- Home
- Domestic appliances
- Climate control
- Split-system air conditioners
- TECHNIBEL
- MPAF240R5IAA
- Operating instructions
Operation with the Remote Control Unit. TECHNIBEL MPAF240R5IAA, MPAF180R5IAA 28 Pages
Operation with the Remote Control Unit. TECHNIBEL MPAF240R5IAA, MPAF180R5IAA
Add to My manuals28 Pages
advertisement
![Operation with the Remote Control Unit. TECHNIBEL MPAF240R5IAA, MPAF180R5IAA | Manualzz Operation with the Remote Control Unit. TECHNIBEL MPAF240R5IAA, MPAF180R5IAA | Manualzz](http://s2.manualzz.com/store/data/062472329_1-cc930bfb5f7c2130ddc4632e0ef071f3-360x466.png)
1. Automatic Operation
Operation with the Remote Control
Unit
When the remote control’s S/M switch is at the “S” (Single) position
This unit automatically switches between cooling operation and heating operation according to the difference between the room temperature and the temperature setting.
When the remote control’s S/M switch is at the “M” (Multiple) position
Unlike when the switch is at the “S” position as described above, the function for automatically switching between cooling and heating does not work.
STEP 2
STEP 1
NOTE Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to the desired temperature simply by pressing the ON/OFF operation button.
STEP 1
STEP 2
Press the MODE selector button to .
Press the ON/OFF operation button.
NOTE
To stop the air conditioner, press the ON/OFF operation button again.
• To change the temperature setting; press the temperature setting buttons and change the setting to the desired temperature.
12
advertisement
Related manuals
advertisement
Table of contents
- 2 Features
- 3 Product Information
- 3 Alert Symbols
- 4 Installation Location
- 4 Electrical Requirements
- 4 Safety Instructions
- 5 Names of Parts
- 10 Using the Remote Control Unit
- 12 Operation with the Remote Control Unit
- 12 1. Automatic Operation
- 13 2. Manual Operation
- 14 3. Adjusting the Fan Speed
- 14 4. Fan Only
- 15 5. Night Setback Mode
- 16 6. QUIET Mode
- 16 7. HIGH POWER Mode
- 16 8. LED CLEAN Mode
- 17 Special Remarks
- 18 Setting the Timer
- 20 Using the 1-Hour OFF Timer
- 20 Tips for Energy Saving
- 21 Adjusting the Airflow Direction
- 22 Operation without the Remote Control Unit
- 22 Care and Cleaning
- 25 Troubleshooting
- 25 Operating Range