83 850 7.12 866 7.41 882 7.69

10000 841 7.29 857 7.59 873 7.87 888 8.18 904 8.48

10500 865 8.11 881 8.41 —

11000 — — — — —

7.5-hp Standard Motor & High Static Drive Accessory

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

114 RT-PRC043AC-EN

Performance Data

Table 82. Evaporator fan performance—25 tons—THD300G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive

5000 (a)

6500 (a)

7000 (a)

7500 (a)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

602 1.57

633 1.73

661 1.89

688 2.05

587 2.00

614 2.18

640 2.35

665 2.53

690 2.70

714 2.89

739 3.08

588 2.19

616 2.39

641 2.57

666 2.75

690 2.94

713 3.13

736 3.32

759 3.52

593 2.42

620 2.63

645 2.82

670 3.02

693 3.21

716 3.41

738 3.61

760 3.82

782 4.02

8000 597 2.66

625 2.89

650 3.09

674 3.29

698 3.51

722 3.73

743 3.93

765 4.15

785 4.36

806 4.57

8500 632 3.18

658 3.41

683 3.64

706 3.86

728 4.07

750 4.29

771 4.51

792 4.74

812 4.97

832 5.20

9000 666 3.74

692 4.00

714 4.22

737 4.46

757 4.67

779 4.92

799 5.15

819 5.39

839 5.64

858 5.88

9500 701 4.38

726 4.67

746 4.87

769 5.15

788 5.36

808 5.61

828 5.86

847 6.10

866 6.36

885 6.62

10000 737 5.11

760 5.39

778 5.60

800 5.89

819 6.11

838 6.37

858 6.64

876 6.89

895 7.17

913 7.45

10500 766 5.76

792 6.15

813 6.44

832 6.70

851 6.96

869 7.21

888 7.50

905 7.75

923 8.05

941 8.33

11000 806 6.73

824 6.98

844 7.27

864 7.56

883 7.88

900 8.14

918 8.44

7.5-hp Standard Motor & Drive

-

7.5-hp Standard Motor & High Static Drive Accessory

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor &

Low Static Drive

7.5-hp Standard Motor & Drive

5000 (a)

6500 (a)

712 2.20

736 2.36

758 2.52

779 2.67

799 2.82

763 3.28

787 3.48

810 3.69

833 3.90

855 4.11

7000 (a)

7500 (a)

782 3.73

805 3.94

827 4.15

849 4.37

871 4.59

803 4.23

825 4.44

846 4.66

867 4.89

888 5.12

8000 826 4.79

846 5.01

867 5.24

886 5.47

906 5.71

8500 851 5.42

870 5.65

889 5.88

908 6.12

927 6.37

9000 876 6.11

895 6.36

913 6.61

931 6.85

949 7.09

9500 903 6.88

921 7.13

938 7.38

955 7.63

973 7.89

10000 930 7.70

947 7.97

964 8.22

981 8.50

-

10500 958 8.60

11000 -

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive Accessory

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

RT-PRC043AC-EN 115

Performance Data

Table 83. Evaporator fan performance—25 tons—YH*300G

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Drive

5000 (a)

6500 (a)

7000 (a)

7500 (a)

— — — — 586 1.83 609 2.00 632 2.18

596 2.41 619 2.60 642 2.80 664 3.00 687 3.22

— — 599 2.59 621 2.80 643 3.01 665 3.22 686 3.43 707 3.65

603 2.83 626 3.03 648 3.25 668 3.47 688 3.70 708 3.92 728 4.15

8000 — — — — 606 3.12 631 3.32 653 3.53 674 3.75 694 3.98 713 4.22 732 4.47 751

8500 582 3.16 609 3.41 635 3.66 658 3.87 680 4.09 701 4.31 721 4.55 739 4.80 757 5.05 775

9000 611 3.68 639 3.99 664 4.25 687 4.49 708 4.73 728 4.95 748 5.18 766 5.44 783 5.71 800

9500 644 4.36 668 4.60 692 4.89 715 5.16 736 5.41 756 5.66 775 5.89 793 6.15 810 6.43 826

10000 676 5.05 698 5.31 722 5.62 744 5.93 764 6.19 784 6.44 802 6.68 820 6.95 837 7.22 853

10500 703 5.70 728 6.07 752 6.43 772 6.72 792 7.00 811 7.27 829 7.54 847 7.81 864 8.08 880

11000 739 6.65 759 6.93 780 7.27 801 7.58 821 7.92 840 8.23 857 8.48 —

7.5-hp Standard Motor & High Static Drive Accessory

— — — —

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

4.70

5.31

5.98

6.71

7.51

8.38

7.5-hp Standard Motor & Drive

5000 (a)

6500 (a)

7000 (a)

653 2.36 675 2.54 697 2.74 719 2.93 740 3.13

709 3.44 731 3.67 751 3.90 770 4.13 788 4.35

727 3.88 748 4.11 769 4.36 789 4.60 808 4.85

7500 (a)

748 4.37 767 4.61 787 4.86 806 5.12 825 5.38

8000 770 4.94 788 5.18 806 5.44 825 5.69 843 5.96

8500 793 5.57 811 5.83 828 6.08 845 6.34 862 6.61

9000 817 6.25 834 6.52 851 6.79 867 7.06 884 7.34

9500 843 6.99 858 7.27 875 7.57 890 7.84 906 8.13

10000 869 7.79 884 8.10 899 8.39 — — — —

10500

11000

7.5-hp Standard Motor & High Static Drive Accessory

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

116 RT-PRC043AC-EN

Performance Data

Table 84. Evaporator fan performance—25 tons—YHD300G—dehumidification (hot gas reheat) option

0.10

0.20

0.30

External Static Pressure (Inches of Water)

0.40

0.50

0.60

0.70

0.80

0.90

1.00

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

7.5-hp Standard Motor & Low Static Drive Accessory

5000 (a)

6500 (a)

7000 (a)

7500 (a)

-

-

-

-

-

-

-

-

-

-

-

-

584 1.48

613 1.63

642 1.78

670 1.94

696 2.10

606 2.13

633 2.30

658 2.47

683 2.65

708 2.84

732 3.03

756 3.22

585 2.17

612 2.36

637 2.54

662 2.72

686 2.91

710 3.10

733 3.30

756 3.49

779 3.70

593 2.44

618 2.60

645 2.82

668 3.01

692 3.20

716 3.41

737 3.60

760 3.81

781 4.01

803 4.23

8000 626 2.88

654 3.12

677 3.32

700 3.53

723 3.75

745 3.95

767 4.17

788 4.38

808 4.60

829 4.82

8500 665 3.48

688 3.68

711 3.90

733 4.13

755 4.35

776 4.57

797 4.80

816 5.02

836 5.25

855 5.47

9000 702 4.11

723 4.31

745 4.54

766 4.78

787 5.02

807 5.26

827 5.49

846 5.73

865 5.97

884 6.21

9500 734 4.72

758 5.01

780 5.27

799 5.49

820 5.77

838 5.99

858 6.27

876 6.50

895 6.76

913 7.02

10000 771 5.49

796 5.83

815 6.09

835 6.34

852 6.55

871 6.82

889 7.10

907 7.35

925 7.63

942 7.89

10500 814 6.50

831 6.68

848 6.90

869 7.23

886 7.46

903 7.73

921 8.00

939 8.30

956 8.57

-

11000 848 7.34

866 7.61

885

7.5-hp Standard Motor & Drive

7.92

903 8.19

920 8.46

-

7.5-hp Standard Motor & High Static Drive Accessory

-

Continued

External Static Pressure (Inches of Water)

1.10

1.20

1.30

1.40

1.50

cfm rpm bhp rpm bhp rpm bhp rpm bhp rpm bhp

5000 (a)

6500

7000

(a)

(a)

722 2.27

(b) 746

7.5-hp Standard Motor & Drive

2.43

770 2.60

791 2.76

812 2.92

779 3.41

801 3.61

823 3.81

845 4.01

866 4.22

801 3.90

822 4.10

844 4.31

865 4.53

885 4.75

7500 (a)

824 4.44

845 4.66

866 4.88

886 5.10

905 5.32

8000 849 5.05

869 5.27

889 5.51

908 5.73

927 5.97

8500 875 5.72

895 5.96

913 6.19

932 6.43

951 6.68

9000 902 6.45

921 6.71

938 6.94

956 7.19

975 7.46

9500 930 7.26

948 7.52

965 7.77

983 8.04

10000 959 8.15

976 8.41

-

-

-

-

-

10500

11000

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

7.5-hp Standard Motor & High Static Drive Accessory

-

-

Notes:

1.

For Standard Evaporator Fan Speed (rpm), reference Table 86, p. 118

.

2.

For High Evaporator Fan Speed (rpm), reference

Table 87, p. 118

.

3.

For Oversized Evaporator Fan Speed (rpm), reference Table 88, p. 119 .

4.

Fan motor heat (MBh) = 3.15 x Fan bhp.

5.

Data includes pressure drop due to standard filters and wet coils. No accessories or options are included in pressure drop data.

6.

For all non-standard sheave combinations, please refer to accessory installer’s guides ACC-SVN34*-EN and ACC-SVN72*-EN.

7.

Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)7.5-hp Standard Motor & Low Static Drive Accessory.

RT-PRC043AC-EN 117

Performance Data

Table 85. Standard motor and drive/fan speed (rpm)

Tons Unit Model Number

12½

15

T/YS*150G3,4,W,K

T/YH*150G3,4,W

T/YS*180G3,4,W,K

T/YH*180G3,4,W

17½ T/YS*210/211G3,4,W,K

T/YH*210G3,4,W

T/YS*240G3,4,W,K 20

T/YH*240G3,4,W

T/YS*300/301G3,4,W,K

T/YH*300G3,4,W

25

T/YH*300G3,4,W with

Reheat

Note: Factory set at 3 turns open.

6 Turns

Open

605

506

605

506

694

581

642

452

559

452

694

5 Turns

Open

650

544

650

544

731

619

683

485

600

485

739

4 Turns

Open

695

582

695

582

768

657

725

518

642

518

784

3 Turns

Open

740

620

740

620

805

695

766

551

683

551

829

2 Turns

Open

785

658

785

658

842

733

808

584

725

584

874

1 Turn

Open

829

694

829

694

881

769

849

619

766

619

919

Closed

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Table 86. Standard motor and low static fan drive

Tons

12½

15

17½

20

25

Unit Model Number

T/YS*150G3,4,W,K

T/YH*150G3,4,W

T/YS*180G3,4,W,K

T/YH*180G3,4,W

T/YS*210/211G3,4,W,K

T/YH*210G3,4,W

T/YS*240G3,4,W,K

T/YH*240G3,4,W

T/YS*300/301G3,4,W,K

T/YH*300G3,4,W with

Reheat

6 Turns

Open

452

450

506

450

581

351

452

351

506

581

5 Turns

Open

485

480

544

480

619

377

485

377

544

619

4 Turns

Open

518

510

582

510

657

403

518

403

582

657

3 Turns

Open

551

540

620

540

695

429

551

429

620

695

2 Turns

Open

584

570

658

570

733

455

584

455

658

733

1Turn

Open Closed

619 N/A

600

694

600

769

480

619

480

694

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

769 N/A

Table 87. Standard motor and high static drive accessory sheave/fan speed (rpm)

Tons

12½

15

17½

20

25

Unit Model Number

T/YS*150G3,4,W,K

T/YH*150G3,4,W

T/YS*180G3,4,W,K

T/YH*180G3,4,W

T/YS*210/211G3,4,W,K

T/YH*210G3,4,W

T/YS*240G3,4,W,K

T/YH*240G3,4,W

T/YS*300/301G3,4,W,K

T/YH*300G3,4,W

T/YH*300G3,4,W with

Reheat

6 Turns

Open

694

829

694

806

694

766

619

719

619

829

806

5 Turns

Open

731

874

731

844

739

808

652

753

652

874

844

4 Turns

Open

768

919

768

882

784

849

685

786

685

919

882

3 Turns

Open

805

964

805

920

829

891

718

820

718

964

920

2 Turns

Open

842

1009

842

958

874

891

751

853

751

1009

958

1 Turn

Open

881

1053

881

994

919

974

786

887

786

1053

994

Closed

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

118 RT-PRC043AC-EN

Performance Data

Table 88. Oversized motor and drive/fan speed (rpm)

Tons

12½

15

17½

20

Unit Model

Number

T/YS*150G3,4,W,K

T/YH*150G3,4,W

T/YS*180G3,4,W,K

T/YH*180G3,4,W

T/YS*210/211G3,4,W,K

T/YH*210G3,4,W

T/YS*240G3,4,W,K

T/YH*240G3,4,W

6 Turns

Open

863

695

695

695

806

806

806

806

5 Turns

Open

919

747

747

747

844

844

844

844

4 Turns

Open

974

799

799

799

882

882

882

882

3 Turns

Open

1030

851

851

851

920

920

920

920

2 Turns

Open

1085

903

903

903

958

958

958

958

1 Turn

Open Closed

1141 N/A

953

953

953

994

994

N/A

N/A

N/A

N/A

N/A

994

994

N/A

N/A

Table 89. Static pressure drop through accessories (inches water column)

Tons

12½

15

6000

2500

4000

5000

6000

4800

6000

7200

4000

5000

6000

4000

5000

6000

4000

5000

4800

6000

7200

4800

6000

7200

3000

4800

6000

7200

Unit Model

Number cfm (a)

Std

Filters (b)

Through

Reheat

Coil

2”

MERV 8

Filter (c)

2”

MERV 13

Filter

(c)

T/YSH150G

T/YSD150G

T/YHH150G

T/YHD150G

T/YSH180G

T/YSD180G

T/YHH180G

T/YHD180G

0.05

0.07

0.10 —

0.05

0.07

0.10 —

0.02 —

0.03 —

0.08

0.11

0.15

0.08

0.11

0.15

0.05 —

0.01 0.00 0.01 0.03

0.02 0.01 0.04 0.08

0.03 0.02 0.05 0.11

0.05 0.03 0.07 0.13

0.03 — 0.06

0.09

0.05 —

0.07 —

0.09

0.11

0.13

0.16

0.07

0.11

0.04 —

0.06 —

0.09 —

0.03 —

0.05 —

0.07 —

0.02 0.01

0.04 0.01

0.06 0.02

0.09 0.03

0.13

0.04

0.06

0.08

0.02

0.05

0.06

0.08

0.18

0.06

0.1

0.13

0.03

0.08

0.11

0.14

0.12

0.15

0.19

0.12

0.15

0.19

Std

Economizer with

OA/RA

Dampers (d)

100%

OA

100%

RA

Low Leak

Economizer with

OA/RA

Dampers (d)

Electric Heater

Accessory (kW)

100%

OA

100%

RA 14–27 36 54

(e)

72

0.33

0.07

0.19

0.26

0.33

0.14

0.19

0.26

0.33

0.19

0.26

0.33

0.19

0.26

0.27

0.14

0.27

0.14

0.27

0.07

0.14

0.2

0.27

0.04

0.01

0.02

0.03

0.04

0.03

0.02

0.03

0.04

0.02

0.03

0.04

0.02

0.03

0.05

0.03

0.05

0.03

0.05

0.03

0.03

0.04

0.05

0.57

0.07

0.16

0.24

0.33

0.36

0.57

0.81

0.27

0.42

0.61

0.27

0.41

0.58

0.25

0.39

0.22

0.33

0.45

0.36

0.57

0.81

0.10

0.22

0.33

0.45

0.10

0.04

0.10

0.16

0.24

0.06

0.10

0.14

0.06

0.10

0.14

0.18

0.29

0.44

0.04

0.07

0.15

0.24

0.35

0.06

0.10

0.14

0.06

0.15

0.24

0.35

0.07

*

0.03

0.05

0.07

0.04

0.07

0.03

0.05

0.07

0.03

0.05

0.07

0.03

0.05

0.06

*

0.03

0.04

0.06

0.04

0.06

0.09

0.03

0.04

0.06

0.03

0.04

0.06

0.03

0.04

0.04

0.06

0.09

0.04

0.06

0.09

*

0.04

0.06

0.09

0.04

0.07

0.04

0.07

*

0.04

0.07

0.1

0.09

*

0.04

0.06

0.09

0.05

0.08

0.04

0.06

0.09

0.04

0.06

0.09

0.04

0.06

0.05

0.08

0.05

0.08

*

0.05

0.08

0.12

RT-PRC043AC-EN 119

Performance Data

Table 89. Static pressure drop through accessories (inches water column) (continued)

Tons

17½

20

25

Unit Model

Number cfm (a)

Std

Filters (b)

Through

Reheat

Coil

2”

MERV 8

Filter (c)

2”

MERV 13

Filter (c)

T/YSH210/

211G

T/YSD210/

211G

T/YHH210G

T/YHD210G

T/YSH240G

T/YSD240G

T/YHH240G

T/YHD240G

T/YSH300/

301G

T/YSD300/

301G

T/YHH300G

T/YHD300G

8000

9600

7000

9000

11000

7000

9000

11000

6400

8000

9600

6400

8000

9600

4000

6400

7000

9000

11000

5000

7000

9000

11000

8400

3500

5600

7000

8400

6400

8000

9600

5600

7000

8400

5600

7000

8400

5600

7000

0.05 —

0.07 —

0.10 —

0.06 —

0.09 —

0.12 —

0.03 —

0.05 —

0.07 —

0.01 0.04

0.04 0.10

0.06 0.13

0.08 0.16

0.06 —

0.09 —

0.13 —

0.02 0.04

0.05 0.10

0.08 0.13

0.10 0.16

0.17

0.21

0.07 —

0.11 —

0.16 —

0.04 —

0.06 —

0.09 —

0.02 0.02 0.03 0.06

0.05 0.05 0.08 0.12

0.08 0.07 0.10 0.15

0.11 0.11 0.14 0.19

0.07

0.11

0.11

0.15

0.15

0.20

0.17

0.09

0.14

0.21

0.22

0.13

0.18

0.25

0.26

0.17

0.23

0.32

0.05 —

0.08 —

0.12 —

0.03 0.02

0.06 0.04

0.10 0.06

0.10

0.08

0.04 0.08

0.09 0.13

0.12 0.18

0.17

0.22

Std

Economizer with

OA/RA

Dampers (d)

100%

OA

100%

RA

Low Leak

Economizer with

OA/RA

Dampers (d)

Electric Heater

Accessory (kW)

100%

OA

100%

RA 14–27 36 54

(e)

72

0.32

0.44

0.26

0.4

0.6

0.26

0.4

0.57

0.22

0.32

0.44

0.22

0.32

0.44

0.11

0.22

0.26

0.4

0.6

0.15

0.26

0.4

0.57

0.35

0.09

0.18

0.26

0.35

0.22

0.32

0.44

0.18

0.26

0.35

0.18

0.26

0.35

0.18

0.26

0.05

0.07

0.04

0.07

0.1

0.04

0.07

0.1

0.04

0.05

0.07

0.04

0.05

0.07

0.03

0.04

0.04

0.07

0.1

0.03

0.04

0.07

0.10

0.06

0.03

0.04

0.04

0.06

0.04

0.05

0.07

0.04

0.04

0.06

0.04

0.04

0.06

0.04

0.04

0.54

0.75

0.77

1.27

1.89

0.43

0.67

0.95

0.37

0.54

0.75

0.64

1.0

1.44

0.16

0.37

0.77

1.27

1.89

0.24

0.43

0.67

0.95

1.11

0.13

0.29

0.43

0.59

0.64

1.0

1.44

0.49

0.77

1.11

0.29

0.43

0.59

0.49

0.77

0.43

0.62

0.13

0.21

0.32

0.33

0.55

0.82

0.27

0.43

0.62

0.11

0.17

0.24

0.10

0.27

0.13

0.21

0.32

0.16

0.33

0.55

0.82

0.19

0.08

0.21

0.33

0.48

0.11

0.17

0.24

0.08

0.13

0.19

0.21

0.33

0.48

0.08

0.13

0.08

0.13

0.18

*

0.08

0.13

0.18

0.05

0.08

0.12

0.05

0.08

0.12

0.05

0.08

0.12

*

0.05

0.08

0.13

*

0.06

0.09

0.12

0.06

0.13

0.08

0.10 0.12

0.14

0.17

0.06

0.09

0.13

0.06

0.09

0.13

0.06

0.09

0.06

0.08

0.10 0.12

0.14

0.06

0.17

0.08

0.10 0.12

0.14

0.17

*

0.06

*

0.08

0.10 0.12

0.14

0.17

0.08

0.13

0.14

0.20

0.10 0.11

0.15

0.18

0.18

0.08

0.13

0.18

0.22

0.15

0.22

0.26

0.10 0.11

0.18

0.26

0.09

0.14

0.20

0.09

0.14

0.20

*

0.09

0.10 0.11

0.15

0.18

0.22

*

0.26

*

0.1

0.15

0.22

0.11

0.18

0.26

0.07

0.11

0.16

0.07

0.11

0.16

0.07

0.11

0.16

*

0.07

0.11

0.16

0.09

0.14

0.20

(a)Unit applications below 320 cfm/ton are only applicable to Constant Volume THD models without electric heat and YHD models equipped with modulating gas heat. See below for restrictions:

- Electric heaters on applications below 320 cfm/ton.

- Frostat and Crankcase heaters are required on applications below 320 cfm/ton.

- Multi-speed, single zone VAV or multi-zone VAV applications are capable of running below 320 cfm/ton during low speed airflow operation, but "full" airflow must be set to 320 cfm/ton or higher.

(b)Tested with: 2” filters 12½–25 tons.

(c) Difference in pressure drop should be considered when utilizing optional 2” pleated filters.

(d)OA = Outside Air and RA = Return Air.

(e)Nominal kW ratings at 240, 480, 600 volts.

120 RT-PRC043AC-EN

Performance Data

Table 90. Gas fired heating capacities

Tons Unit Model Number Heating Input MBh (a)

Heating Output MBh (a)

12½

15

17½

YS/H*150G-L1

YS/H*150G-H1

150/100

250/175

YS/H*150G-V1 350/140

YS/H*180G-L1 250/175

YS/H*180G-H1

YS/H*180G-V1

YS/H*210G-L1

YS/H*210G-H1

350/250

350/140

250/175

350/250

120/80

200/140

280/112

200/140

280/200

280/112

200/140

280/200

20

YS/H*210G-V1

YS/H*240G-L1

YS/H*240G-H1

YS/H*240G-V1

350/140

250/175

400/300

350/140

280/112

200/140

320/240

280/112

25

YS/H*300G-L1

YS/H*300G-H1

250/175

400/300

200/140

320/240

YS/H*300G-V1 350/140 280/112

(a)For two stage heaters (input or output), second stage is total heating capacity. Second stage/first stage.

Air Temp. Rise, °F

35–65

15–45

25–55

35–65

15–45

25–55

35–65

10–40

25–55

35–65

25–55

35–65

35–65

25–55

35–65

Table 91. Auxiliary electric heat capacity

Tons Unit Model Number kW

Input

Total (a)

(b)

MBh

Output

No. of

Stages kW

Input

MBh

Output kW

Input

12½–15

TS/H*150G3,4,W

TS/H*180G3,4,W

18.00

27.00

(c)

36.00

54.00

61.47

92.15

122.94

184.41

1

2

2

2

18.00

9.00

18.00

36.00

61.47

30.72

61.47

122.94

18.00

18.00

18.00

17½–25

TS/H*210/211G3,4,W

TS/H*240G3,4,W

TS/H*300/301G3,4,W

36.00

54.00

122.94

184.41

2

2

18.00

36.00

61.47

122.94

18.00

18.00

72.00

245.88

2 36.00

122.94

36.00

(a)Heaters are rated at 240V, 380V, 480V, and 600V. For other than rated voltage, CAP = (voltage/rated voltage) 2 x rated cap.

(b)For all input/output categories, does not include fan power or heat.

(c) 27 kW heater can be used with TSD180F4, TSD210F4, TSD240F4, and TSD300F4 only. Cannot be used with oversized motor.

* Indicates both downflow and horizontal units.

MBh

Output

61.43

61.47

61.47

61.47

61.47

122.94

RT-PRC043AC-EN 121

Performance Data

Table 92. Electric heater voltage correction factors (applicable to auxiliary heat capacity)

Nominal

Voltage

240

480

600

Distribution

Voltage

208

230

240

440

460

480

540

575

600

Capacity

Multiplier

0.75

0.92

1.00

0.84

0.94

1.00

0.81

0.92

1.00

Table 93. Air temperature rise across electric heaters (°F) kW

9.00

Stages

1

12½ Tons

5000 cfm

Three Phase

TS*150G

TH*150G

15 Tons

6000 cfm

Three Phase

TS*180G

TH*180G

17½ Tons

7000 cfm

Three Phase

TS*210/211G

TH*210G

20 Tons

8000 cfm

Three Phase

TS*240G

TH*240G

25 Ton

9000 cfm

Three Phase

TS*300/301G

TH*300G

17.30

18.00

27.00

36.00

54.00

72.00

1

1

2

2

2

2

11.4

22.8

34.1

9.5

14.2

(a)

19.0

28.5

12.2

16.3

24.4

32.5

10.7

14.2

21.3

28.5

9.5

12.6

19.0

25.3

Notes:

1.

For minimum design airflow, see airflow performance table for each unit. To calculate temp rise at different airflow, use the following formula:

Temp. rise across Electric Heater = kW x 3414/1.08 x cfm.

2.

*Indicates both downflow and horizontal units.

(a)27 kW heater can be used with TSD180F4, TSD210F4, TSD240F4, and TSD300F4 only. Cannot be used with oversized motor.

Table 94. Hot gas reheat temperature rise (a), (b)

Tons

12½

SCFM

2500

3000

3500

4000

4500

5000

5500

6000

Leaving Evaporator Dry Bulb [°F] (c)

35 40 45 50 55 60 65

30.6 31.8 32.9 33.8 34.7 35.5 36.2

25.7 26.8 27.8 28.7 29.5 30.2 30.8

22.2 23.2 24.1 24.9 25.6 26.3 26.9

19.4 20.4 21.2 22.0 22.6 23.2 23.8

17.3 18.2 19.0 19.7 20.3 20.9 21.5

15.6 16.4 17.2 17.8 18.4 19.0 19.5

14.2 15.0 15.7 16.3 16.9 17.4 17.9

13.0 13.8 14.5 15.1 15.6 16.1 16.5

122 RT-PRC043AC-EN

Performance Data

Table 94. Hot gas reheat temperature rise (a), (b)

Tons SCFM

3000

Leaving Evaporator Dry Bulb [°F] (c)

35 40 45 50 55 60 65

30.4 31.5 32.5 33.3 34.1 34.9 35.5

6400

7200

8000

8800

9600

5000

7000

7700

8400

4000

4800

5600

7200

3500

4200

4900

5600

6300

3600

4200

4800

5400

6000

6600

15

17½

20

25

5800

6600

7400

8000

8800

9600

10400

25.4 26.4 27.3 28.1 28.8 29.4 30.0

21.9 22.8 23.6 24.4 25.1 25.7 26.3

19.1 20.0 20.8 21.5 22.2 22.7 23.3

17.0 17.8 18.6 19.2 19.8 20.4 20.9

15.3 16.1 16.8 17.4 18.0 18.5 19.0

13.9 14.7 15.3 15.9 16.4 16.9 17.4

12.7 13.5 14.1 14.7 15.2 15.6 16.1

34.5 37.9 41.5 45.2 48.5 50.6 50.6

28.0 30.9 33.9 36.8 39.6 42.0 43.8

23.5 26.0 28.6 31.4 34.0 36.2 37.9

20.3 22.4 24.7 27.2 29.7 31.9 33.5

17.9 19.7 21.7 23.8 26.1 28.3 29.9

16.0 17.5 19.3 21.3 23.4 25.3 26.9

14.4 15.8 17.4 19.2 21.1 23.0 24.5

13.2 14.4 15.8 17.4 19.3 21.0 22.5

30.5 31.8 33.0 34.0 35.0 35.8 36.6

25.5 26.7 27.8 28.8 29.6 30.4 31.2

21.8 23.0 24.0 24.9 25.7 26.4 27.1

19.1 20.2 21.1 22.0 22.8 23.4 24.1

17.0 18.0 18.9 19.6 20.3 21.0 21.6

15.3 16.2 17.1 17.8 18.5 19.1 19.6

13.9 14.8 15.6 16.3 16.9 17.5 18.0

12.7 13.6 14.3 15.0 15.6 16.1 16.6

25.5

27.3

29.03

30.4

31.7

32.5

32.4

21.9

19.2

17.1

15.8

14.3

13.1

12.1

23.5

20.7

18.4

17

15.5

14.2

13.1

25.1

22.1

19.7

18.3

16.6

15.2

14

11200

12000

11.2

10.4

12.1

11.2

(a) 70°F OD Ambient Temperature.

(b) For units with the Dehumidification (Hot Gas Reheat) option.

(c) Temperature does not account for indoor fan heat.

13

12.2

26.5

23.4

20.9

19.3

17.6

16.2

14.9

13.9

13

27.5

24.3

21.7

20.3

18.7

17.1

15.8

14.7

13.7

28.4

25.2

22.7

21.1

19.2

17.7

16.4

15.1

14.2

28.8

25.7

23.2

21.6

19.8

18.3

16.9

15.8

14.8

RT-PRC043AC-EN 123

advertisement

Related manuals